A Rigging Quote has been added to each lot by Todd's Specialty Rigging.

Refine your search

Estimate

Filter by Price Range

Primary Category

Category

Brand

Item Type

State/Province

Town/City

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
There are 80 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240
Page of 2

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

Rigging charges are indicated under the Rigging/Removal Tab, have been provided by Todd's Specialty Rigging. Please deal directly with Todd to ar...

Approximately 1250mm wide x 9750mm long Polypropylene Vacuum Tray, Scrapper Discharge, with (1) Cake Forming Zone, (3) Cake Wash Zones, (1) Cake D...

Approximately 1250mm wide x 9750mm long Polypropylene Vacuum Tray, Scrapper Discharge, with (1) Cake Forming Zone, (3) Cake Wash Zones, (1) Cake D...

Size 1K1.5X1-82RV/6.50, 250 psi at 100F, with Baldor Reliance 3510 RPM Motor, 460V, 3PH, S/N 0909-9716A, (Process Water Booster Pump), (Loc. Build...

Size 1K1.5X1-82RV/6.50, 250 psi at 100F, with Baldor Reliance 3510 RPM Motor, 460V, 3PH, S/N 0909-9716B, (Process Water Booster Pump), (Loc. Build...

Size 1K3X1.5-82RV/6.62, 285 psi at 100F, with Baldor Reliance 3530 RPM Motor, 460V, 3PH, S/N 0909-9718-B, (Candle Filter Feed Pump), (Loc. Buildin...

(Supplied Lot 1033 Candle Filter Pressure Vessel), (Loc. Building 500 Wet Side),Rigging Charge:$75

0-2000mS/cm Range, -35 to 250 Degree F Temperature Range, S/N C900A005G00, (Supplied Lot 1032 Candle Filter Pressure Vessel), (Loc. Building 500 W...

9' Diameter x 15'-11" Straight Side, FRP (Fibreglass Reinforced Plastic)Flat Top, Dish Bottom, on Legs, Top Mounted Chemineer Model 21HTL-3 3 HP A...

9' Diameter x 15'-11" Straight Side, Flat Top, Dish Bottom, on Legs, Top Mounted Chemineer Model 21HTL-3 3 HP Agitator Drive with 2-Tier 3-Blade P...

8' Diameter x 21'-8" Straight Side, Flat Bottom, Dish Top, Built 2009, S/N 11570, (Loc. Building 500 Wet Side),Rigging Charge:$2200

Size 1K3X1.5-82RV/7.06, 285 psi at 100F, with Baldor Reliance 3530 RPM Motor, 460V, 3PH, S/N 0909-9717, (Brine Discharge Pump), (Loc. Building 500...

36" diameter x 20" Straight Shell Side, on Legs, S/N 020095, Built 2001, (Loc. Building 500 Wet Side),Rigging Charge:$65

13.2 GPM, 3/4 HP, 110/95 PSI/Fmax, 110-120V, 1PH, S/N 0705277A, (Loc. Building 500 Wet Side),Rigging Charge:$65

(Loc. Building 500 Wet Side),Rigging Charge:$65

with SEW-Eurodrive Type KAF77R37AM145 Gear Box, (Loc. Building 500 Dry Side),Rigging Charge:$100

304 Stainless Steel Construction with (32) 96"L Trays, 3 HP Turbo Fan Motor Drive, 1 HP Tray Motor Drive, Model SRF-224 Wyssmont Rotoscoop Feeder,...

304 Stainless Steel Construction with (32) 96"L Trays, 3 HP Turbo Fan Motor Drive, 1 HP Tray Motor Drive, Model SRF-224 Wyssmont Rotoscoop Feeder,...

11" x 9" Hopper Opening, 12-3/4" x 6" Discharge Opening, 300-400 RPM Range, 230/460V, 3PH, (Loc. Building 500 Dry Side),Rigging Charge:$200

Nominally Rated 15 Drums/Hour, 100 LB. Capacity, 22.5" Diameter x 33" High Drum Size, Control Panel with PanelView 300 Micro Module & Hardy Instru...

Nominally Rated 15 Drums/Hour, 100 LB. Capacity, 22.5" Diameter x 33" High Drum Size, Control Panel with PanelView 300 Micro Module & Hardy Instru...

(Loc. Building 500 Dry Side),Rigging Charge:$50

150 Class, CF8M Body, 316 Ball, 316LAP Seat, with Emerson Process Management Field Type QS1600.U03STACW Actuator, (Loc. Building 500 Dry Side),Rig...

150 Class, CF8M Body, 316 Ball, 316LAP Seat, with Emerson Process Management Field Type QS1600.U03STACW Actuator, (Loc. Building 500 Dry Side),Rig...

Special Class 300 Rating, 316 Body, 316Ti Trim, 1125 PSIG Shell Test, 75 PSIG/850 Degree F PS/TS Max, 68 Degree F/1000 Degree F TS Min/Max, 75 PSI...

F316L Bodies, INC625 Bellows, (Loc. Building 500 Dry Side),Rigging Charge:$100

F316L Bodies, INC625 Bellows, (Loc. Building 500 Dry Side),Rigging Charge:$100

(Loc. Building 500 Shipping Docks),Rigging Charge:$250

600 LB. Capacity, (Loc. Building 500 Dry Side),Rigging Charge:$50

Model CE-210-A-14ZB3, 195 ton, 210 hp, R-22 refrigerant, serial# 097777, built 2009 (Loc. Building 500) (3526-17),Rigging Charge:$2400

1,890 Lbs./Hr. Feed Rate, 2 RPM Shell Rotation at 1750 RPM Motor Speeds, 316L Tube with 66" Diameter x 81' Overall Length, with 63'-6"' Long Cente...

1,890 Lbs./Hr. Feed Rate, 2 RPM Shell Rotation at 1750 RPM Motor Speeds, 316L Tube with 66" Diameter x 81' Overall Length, with 63'-6"' Long Cente...

Inconel 600 Tube, with 96" Diameter x 66'-6" Overall Length with 53'-4" Long Center Section, 6'-7" Long Tapered to 48" Diameter Feed & Discharge S...

1800 Gallon Capacity, Electrically Heated with (3)150 kw Zones, Approx. 104" Inner Diameter x 141" Deep Furnace Section, Vertical Design, Job# 281...

(Loc. Building 400),Rigging Charge:$9000

(Loc. Building 400),Rigging Charge:$9000

316H stainless steel construction, Approx. 66" Diameter x 57'3" Straight Side, Dish Top & Bottom, Dual Rated 3 PSI and -15 Vacuum at 1000 F/ 3 PSI...

29 RF2 Design, 1100 Degree F Max Temp, 1778 RPM, 100 HP, 460V, 3PH, (Loc. Building 400 Quench Tower),Rigging Charge:$4000

with New York Blower 30,504 CFM Blower, 27 ACF Wheel Size, 2329 RPM, 75 HP, 460V, 3PH, Built 2010, (Loc. Outside Building 400 Quench Tower),Riggin...

3 HP, 460V, 3PH, S/N 10394732-3-1, with Magnatex Model MPL42-V25N-180TC-Z 316 S/S Centrifugal Pump, Size 1.5X1X8, 3 HP, 1800 RPM, & Oil Air Separa...

Lot 1545

S/S PSV KO Pot

Approx. 300 Gallon Capacity, Certified by Addison Fabricators, 14.7 PSIG at 1000 Degrees F MAWP, -20 Degrees F at 14.7 PSIG MDMT, Equipment No. V-...

Approx. 4000 Gallon Capacity, Certified by Addison Fabricators, 25/FV PSIG at 1200 Degrees F MAWP, -50 Degrees F at 25 PSIG MDMT, Equipment No. V-...

Approx. 195" Long x 113" Wide x 114" Platform Height, (Loc. Building 400 Room 430),Rigging Charge:$8000 -Mezzanine Only Tank sold previous lot.

75 HP, R-22 Refrigerant, S/N 097778, Built 2009, (Loc. Outside Building 400) (3526-18),Rigging Charge:$2000

Lot 1553

Dump/Vent Tank

14.9 PSI at 600 Degree F MAWP, -20 Degree F at 14.9 PSI MDMT, Certified by Modern Welding Company of Iowa, Equipment No. V-C-4222, S/N 4486, Built...

150 PSI at 450 Degrees F MAWP, -20 Degrees F at 150 PSI MDMT, Built 2009, (Loc. Building 400),Rigging Charge:$850

130A, 460-600V, 3PH, (Loc. Building 400 MCC-420),Rigging Charge:$

304 stainless steel construction, Approximately 12' Diameter x 27'-6" Straight Side, Semi Elliptical Dish Ends, on Saddles, 75 PSI at 400 F MAWP,-...

(Loc. Building 300),Rigging Charge:$175

Loading...Loading...
  • Lots per page
  • 60
  • 120
  • 240
Page of 2

Recently Viewed Lots