PLAIN HORIZONTAL MILL, MILWAUKEE MDL. 2H, 10" x 48" table, spds: 35-1400 RPM, #50 NST spdl. taper, S/N 19-3301

RADIAL ARM DRILL, BALL-CHICAGO 4' X 9" MDL. R1200L, spds: 40-2000 RPM, plain box table, S/N N.A.

CABINET, steel fabricated, w/contents

VERTICAL BORING MILL, NILES, 60" dia. table, approx. 64" swing, (2) swivel head rails, approx. 48" ht. under rail, 20 HP drive motor, plain table ...

VERTICAL TURRET LATHE, BULLARD 34", approx. 24" ht. under rail, side head, spiral drive, sgl. motor drive, 30 HP motor, 3-jaw built-in chuck w/4-j...

VERTICAL TURRET LATHE, BULLARD 54", 50" built-in 4-jaw chuck, approx. 42" under cross rail, 5 pos. turret, side head, spiral drive, 3-motor drive ...

HORIZONTAL JIG MILL, DEVLIEG MDL. 3B, spds: 23-1200 RPM, 3-axis D.R.O., 48" x 30" table, S/N 5-167

STEEL TABLE, w/DeVlieg tooling

VERTICAL TURRET MILL, INDEX MDL. 845, 9" x 46" table, 2 Hp milling head motor, S/N 12990

VERTICAL TURRET MILL, BRIDGEPORT MDL. J, 9" x 42" table, belt driven head, spds: 80-2720 RPM, 2 HP milling head motor, S/N 84215

LOT OF VERTICAL MILL TOOLING, misc.

VERTICAL TURRET MILL, BIRMINGHAM, 10" x 48" table, long. pwr. feed, hardened & ground ways, variable spds: 70-4200 RPM, 3 HP motor, 2-axis D.R.O.,...

VERTICAL MILL, BRIDGEPORT SERIES II, 11" x 58" table, 3-axis D.R.O., variable pwr. quill feed, 4 HP drive motor, spds: 50-3500 RPM, S/N 294

SEMI-AUTOMATIC HORIZONTAL BANDSAW, KASTO, 18" rd. cap., 18" x 18" rect. cap., hyd. clamping, pwr. table feed

{ Group of lots: 71, 72 } BRIDGE CRANE, 3 T. X 30' SPAN, top running, underhung hoist, 6-way pwr. motions, wire rope hoist, pendant control

{ Group of lots: 71, 72 } LOT OF LINEAR CRANE RAILS, approx. 125'L., for above listed bridge crane (vertical support columns not included)

TABLE TYPE HORIZONTAL BORING MILL, LUCAS 4" MDL. 42B60, outboard suppt., S/N 42B1310 (currently disassembled & in need of repair)

PLANER MILL, CINCINNATI HYPRO, Futurmill 30 HP milling head, #50 NST taper, 10" quill, manual quill travel, spds: 53-900 RPM, 5' x 20' table, 72" ...

CABINET, steel fabricated, w/Futurmill tooling

TABLE TYPE HORIZONTAL BORING MILL, SACEM, 4-3/8" spdl., spds: 12-1260 RPM, #50 NST spdl. taper, pwr. drawbar, pendant control, 49-1/2" x 55" table...

VERTICAL MILL, CINCINNATI NO. 5, dual pwr., wide knee, 14" x 100" table, 50 HP motor, spds: 15-1500 RPM, pwr. down feed, turret stop, S/N 3J5B5H-6

TABLE TYPE HORIZONTAL BORING MILL, LUCAS 4", spds: 9-1200 RPM, 40" x 86" table, Sony 2-axis D.R.O., tooling, S/N 42B0111

CNC LATHE, MORI SEIKI MDL. SL-4A, Fanuc 6TB CNC control, 10" dia. 3-jaw chuck, 10 pos. turret, S/N 905

GAP BED ENGINE LATHE, TARNOW, 21" sw. over bed, 60" dist. btn. centers, 30" sw. in gap, spdl. spds: 35.5-1800 RPM, 2-1/2" spdl. hole, steadyrest, ...

ENGINE LATHE, SOUTHBEND TURN-NADO 17" X 108", spds: 30-1580 RPM, taper attach., steadyrest, S/N 70GJ2045

ENGINE LATHE, AMERICAN PACEMAKER 24" X 84", taper attach., spds: 20-1200 RPM, steadyrest, 18" dia. 4-jaw chuck, S/N 64056

ENGINE LATHE, LODGE & SHIPLEY POWERTURN MDL. 2516/27, 32" sw. over carriage, 27-1/2" sw. over crosslide, 192" dist. btn. centers, spds: 9-500 RPM,...

HEAVY DUTY GAP BED ENGINE LATHE, VDF WOHLENBERG, spds: 3-375 RPM, 43" dia. 4-jaw chuck,66" sw. in gap, 3" hole thru spdl., steadyrest, approx. 27'...

{ Group of lots: 84A, 85 } BRIDGE CRANE, 5 T. X 51' SPAN, top running, dbl. girder, pendant control

{ Group of lots: 84A, 85 } LOT OF BRIDGE CRANE RAILS, approx. 125'L., bolted construction (vertical support columns not included)

{ Group of lots: 85A, 86 } ELECTRICAL SWITCHGEAR, FEDERAL PACIFIC, 600 amps main, 15 KV, 500 KVA

{ Group of lots: 85A, 86 } RECTIFIER, AMERICAN MDL. SIFDBP230218E/RC, 440 v. input, 75 amps, 3 phase, 60 cycle, 230 v. output, 218 amps

VERTICAL BORING MILL, BETTS 100", rebuilt & remfg. in 1971, 108" sw. to column, variable spds: 1.3-45 RPM, SCR drive, plain table w/(4) top jaws, ...

ELECTRICAL SWITCHGEAR, FEDERAL PACIFIC, 400 amps, 480 V., 3 phase, 60 Hz

HYDRAULIC KEYSEATER, MITTS & MERRILL MDL. 6-TT, 30" max. length, 3-1/2" max. width, 6" dia. mandrel, wide assortment of keyseat cutters & accessor...

TRANSFORMER BANK, GENERAL ELECTRIC, rebuilt by Sunbelt Transformer Inc., 2,000 KVA, 13/8 Delta input, 480/277 Y output, mineral oil filled, weighs...

ABRASIVE CUT-OFF SAW, EVERETT, approx. 18' blade, 7-1/2 HP motor, fabricated steel base, built-in vacuum

HYDRAULIC IRONWORKER, METAL MUNCHER 49 T. CAP. MDL. MM61E, 13/16" thru 3/4" punch cap., flatbar shear, 1-1/4" sq. shear, 4" x 4" x 3/8" angle shea...

CNC OXY/FUEL SHAPE CUTTER, MESSER 12' X 30' MDL. ICD-MATE, new 2006, Burny Phantom CNC control, oxy/fuel cutting head w/Mdl. OL-1 motorized torch ...

RADIAL ARM DRILL, CINCINNATI BICKFORD 7' X 19", spds: 15-972 RPM, tilting box table, S/N 6E-367

TILT FRAME VERTICAL BANDSAW, HYD-MECH MDL. V18, 18" x 20" cap., hyd. vises, pwr. tilt, S/N J06930T1

FLOOR TYPE HORIZONTAL MILL, GIDDINGS & LEWIS MDL. 350F, 5" main spdl., 2-1/2" aux. spdl., main spdl. spds: 6.25-375 RPM, aux. spdl. spds: 25-1500 ...

{ Group of lots: 95, 96, 97 } BRIDGE CRANE, 5 T. X 50' SPAN, top running, sgl. girder, pendant control

{ Group of lots: 95, 96, 97 } BRIDGE CRANE, 20 T. X 51' SPAN, top running, dbl. girder, (1) 20 T. & (1) 10 T. cap. hoists, pendant control

{ Group of lots: 95, 96, 97 } BRIDGE CRANE LINEAR RAIL, approx. 120'L., bolted construction (vertical support columns not included)

LOT CONSISTING OF: Dura Chrome, FG20-MAG-CR-Brick, 13-1/2" x 3" (on two pallets)

LOT CONSISTING OF: ANH refractories, Kurzite Company, 9X4.5-4.188x3-2.75 x 3-25, Arch-Key-Wedge (approx. 8 pallets - 412 pcs. per pallet)

{ Group of lots: 100, 101 } LOT CONSISTING OF: Wedron Sand 730 (approx. 1-1/2 pallets - (64) bags/pallet, 50 lb. bags)

{ Group of lots: 100, 101 } PORTABLE CEMENT MIXER

LOT OF PALLET RACK SECTIONS (14), assorted (located under foundry shed)

LOT CONSISTING OF: Unifrax I LLC Fiber Fray (one pallet)

HIGH VOLUME REFRACTORY MIXING SYSTEM, consisting of: (9) mixing tanks, vert. air receiver, Nash vacuum pump, receivers & controls for mixing raw r...

{ Group of lots: 104A, 105 } REFRACTORY GUN SYSTEM, C.E. REFRACTORIES, sand tank, metering hopper, hose on portable transport cart

{ Group of lots: 104A, 105 } LOT OF PORTABLE CARTS (3), steel fabricated, 80"W. x 45" dp. x 68" ht.

VIBRATORY SHAKE-OUT DECK, 13'L. x 54"W., 25 HP motor, (2) inclined belt trough discharge conveyors, approx. (1) 3'W x 20'L. & (1) 28"W. x 8'L., in...

SAND TOWER, STATES, rotary bottom feeder, 12' dia, est. 28"W.x 40'L. inclined belt trough conveyor

BATCH SAND MULLER, SIMPSON MDL. 2G, 2,500 lb. batch cap., 80" crib dia., 50 HP drive, controls

SAND MULLER, 40 HP motor (for parts use only)

{ Group of lots: 110, 111 } LOT CONSISTING OF: #200 Volclay (partial pallet - 100 lb. sacks)

{ Group of lots: 110, 111 } INCLINED BELT/TROUGH CONVEYOR, est. 28"W. x 50'L.