Filtered by:
- Category
- List
- Grid
-
29 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
2.5" Sterling extruder, 24:1 L/D, electrically heated, air cooled, with 40 HP DC motor with SCR controller, 3.95:1 gearbox ratio, 100 RPM output s...
Killion lab multi-filament extrusion system with One(1) 1" Killion extruder, 24:1 L/D, electrically heated, air cooled, jacketed feed section, 3 H...
8" Hartig Extruder, electrically heated, air cooled barrel, 40:1 L/D, vented barrel, 700 HP DC
8" Hartig Extruder, electrically heated, air cooled barrel, 40:1 L/D, vented barrel, 700 HP DC motor through Lufkin gearbox, 11:56:1 ratio, appro...
60mm Plastex Single Screw Extruder, Type EX60, 24:1 L/D, electrically heated, air cooled, jacketed feed section, 29 KW DC motor, 13.6:1 gear box r...
3/4" extruder, 18" barrel, 24:1 L/D, (3) heating zones and (1) die zone, electricall heated, air cooled, driven by 1.5 hp motor, with motor and te...
Leistritz twin screw extruder, model LSM 30.34, 34mm screws, counter rotating, electrically heated, air cooled, jacketed feed section, 38" long b...
2.5" Welex Extruder, 24:1 L/D, electrically heated, air cooled, jacketed feed section, 9:38:1 gear box ratio, 100 H.P. gear box rating with 40 H.P...
Leistritz twin screw extruder, model LSM 30.34, 34mm screws, 25:1 L/D, counter rotating, electrically heated, air cooled barrel, jacketed feed se...
2.5" HPM Extruder, 24:1 L/D, electrically heated, air cooled, 30 HP dc motor with scr controller, control panel with 3 barrel and 1 die zone, top ...
Davis-Standard Gemini conical twin screw extruder, model GC8HD, 130/61 mm conical screws, counter rotating, electrically heated, air cooled barrel...
8" diameter Egan Extruder model 8035 D-H, 32:1 L/D ratio, vented barrel, electrically heated, water cooled, 11.73:1 gearbox ratio, 600 HP DC driv...
Welding Engineers model HT 0.8 counter rotating twin screw extruder, 500 rpm, 10 HP, serial# 2741, year 1993.***Loading Fee $250.00*** ...[more]
6" GEC BLOWN FILM DIE
GEC blown film die, 6" diamter, rotating capability with 1/6 hp, 230/460 volt motor drive, heater bands, air ring on cart.***Loading Fee $100.00*...
6" Sterling extruder, 32:1 L/D, electrically heated, water cooled barrel with circulation system, jacketed feed section, 68" center line height, 4...
Sterling extruder, 3.5" diameter screw, 30:1 L/D, 100 HP motor, 13.95:1 gearbox ratio, Sterling serial# 35906 with Kreyenborg hydraulic screen cha...
Davis-Standard Mark V extruder, model 3.5 MV350, 100mm diameter 26:1 barrel, no screw, electrically heated, air cooled, five barrel zones, four d...
2.5" Davis-Standard Mark V Extruder, Model DS2.5MS, 24:1 L/D, electrically heated, air cooled, jacketed feed section, 17.4:1 gearbox ratio, 40 HP ...
6" Sterling extruder, 32:1 L/D, electrically heated, water cooled barrel with circulation system, jacketed feed section, 68" center line height, 4...
6" APV Sterling Davis-Standard extruder, 32:1 L/D, electrically heated, water cooled barrel with circulation system, jacketed feed section, 68" ce...
Davis-Standard Thermatic extruder, model 25IN25, 2.5" diameter screw, 30:1 L/D, 6 heating zones, 50 HP motor, 17.2:1 gearbox ratio, Davis Standard...
Davis-Standard Thermatic extruder, model 25IN25, 2.5" diameter screw, 30:1 L/D, 6 heating zones, 50 HP motor, 17.2:1 gearbox ratio, Davis Standar...
Davis-Standard Mark V extruder, model 35MV350, 100mm diameter, 26:1 L/D barrel, no screw, electrically heated, air cooled with five barrel zones a...
2" Killion single screw extruder, 24:1 L/D, electrically heated, air cooled barrel, jacketed feed throat, 25 hp dc motor with SCR, thru Koellmann ...
Davis-Standard Thermatic extruder, model 20IN20, 2" diameter screw, 30:1 L/D, 25 HP motor, 17.56:1 gearbox ratio, Davis Standard serial# U2544, wi...
2" Royal Extruder, 35:1 L/D, model 268, electrically heated, water cooled, 4 barrel zones, 6 die zones, with 30 hp motor with VFD controller, 460V...
Davis-Standard Mark V extruder, model MV-35INDS, 100MM diameter 26:1 L/D barrel, no screw, electrically heated air cooled with five barrel zones a...
2.5" Egan extruder, 24:1 l/d, electrically heated, water cooled barrel, closed loop water system with reservior, 50 hp dc motor, on board control ...
1.5" EXTRUDER, 30:1 L/D, 10HP AC
1.5" extruder, 30:1 L/D, Flender gearbox, electrically heated, air cooled barrel, no screw, four barrel zones, two die zones, 10 HP 575V AC 1745 ...
2.5" HPM Extruder, 30:1 L/D, electrically heated, water cooled, crammer feeder with variable speed drive, 220 RPM max. screw speed, vented, 40 H.P...
Loading...-
29 item(s)/page