General Electric Turbine Generator, Turbine Rating 18,328 KW, 3600 RPM, 15 Stages, turbine No. 178468. Generator No. 8357298, 2 Poles, 60 Cycle, W...

Worthington Turbine Generator, Turbine Frame T7X7Y3, Rating 12,500 K.W> At 3600 R.P.M, Inlet Steam Conditions - 850 psig. At 900 Deg. F.T.M., Cast...

General Electric Turbine Generator, Turbine No. 104783, Rating 7500 KW, 13 Stages, 3600 RPM, 9375 KW, Steam Pressure 400 PSIG; AC Generator, No. 6...

BULK BID FOR ALL LOTS--- THIS LOT WILL BE OFFERED FIRST IN BULK THEN BY THE PIECE. IF THE BIDS FOR THE BULK EXCEEDS THE BY THE PIECE BIDS THE BULK...

Hankison Air Dryer, m/n HHE-260, s/n 1426740-1, 100PSIG Max, 60-150 PSI, (Wire to be clipped 6" from outside panel)

Gardner Denver 50hp Electra-Saver II air compressor, model ECHQJF, (Wire to be clipped 6" from outside panel)

Turbine generator monitoring panel, (Wire to be clipped 6" from outside panel)

General Electric turbine generator monitoring panel, (Wire to be clipped 6" from outside panel)

Kennedy ball mill exhauster w/Allis-Chalmers 75 hp motor, 1170 rpm, s/n 1-5103-48142-6-1, fuel delivery pipe from exhauster to break at boiler, Cl...

Stock Equipment Co. Volumetric Feeder, No. 4884-1 w/coal gate to flange, (Wire to be clipped 6" from outside panel)

Hagan boiler 1 & Turbine generator 1 control consol, (Wire to be clipped 6" from outside panel)

WestingHouse boiler 2 & Turbine generator 2 control consol, (Wire to be clipped 6" from outside panel)

Metal two door storage cabinet with contents of filters and opacity monitoring componants

Exide Battery Charger, m/n SCR 130-1-16, s/n 77137-3/6812-MD, Input 120 volt AC, Output 130 volts DC, 16 amps, No. cells 60

4)Neundorfer Electric Precipitator Control Panels, (Wire to be clipped 6" from outside panel)

Kennedy ball mill exhauster w/Delco 20 hp motor 1160rpm, m/n G5658-Y1R, fuel delivery pipe to break at boiler, (Wire to be clipped 6" from outside...

Stock Equipment Co. Volumetric Feeder, No. 4105A, w/coal gate to flange, (Wire to be clipped 6" from outside panel)

Stock Equipment Co. Volumetric Feeder, No. 4105B, w/coal gate to flange, (Wire to be clipped 6" from outside panel)

Magnetic Technologies transformer, 100KVA, dry type, 3ph 60hz, s/n 360100K06HC01-2391, (Wire to be clipped 6" from outside panel)

CT (current transformer) for General Electric 18,328 kw Turbine, (Wire to be clipped 6" from outside panel)

Westinghouse breaker station w/5 - 24,000 volt breakers, (Wire to be clipped 6" from outside panel)

Electric Machinery Mfg. generator control switch gear, control s/n 1-71-1675-55, generator kva 15,625, line volts 12,500, line amps 721, control s...

General Electric Magne-Blast 25,000 amp circuit breaker, type AM-13.8-500-1, m/n 6351163AA,

Generator No. 1 neutral breaker panel & reactor w/General Electric Magne-Blast 25,000 amp circuit breaker, type AM-13.8-500-3, m/n 6351363AALPWH, ...

General Electric soft start motor control cabinet, (Wire to be clipped 6" from outside panel)

General Electric soft start motor control cabinet, (Wire to be clipped 6" from outside panel)

Foster Wheeler Condenser, No. 93-L4212, Surface area 12,500 Sq Ft., 10,800gpm capacity, Tube Type: brass and SS, approx. 3,470 brass tubes at 18ft...

Graham Mfg. Condenser, Surface area 12,500 Sq. Ft., 10,800 gpm, Tube Type: Brass and SS, approx. 3,480 brass tubes at 18 ft long, approx. 70 stain...

Condenser shell (no tubes)

Ingersoll Rand Condenser, Surface area 9,000 Sq. Ft., Tube Type: Brass 2866 tubes at 18ft long, 11,000 gpm

Generator No. 3 neutral breaker panel & reactor w/General Electric Magne-Blast 25,000 amp circuit breaker, type AM-13.8-500-1, m/n 6351163AA, s/n ...

Electric Machinery Transformer; 12500 volt, 3 phase, 60 cycle, serial 1-71-1675-28

Generator No. 4 neutral breaker panel & reactor w/General Electric Magne-Blast 25,000 amp circuit breaker, type AM-13.8-500-1, m/n 6351163AA, s/n ...

Pump w/Westinghouse 5 hp motor, 1750 rpm

Vacuum pump w/tank and General Electric 3 hp motor

Condensate pump w/General Electric 20 hp motor, 1760 rpm

Condensate pump w/General Electric 20 hp motor, 1760 rpm

Bingham Williamette feed water pump

Aurora Pump, assorted pipe fittings & valve

Ingersoll Rand Steam Jet Injector, S/n 10412, for GE 7.5 MW Turbine

3)Hydro Dyne Inc. Feed water heaters

Oil tank for turbine 4

Raymond Bowl coal pulverizing mill, s/n 83055, w/Siemens-Allis 75 hp motor, 1760 rpm

Raymond Bowl coal pulverizing mill, s/n 83053, w/Siemens-Allis 75 hp motor, 1760 rpm

Bingham steel pump sled, approx. 10'x4'

Oiling system and tank for No. 2 turbine

2)Feed water heaters

Kennedy Van Saun Mill, s/n 509-P-71, 6 1/2 ton per hour capicity @ 50 hargrove 80%-200 mesh, Allis Chalmers 200hp motor, 1775 RPM, 2300 volt

Worthington feed water pump w/Westinghouse 300 hp motor, m/n HSDP, 3551 rpm, frame 5008-H, 2300 volt, 2 pole, 3 phase, s/n 1S-72, (pump houseing i...

Worthington feed water pump w/general Electric 250 hp motor, 3565 rpm, m/n 5K447EK113V, frame TS447, 440 volt, s/n KA471008

Pump sled, approx. 8'x2' w/valve

Ingersoll-Rand feed water pump size 3x8DA-9, 370 gpm, Hydro psig 3000, Hd. Ft. 2680, s/n 1286046, w/Louis-Allis 400 hp motor, 3575 rpm, frame 501O...

Feed water pump w/westinghouse 125 hp motor, 3565 rpm, frame 444US, 440 volt, s/n 66C36969, (pump has crack in houseing)

Feed wter pump w/General Electric 125 hp motor, 3560 rpm, 440 volt, m/n 5K4444W1A3, s/n ZX525045

Steel pump sled, approx. 11'x3'

Westinghouse 15 hp motor, 1755 rpm, frame 284U, m/n ABLG

Transfer pump w/Westinghouse 15 hp motor, 1755 rpm, frame 284U, 220/440 volt, m/n ABLG

Pump w/Westinghouse 5 hp motor, 1750 rpm, s/n 8A783668

2)Pumps w/3 hp motors

Allen Bradley motor controls