{ Choice of lots: 61, 62 } CNC HORIZONTAL MILLING MACHINE, CINCINNATI 30" MDL. CIM-X, Fanuc 6M CNC control, #50 taper milling spdl., King tool ret...

{ Choice of lots: 61, 62 } CNC HORIZONTAL MILLING MACHINE, CINCINNATI 30" MDL. CIM-X, Fanuc 6M CNC control, #50 taper milling spdl., King tool ret...

{ Choice of lots: 63 } RACK, w/quick change toolholders (20) & #50 taper toolholders (5)

RACK, w/quick change toolholders (11) & #50 taper toolholders (5)

RACK, w/#50 taper toolholders (15)

LOT OF TOOLHOLDERS (10), #50 taper

{ Group of lots: 67, 68 } LOT OF COLLETS, assorted

{ Group of lots: 67, 68 } LOT OF INSERT TOOLHOLDERS, assorted

CABINET, w/carbide inserts

TOOL STORAGE CABINET, 8-drawer, w/endmills, reamers, drill sleeves, boring heads, tools

TOOL STORAGE CABINET, 6-drawer, w/studs & hold-downs

TOOL STORAGE CABINET, 6-drawer, w/set-up blocks

TABLE TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS 4" MDL. 340T, 36" x 74" table, 60" table cross travel, approx. 48" vert. travel, approx. 72" l...

LOT OF MORSE TAPER TOOLHOLDERS (located under bench)

ER SPRING COLLET CHUCK SYSTEM, ETM

QUICK CHANGE CHUCK, KWIK-SWITCH, w/toolholders (9)

LOT OF BORING HEADS (2), assorted

{ Group of lots: 78, 78A, 79 } LOT OF FIXTURE CLAMPS, MITEE-BITE MB-8

{ Group of lots: 78, 78A, 79 } LOT OF SCREW JACKS

{ Group of lots: 78, 78A, 79 } CABINET, w/endmills

{ Group of lots: 80, 81 } LOT OF DRILL SLEEVES (9)

{ Group of lots: 80, 81 } STUD SET

T-SLOTTED TABLE, 59" x 27"

RACK, w/tooling

LOT OF RAW MATERIAL: steel stock

steel stock

STEEL ANGLE PLATE, 36" x 36" x 16"

{ Group of lots: 87, 88, 89, 89A } STEEL ANGLE PLATE, 24" x 24" x 14"

{ Group of lots: 87, 88, 89, 89A } STEEL ANGLE PLATE, 24" x 12" x 15"

{ Group of lots: 87, 88, 89, 89A } LOT OF V BLOCKS (3)

{ Group of lots: 87, 88, 89, 89A } LOT CONSISTING OF: V-blocks & fixtures (on one skid)

VERTICAL ROTARY SURFACE GRINDER, MATTISON 48", 24" segmented wheel, approx. 1/2" chuck life, variable neutrofier, approx. 18" ht. under new segmen...

FREE STANDING PEDESTAL JIB CRANE, ABELL-HOWE 3 T. X 9' REACH, approx. 8' ht. under hook, CM Loadstar 3 T. elec. chain hoist w/pendant control, S/N...

ELECTRIC HEAT TREATING FURNACE, WALTZ FURNACE CO. MDL. WF-438-M, sgl. phase, 60 cycle, 220 v., S/N 1236

PLAIN HORIZONTAL MILL, CINCINNATI NO. 3, spds: 18-1300 RPM, #50 NST spdl. taper, 15" x 62-1/2" table, rear controls, assorted arbor suppts., S/N 4...

UNIVERSAL HORIZONTAL MILL, CINCINNATI MDL. 2MH, independent pwrd. Toolmaker's overarm, horiz. spds: 29-1200 RPM, vert. spds: 100-1030 RPM, 10-1/2"...

HORIZONTAL MILL, BRIDGEPORT MDL. J, rd. overarm, 9" x 36" table, belt driven head, spds: 80-2720 RPM, S/N 25088

ENGINE LATHE, LEBLOND 30" X 72" MDL. NI HEAVY DUTY, 2-1/8" spdl. hole, spds: 6.5-400 RPM, taper attach., hardened & ground bedways, Aloris toolpos...

SLIDING GAP BED LATHE, LEBLOND, 27" sw. over head, 42" (closed) & 84" (open) dist. btn. centers, approx. 54" sw. in gap, Servo shift headstock, sp...

ENGINE LATHE, MONARCH 14-1/2" X 30" MDL. 12CK, (2) steadyrests, 14" dia. 4-jaw chuck, 12" dia. 3-jaw chuck, 1-1/4" spdl. hole, S/N 22276

LOT OF TOOLHOLDERS (10), #50 taper

LOT OF TOOLHOLDERS (16), #40 taper

{ Group of lots: 101, 102 } LOT OF TOOLHOLDERS (10), #30 taper

{ Group of lots: 101, 102 } LOT OF TAILSTOCKS (2)

ROTARY TABLE, 15"

{ Group of lots: 104, 105 } LOT OF TAPING HEADS (2)

{ Group of lots: 104, 105 } LOT OF INSERT MILLING CUTTERS (19)

{ Group of lots: 106, 107 } GRINDING HEAD, PRATT & WHITNEY

{ Group of lots: 106, 107 } MILLING HEAD, BRIDGEPORT MDL. T, on slide

ROTARY TABLE, TROYKE 18"

CHUCK, 24" dia. 3-jaw

{ Group of lots: 110, 111, 112, 113 } CHUCK, 12" dia. 3-jaw

{ Group of lots: 110, 111, 112, 113 } CHUCK, 12" dia. 3-jaw

{ Group of lots: 110, 111, 112, 113 } CHUCK, 10" dia. 4-jaw

{ Group of lots: 110, 111, 112, 113 } CHUCK, 10" dia. 3-jaw

TOOLPOST SET, QUICK CHANGE (9 pc.)

ELECTROMAGNETIC CHUCK, 25" x 8"

LOT OF CENTERS, assorted

LOT OF DRILL CHUCKS (9), assorted

LOT OF DRILL SLEEVES, assorted (in one box)