VERNIER HEIGHT GAUGE, MITUTOYO 18"

PLA-CHEK GAUGE, CADILLAC MDL. 22341, S/N 16041

AUTO LEVEL, TOPCON MDL. AT-E7, w/tri-pod

LOT OF CARBIDE INSERTS, assorted (in two boxes under table)

VERNIER CALIPER, FOWLER 40"

{ Choice of lots: 64, 65 } VERNIER CALIPER, MITUTOYO 24"

{ Choice of lots: 64, 65 } VERNIER CALIPER, KANON 24"

LOT OF DIAL CALIPERS: (2) 12", 4", 6"

LOT OF VERNIER CALIPERS (2), 14"

LOT OF ABRASIVES, assorted

LOT OF MICROMETERS (9), assorted

HOLE MICROMETER, SPI, 1.4" to 1.6"

LOT OF DIAL GAUGES (8), assorted

LOT OF PRECISION LEVELS (3), assorted

LOT OF MACHINE SCRAPERS, assorted

{ Group of lots: 73, 74 } LOT OF DIAL BORE GAUGES (2), MITUTOYO, assorted

LOT OF DIAL BORE GAUGES (2), assorted

{ Group of lots: 74A, 75 } I.D. MICROMETER, MITUTOYO 12"

{ Group of lots: 74A, 75 } LOT OF DEPTH MICROMETERS (2)

{ Group of lots: 76, 77 } I.D. MICROMETER, STARRETT NO. 124-C

{ Group of lots: 76, 77 } LOT OF I.D. MICROMETERS (4), assorted

{ Group of lots: 78, 79 } LOT CONSISTING OF: (4) assorted dial indicators w/magnetic bases (on one shelf)

{ Group of lots: 78, 79 } LOT OF DIAL INDICATORS, assorted (on one shelf)

{ Group of lots: 80, 81, 82 } LOT OF MAGNETIC BASES, assorted (on one shelf)

{ Group of lots: 80, 81, 82 } LOT OF INSPECTION PIECES, assorted (on two shelves)

{ Group of lots: 80, 81, 82 } LOT OF I.D. DIAL THREAD GAUGES, ALLEN GAUGE TOOL

{ Group of lots: 83, 84, 85 } LOT OF DIAL INDICATORS, assorted

{ Group of lots: 83, 84, 85 } GAUGE BLOCK SET, STARRETT, Grade 2

{ Group of lots: 83, 84, 85 } GAUGE BLOCK SET, DOALL, A+ Grade

UNIVERSAL CYLINDRICAL GRINDER, CINCINNATI 10 X 24 MDL. 10X24U, variable spd. swivel workhead, internal grinding attach., 2 pt. steadyrests, spare ...

LOT OF GRINDING WHEELS, assorted

HYDRAULIC SURFACE GRINDER, THOMPSON 10” X 48” MDL. 3B, incremental downfeed, 10” x 36” electromagnetic chuck & control, S/N 565713 ...[more]

HYDRAULIC OPEN SIDE PLANER, ROCKFORD, 42” x 32” table, approx. 48” table stroke, approx. 36” ht. over table, sgl. ram head & side head, pendant co...

SENSITIVE RADIAL ARM DRILL, FOSDICK, 24” x 36” table w/geared tilt & pwr. elevation, spds: 30-1200 RPM, tapping cycle, S/N 18769 ...[more]

TILT FRAME VERTICAL BANDSAW, MARVEL SERIES 8 MARK III, new 2014, 18” x 22” cutting cap., +/- 60 deg. tilt, 1-1/4” blade, 50-450 SFPM, 5 HP, infeed...

TILT FRAME VERTICAL BANDSAW, MARVEL SERIES 8 MARK II, S/N 829688

TILT FRAME VERTICAL BANDSAW, MARVEL SERIES 8 MARK I, S/N 820075 (out of service)

HYDRAULIC PRESS, OILGEAR 90 T. CAP., hand lever control

PLAIN MECHANICAL SHAPER, STEPTOE 16”

PLAIN CYLINDRICAL GRINDER, LANDIS 16” X 60”, 36” x 4” wheel size

VERTICAL TURRET MILL, BRIDGEPORT SERIES II SPECIAL, 11” x 58” table, 6” riser block, 2 HP variable spd. head, spds: 60-4200 RPM, long. pwr. feed, ...

VERTICAL TURRET MILL, BRIDGEPORT SERIES I, 9” x 42” table, long. pwr. feed, chrome ways, Bridgeport shaping attach., S/N 170770

VERTICAL TURRET MILL, BRIDGEPORT SERIES I, 9” x 48” table, (2) long. pwr. feeds, Anilam Wizard 450 D.R.O., S/N 251084

VERTICAL TURRET MILL, BRIDGEPORT SERIES I, 9” x 42” table, long. pwr. feed, chrome ways, Bridgeport shaping attach., S/N 169067

PLAIN HORIZONTAL MILL, MILWAUKEE MDL. 2HL, 9” x 46” table, overarm suppt.

ENGINE LATHE, MONARCH 24” x 132” MDL. 810, 16” sw. over crosslide, (2) steadyrests, taper attach., 18” dia. 4-jaw chuck, 2-1/4” spdl. hole, spds: ...

GAP BED ENGINE LATHE, MAZAK 24” X 120”, 3.15” spdl. bore, front 15” dia. 3-jaw chuck, rear 12” dia. 4-jaw chuck, spds: 12-1200 RPM, inch/metric th...

ENGINE LATHE, MONARCH 18” X 54” MDL. 16CW, spds: 17-700 RPM, taper attach., steadyrest, 10” dia. 3-jaw chuck, S/N 27794

CNC HORIZONTAL BORING MILL, NOMURA MDL. HBA-110T-R3, new 2012, 115 hrs. total run time, Fanuc Series 31i-B5 CNC control, 55” x 63” rotary table, 1...

LOT OF CAST IRON ANGLE PLATES (1 PAIR), NOMURA, 60” x 24” x 26”, T-slotted, 2-piece design

{ Group of lots: 105A, 105B } LOT OF CAST IRON ANGLE PLATES (2), 24" x 12" x 12"

{ Group of lots: 105A, 105B } LOT OF CAST IRON ANGLE PLATES, 12” x 12” x 12”, smooth finish

ROLLER DRAWER TOOL CABINET, w/CAT-50 taper toolholders, large qty. of spring collets

CNC LATHE, DOOSAN PUMA MDL. 400LMB, new 5/2006, 251 hrs. total run time, Fanuc 21i-TB CNC control, 30.31” swing over bed, 23.22” swing over saddle...

CNC LATHE, MORI SEIKI MDL. SL25-B500, 3,604 hrs. total run time, Fanuc MFT6 CNC control, 20.5” swing over bed, 13.8” swing over cross slide, 13.4”...

CNC VERTICAL MACHINING CENTER, MORI SEIKI MDL. NV5000-2B/40, new 10/2010, 2,180 hrs. total run time, Mori Seiki MSX-511IV CNC control, 51.97” x 23...

CNC ROTARY TABLE, TSUDAKOMA MDL. RNA-320R, 12" dia. 3-jaw chuck, tailstock, S/N 101076

CNC VERTICAL MACHINING CENTER, MORI SEIKI MDL. NV5000-1A/40, new 4/2004, 5,220 total run time, Mori Seiki MSX-501 CNC control, 43.31” x 23.62” tab...

ROTARY TABLE, KITAGAWA MDL. MR2000RAE04, 8" dia. 3-jaw chuck, tailstock, S/N 030083

CNC VERTICAL MACHINING CENTER, OKUMA HOWA MILLAC MDL. 511V, Fanuc 18M CNC control, 20” x 50” table, 2,000 lb. load cap., 39.37” X-axis travel, 20”...