GRANITE SURFACE PLATE, 24” x 36” x 4” thk., on fabricated steel stand

LOT OF BLOCKS: 1-2-3 & V

LOT OF PRECISION VISES

LOT OF ALUMINUM VISES

LOT OF V-BLOCKS (in wooden box)

LOT OF I.D. MICROMETERS, interchangeable rod type

HAND-HELD REFRACTOMETER

LOT OF PRECISION PROTRACTORS

TORQ-METER, SNAP-ON 50 LB. CAP.

LOT OF GAUGES, misc.

DEMAGNETIZER, PHASE II

ELECTRONIC SAFE CABINET

LOT OF PRECISION GROUND V-BLOCKS

LOT CONSISTING OF: desk, file cabinet, water dispenser

OPTICAL COMPARATOR, S.T. INDUSTRIES 30”, surface illumination, 20X lens, 8” x 35” pwr. stage, 2-axis D.R.O., S/N N.A.

{ Option of lots: 174A } } SELF-DUMPING CHIP HOPPER, HIPPO HOPPER, ½ cu. yd.

{ Option of lots: 174B } } SELF-DUMPING CHIP HOPPER, HIPPO HOPPER, ½ cu. yd.

{ Option of lots: 174C, 174D } } SELF-DUMPING CHIP HOPPER, HIPPO HOPPER, ½ cu. yd.

{ Option of lots: 174C, 174D } } SELF-DUMPING CHIP HOPPER, HIPPO HOPPER, ½ cu. yd.

SELF-DUMPING CHIP HOPPER, HIPPO HOPPER, ½ cu. yd.

LOT CONSISTING OF SHIPPING & RECEIVING SUPPLIES: boxes, plastic bags, butcher paper, etc.

REFRIGERATOR, WHIRLPOOL (delayed removal until 08-24-17)

4-AXIS VERTICAL MACHINING CENTER, HAAS MDL. VF-3, new 1/2012, 18” x 48” table, 3,500 lb. table load, 40” X, 20” Y & 25” Z-axis travels, CAT-40 tap...

ROTARY TABLE, HAAS MDL. HRT300, Adjust-Tru 10” dia. 6-jaw chuck, S/N NA

4-AXIS VERTICAL MACHINING CENTER, HAAS MDL. VF-3B, new 1/2007, 18” x 48” table, 40” X, 20” Y & 25” Z-axis travels, external cartridge filter, CAT-...

CNC ROTARY TABLE, HAAS MDL. HRT210, Adjust-Tru 8” dia. 6-jaw chuck, S/N NA

ANGLE LOCK MILLING VISE, KURT 8”, swivel base

{ Choice of lots: 182, 184 } } ANGLE LOCK MILLING VISE, KURT 6"

{ Choice of lots: 183 } } ANGLE LOCK MILLING VISE, KURT 6"

{ Choice of lots: 182, 184 } } ANGLE LOCK MILLING VISE, KURT 6"

ANGLE LOCK MILLING VISE, KURT 6"

ANGLE LOCK MILLING VISE, BENATO 6"

TILTING MACHINE VISE, 6"

TILTING MACHINE VISE, 4"

{ Group of lots: 189, 190 } } ANGLE MILLING VISE, DAYTON 4", 3-way

{ Group of lots: 189, 190 } } TILTING MILLING VISE, 4"

{ Group of lots: 191, 192 } } MILLING VISE, 6"

{ Group of lots: 191, 192 } } LOT OF VISES: tilting & angle

VERTICAL/HORIZONTAL ROTARY TABLE, PHASE II 12"

{ Choice of lots: 193, 194 } } VERTICAL/HORIZONTAL ROTARY TABLE, VERTEX 8” ,w/3-jaw chuck

{ Choice of lots: 193, 194 } } VERTICAL/HORIZONTAL ROTARY TABLE, YUASA 8”. w/3-jaw chuck

INDEXER, L&W "SUPER SPACER” 8", w/3-jaw chuck

INDEXER, VERTEX 4”,w/3-jaw chuck

TURN-ON TABLE, MMS

{ Choice of lots: 197A, 197B } } AIR TURBINE SPINDLE, CAT-40

{ Choice of lots: 197A, 197B } } AIR TURBINE SPINDLE, CAT-40

MODULAR FIXTURE (small)

CNC LATHE, HYUNDAI WIA MDL. L400C, new 2014, Fanuc Series 32i - Mdl. A CNC control, 30.7” sw. over bed, 24.8” max. turning dia., 46.1” max. turnin...

CNC LATHE, HAAS MDL. ST-30, new 2012, 31.5” sw. over front apron, 20.75” sw. over crosslide, 30” btn. centers, 3.5” spdl. bore, 3,400 RPM, 30 HP, ...

CNC LATHE, HAAS MDL. SL-30T, new 1/2007, 30” sw. over bed, 17” max. turning dia., 39” btn. centers, 3.5” spdl. bore, 3,400 RPM, 30 HP, 10” hyd. ch...

CNC LATHE, DOOSAN PUMA MDL. 240, new 3/2007, Fanuc Series 21i-TB CNC control, 21.65” sw. over bed, 15.35” sw. over saddle, 13.77” max. turning dia...

FREE STANDING JIB CRANE, ABELL-HOWE 1/4 T. CAP., 1 T. cap. pneu. hoist

PORTABLE C-FRAME CRANE, 500 LB. CAP. MDL. NTHN-501-703F, 300 lb. cap. air hoist, wide carriage

HYDRAULIC H-FRAME ARBOR PRESS, DAKE MDL. 50H, 33” dist. btn. uprights, adj. height bed, hand pump head w/adj. center, roller cart mtd., Dake Mdl. ...

LOT OF TOOLHOLDERS, HAAS

{ Choice of lots: 206, 207 } } LOT OF TOOLHOLDERS, DORIAN

{ Choice of lots: 206, 207 } } LOT OF TOOLHOLDERS, DORIAN

LOT OF TOOLHOLDERS, HAAS

{ Choice of lots: 209 } } LOT OF TOOLHOLDERS, DORIAN

LOT OF TOOLHOLDERS