Machinery from the U.S.S. Shenandoah Auction Date: December 6, 2017 at 10 am CSTViewing Date: December 5, 2017 at 9 am - 4 pm CST More details com...

{ Choice of lots: 1, 2 } } } } BENCH TYPE DRILL PRESS, ROCKWELL MDL. N15-080, (4) spdl. spds: 470, 780, 1300 & 1950 RPM, ½ HP motor, 115 v., sgl....

{ Choice of lots: 1, 2 } } } } FLOOR TYPE DRILL PRESS, JET 15” MDL. J-A5818, new 2010, 15” x 18” table, variable spd., ½” drilling cap in mild st...

RADIAL DRILL PRESS, ROCKWELL, S/N 1784088

DRILL PRESS, ROCKWELL MDL. 20, S/N 1784086

BENCH GRINDER, SETCO, 3,600 RPM, S/N 112056

ARBOR PRESS, DAKE 3 T. CAP. MDL. 1-1/2B1, 48:1 leverage ratio, 1-1/4” x 1-1/4” x 24-1/2” ram size, 14” max. work dia., 7” throat, 2” largest arbor...

SWIVEL TABLE, H.D., w/(2) table mtd. vises

DYNAMOMETER, DILLON 2,000 LB. CAP., 10” dial, 10-lb. division, +/- 0.5% of cap. accuracy, zero control up to 20% of cap., NIST calibration, mtd. o...

HYDRAULIC H-FRAME PRESS, DAKE 25 T. CAP. MDL. 7-044, manual operation, 33-1/2” dist. btn. uprights, 5-3/16” dist. btn. channels, 4” to 39” ram to ...

WHEEL PRESS, WILSON MDL. 150T, 150 TON CAPACITY, 20" CYLINDER STROKE, MAX. DISTANCE FROM FACE TO RESISTANCE BLOCK 148", RESISTANCE BLOCK THROUGH H...

HARDNESS TESTER, DETROIT MDL. PH-2, Iron Horse general purpose industrial motor, 1/3 HP, 1,725 RPM, 60 Hz, sgl. phase, 115 v./230 v., on casters, ...

METAL DISINTEGRATOR, CAMMANN MDL. C-96, 25.5” x 47” table, 34.5” table height, 41” column height from table, 21.5” vert. head travel on column, 42...

{ Choice of lots: 11, 11A } } } } HYDRAULIC ROTARY TUBE BENDER, STRIPPIT MDL. 150, 16 ga. x 1-1/4” O.D. steel tubing, 1” rd. steel bar, ¾” sq. st...

{ Choice of lots: 11, 11A } } } } PIPE BENDER, COAST MDL. 3RD, 3” IPS Schedule 80 carbon steel pipe bending cap., 0 to 210 deg. bend angle indica...

PAPER SHEAR, CHALLENGE MDL. HBE, Size 265

{ Group of lots: 13, 14 } } } } PAPER DRILL, CHALLENGE MDL. JF, S/N 54305

{ Group of lots: 13, 14 } } } } WIRE STITCHER, BOSTITCH BRONCO MDL. 74W

TURRET DRILL, BURGMASTER 6-STATION, 19” x 26” table, 6 pos., spindles 1 & 4”: 500-1500 RPM (l) & 1000-3000 RPM (h), spindles 3/4 2 & 5: 350-1000 R...

HORIZONTAL HONE, SUPERIOR MDL. SS2, spds: 200-1750 RPM, grinding stone pressure control, expansion setting control, coolant, foot pedal actuator, ...

HARD BEARING BALANCING MACHINE, HOFFMAN MDL. HL-16.1, 5-lb. to 180-lb. cap., 18” max. dia., 36” max. dist. btn. stands, 1 HP DC motor, belt driven...

HARD BEARING BALANCING MACHINE, SCHNEK MDL. H40B/3, 48” max. dia., 60” max. dist. btn. stands, 50” suppt. bearings dia., 7-1/5 HP motor, no contro...

{ Choice of lots: 19 } } } } ABRASIVE CUT-OFF SAW, EVERETT MDL. 14-16 CIRCULAR TYPE, 2” solids & most 5” shaped, 14” or 16” cutting wheel dia., ...

ABRASIVE CUT-OFF SAW, EVERETT MDL. 14-16 CIRCULAR TYPE, 2” solids & most 5” shaped, 14” or 16” cutting wheel dia., 1” arbor shaft, 7-1/2 HP motor...

{ Choice of lots: 21 } } } } CHOP SAW, EVERETT MDL. 10, 230 v. to 460 v., 3 HP motor, 3,450 RPM, S/N 04-1344

{ Choice of lots: 22 } } } } CHOP SAW, LEESON MDL. N60345B39G, 3 HP motor, 115 v. to 230 v., Cat. No. 1131610.00, S/N N.A.

CHOP SAW, EVERETT MDL. 10, 115 v. to 230 v., 2 HP motor, 2,300 RPM, S/N 07-1823

CARBIDE TOOL GRINDER, SETCO MDL. SPL814-110-8, twin tilting tables, 10” x 2” grinding wheel, 1-1/2 HP grinding wheel motor, 460 v., 3 phase, 60 Hz...

CARBIDE TOOL GRINDER, HAMMOND MDL. CBW-6, 6” grinding wheel dia., 1 HP motor, 460 v., 3 phase, 60 Hz, S/N 2118

DRILL GRINDER, OLIVER MDL. 600, ½” to 3” cap., 28” max. drill length, 9” x 2” x 5” grinding wheel, 2,200 RPM, 2 HP motor, will grind 2, 3 or 4 flu...

{ Choice of lots: 27 } } } } DOUBLE END PEDESTAL GRINDER, SETCO MDL. SPL606-292-8, combination wet/dry type, integral dust collection system, 1-1...

DOUBLE END PEDESTAL GRINDER, SETCO MDL. SPL606-292-8, combination wet/dry type, integral dust collection system, 1-1/4” arbor, 1,800 RPM spdl. spd...

{ Choice of lots: 29, 30 } } } } DOUBLE END PEDESTAL GRINDER, SETCO MDL. SPL606-292-8, combination wet/dry type, integral dust collection system,...

{ Choice of lots: 29, 30 } } } } DOUBLE END PEDESTAL GRINDER, SETCO MDL. SPL606-292-8, combination wet/dry type, integral dust collection system,...

{ Choice of lots: 31 } } } } DOUBLE END PEDESTAL GRINDER, SETCO MDL. SPL606-292-8, combination wet/dry type, integral dust collection system, 1-1...

DOUBLE END PEDESTAL GRINDER, SETCO MDL. SPL602-211-8, dbl. grinder w/integral dust collection system, 12" dia. x 2" face grinding wheel, 1-1/4" ar...

DOUBLE END PEDESTAL GRINDER, BALDOR MDL. 1215W, 2 HP motor, 220 v./440 v., 3 phase, 60 Hz, S/N 873

BENCH GRINDER, SETCO MDL. SPL, 10” max. wheel size, 1,800 RPM, S/N 112021

BLAST CABINET, 36" x 48", 150 PSI max. pressure, S/N N.A.

UNIVERSAL DRY BLAST CABINET, TRINCO MDL. 40X40SL/BP, 85 PSI operating pressure, 40" x 40" x 31" ht. interior dims., 40" x 40" flip top door openin...

UNIVERSAL BLAST CABINET, S/N N.A.

HOSE CUT-OFF & SKIVE MACHINE, AEROQUIP MDL. S1102, -4 to -32 cap., S/N N.A.

DOG-LEG HOSE ASSEMBLY MACHINE, AEROQUIP MDL. A, new 1985, 4” to 48” cap., large qty. of tooling & adj. heads, S/N 85-05 ...[more]

AIR ACTUATED COIL CUTTER, POTTER, RAYFIELD MDL. E-5127, on stand, S/N E-5127

{ Choice of lots: 41, 42 } } } } ELECTRIC INCINERATOR BURN-OFF OVEN, DESPATCH ELECTRIC HEATER TYPE, 2-doors, 36 deg. to 850 deg. F. max. temp, 22...

{ Choice of lots: 41, 42 } } } } ELECTRIC BAKE OVEN, DESPATCH, 650 deg. F. max. temp., 48” x 48” x 60” ht. chamber (80 cu. ft.), 440 line voltage...

ELECTRIC HORIZONTAL AIR FLOW CABINET OVEN, GRIEVE MDL. HA-850, 850 deg. F. max. temp., +/- 0.3% accuracy, +/- 7 deg. F. oven uniformity, 10 kW/75,...

ELECTRIC FURNACE, LINDBERG MDL. RO-101810, 2,000 deg. F. max. temp., 10 kW, heavy duty Mdl. 31F elec. heat source, S/N D80123, 12 KVA for 180 min....

{ Group of lots: 44, 45 } } } } COIL CUTTER & PULLER, THUMM MDL. A3

{ Group of lots: 44, 45 } } } } COIL WINDER, POTTER RAYFIELD MDL. E170WV-MS, new 1991, dual spdl. w/selector, variable spds., forward/reverse con...

ARMATURE STAND, SAS

WASH TANK, MAGNUS MDL. ALHS, AJA-LIF H.D. TYPE, 32” x 60” x 40” ht. interior dims., 1,000 lbs. load cap., 480 v./3 phase/36 kW electric heat, pwr....

INDUSTRIAL VACUUM CLEANER, SPENCER, 5 HP motor, 3,500 RPM, S/N 304867

RECIRCULATING VARNISH DIP TANK, MDL. VK51-C, 34” x 34” x 40” ht., 1 HP motor, S/N 981140

TILT FRAME VERTICAL BANDSAW, MARVEL 8 MARK II, 18” x 22” @ 90 deg., 18” x 12.75” @ 45 deg., spds: 5-450 FPM, 5 HP motor, 174” x 0.035” x 1” blade,...

VERTICAL BANDSAW, DOALL MDL. 3613-1, 36” x 13” rect. cap., 13” rd. cap., (2) blade spds: 55-5200 RPM, 3 HP motor, 35-1/2” throat, 13” under guide,...

VERTICAL BANDSAW, DOALL MDL. 3612-2H3, 35-1/2” throat depth, 12” under guide, 24” x 30” (2 T-slots) hyd. feed table, fds: 0-6 FPM, 12” table strok...

HORIZONTAL BANDSAW, W.F. WELLS MDL. L-10, 10” x 16” rect. @ 90 deg., 11” rd. @ 90 deg., 10” x 8” rect. @ 45 deg., 7-3/4” rd. @ 45 deg., 2,000 lb. ...

HYDRAULIC PRESSBRAKE, PACIFIC 300 T. CAP. MDL. K300-10, 10’ x 3/8” cap., bending capacities: 3/8” x 10’ carbon steel, ¼” x 10’ stainless steel, ½”...

LOT OF PRESSBRAKE TOOLING; (1) 120" X 7", (1) 96" X 5", (1) 28" X 5", (1) 48" x 7" ...[more]