Refine your search

Estimate

Filter by Price Range

Category

There are 376 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240
Page of 7

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

ENGINE LATHE, BIRMINGHAM 16" X 40" MDL. YCL1640, new 2004, 8" sw. over crosslide, spds: 25-2000 RPM, 2-1/2" spdl. hole, 10" dia. 3-jaw chuck, 10" ...

HAND FEED SURFACE GRINDER, KENT 6" X 18" MDL. KGS618, new 12/2003, perm. magnetic chuck, coolant system, 1 HP direct drive wheel, S/N KT30445

{ Choice of lots: 11 } CNC VERTICAL MACHINING CENTER, CAMPRO MDL. CSP-550I, new 2007, Fanuc Series 0i-MC CNC control, 17" x 25-1/2" table, 660 lb....

CNC VERTICAL MACHINING CENTER, CAMPRO MDL. CSP-550I, new 2007, Fanuc Series 0i-MC CNC control, 17" x 25-1/2" table, 660 lb. table load, 21.6" X-ax...

{ Group of lots: 14, 15 } SPIN INDEXER, Type PF70

{ Group of lots: 14, 15 } SPIN INDEXER, PHASE II, S/N H-0220

{ Choice of lots: 16, 17 } INDEXING HEAD, 7", S/N 0373

{ Choice of lots: 16, 17 } INDEXING HEAD, 6-1/2"

Lot 19

MACHINE VISE

{ Choice of lots: 19, 20, 21A } MACHINE VISE

Lot 20

MACHINE VISE

{ Choice of lots: 19, 20, 21A } MACHINE VISE

Lot 21A

6" MACHINE VISE

{ Choice of lots: 19, 20, 21A } 6" MACHINE VISE

{ Group of lots: 26, 27 } LOT CONSISTING OF: drill bits, nuts, bolts, hold-down clamps, etc.

{ Group of lots: 28B, 28C } CNC LATHE, HWACHEON MDL. HI-TECH-200, new 2004, Fanuc 0i-TB CNC control, 19.7" sw. over bed, 13.8" max. turning dia., ...

{ Group of lots: 28B, 28C } BARFEED, MTA INTERNATIONAL MDL. V-65LW, new 2003, S/N 6192,2

{ Group of lots: 29, 30 } CNC LATHE, HWACHEON MDL. HI-TECH-220, new 2004, Fanuc 18T CNC control, 19.7" sw. over bed, 13.8" max. turning dia., 15.7...

RECIPROCATING TYPE AIR COMPRESSOR, SAYLOR BEALL MDL. PL-451512, new 2007, 15 HP motor, 60 gal. horiz. tank, Saylor Beall Mdl. SBD75 refrigerated a...

CNC VERTICAL MACHINING CENTER, MILLTRONICS MDL. RH30, new 2004, Fanuc Series 0i-MC CNC control, 24" x 73" table, 3,000 lb. table load, 60" X-axis ...

{ Choice of lots: 40, 41 } VERTICAL TURRET MILLING MACHINE, BIRMINGHAM MDL. BPV-1054, new 2003, 10" x 54" table, pwr. feed, 2-axis D.R.O., spds: 6...

{ Choice of lots: 40, 41 } VERTICAL TURRET MILLING MACHINE, ACER MDL. ULTIMA-4VK, new 1993, 10" x 50" table, 3-axis D.R.O., #40 taper spdl., spds:...

{ Choice of lots: 43, 45 } VERTICAL TURRET MILLING MACHINE, MILLPORT, new 1985, 9" x 48" table, belt driven head, spds: 80-5440 RPM, 1 HP motor, S...

{ Choice of lots: 43, 45 } VERTICAL TURRET MILLING MACHINE, NT, spdl. spds: 78-4800 RPM, 1-1/2 HP motor, belt driven head, 9" x 42" table, pwr. lo...

{ Group of lots: 50, 51 } PARTS WASHER, ALLIED, 30" x 20" x 10" tank

{ Group of lots: 50, 51 } SELF-DUMPING HOPPER

{ Group of lots: 52, 53, 54, 55, 56, 57, 58, 58A } RIM MOLDING PRESS, CUSTOM C-FRAME TILT FRAME, approx. 50 T. cap., 30"W. x 27" dp. platen size, ...

{ Group of lots: 52, 53, 54, 55, 56, 57, 58, 58A } RIM MOLDING PRESS, CUSTOM C-FRAME TILT FRAME, approx. 50 T. cap., 30"W. x 27" dp. platen size, ...

{ Group of lots: 52, 53, 54, 55, 56, 57, 58, 58A } RIM MOLDING PRESS, CUSTOM C-FRAME TILT FRAME, approx. 50 T. cap., 30"W. x 27" dp. platen size, ...

{ Group of lots: 52, 53, 54, 55, 56, 57, 58, 58A } RIM MOLDING PRESS, CUSTOM C-FRAME TILT FRAME, approx. 50 T. cap., 30"W. x 27" dp. platen size, ...

{ Group of lots: 52, 53, 54, 55, 56, 57, 58, 58A } RIM MOLDING PRESS, CUSTOM C-FRAME TILT FRAME, approx. 50 T. cap., 30"W. x 27" dp. platen size, ...

{ Group of lots: 52, 53, 54, 55, 56, 57, 58, 58A } RIM MOLDING PRESS, CUSTOM C-FRAME TILT FRAME, approx. 50 T. cap., 30"W. x 27" dp. platen size, ...

Loading...Loading...
  • Lots per page
  • 60
  • 120
  • 240
Page of 7

Recently Viewed Lots