WATCHDOG TRANSFORMER, SQUARE D MDL. 35149-17212-069, 3-phase, insulated

LOT OF FIRE EXTINGUISHERS (approx. 30) (on one pallet)

UNITIZED HOIST & TROLLEY UNIT, ACCO-WRIGHT SPEEDWAY 3 T. CAP.

{ Choice of lots: 4,5 } POWER TROLLEY, for overhead bridge cranes

{ Choice of lots: 4,5 } POWER TROLLEY, for overhead bridge cranes

{ Group of lots: 6,7 } ELECTRIC MOTOR, BALDOR, 15 HP, w/variable pitch pulley

{ Group of lots: 6,7 } MOTOR, BALDOR, 50 HP, flanged mtd., H.D.

LOT OF BLOWERS & MOTORS

LOT CONSISTING OF: elec. motors, gears & pulleys (on one pallet)

{ Choice of lots: 10,11,12,13,14,15 } CABLE REEL, 3-phase, H.D., canon plugs

{ Choice of lots: 10,11,12,13,14,15 } CABLE REEL, 3-phase, H.D., canon plugs

{ Choice of lots: 10,11,12,13,14,15 } CABLE REEL, 3-phase, H.D., canon plugs

{ Choice of lots: 10,11,12,13,14,15 } CABLE REEL, 3-phase, H.D., canon plugs

{ Choice of lots: 10,11,12,13,14,15 } CABLE REEL, 3-phase, H.D., canon plugs

{ Choice of lots: 10,11,12,13,14,15 } CABLE REEL, 3-phase, H.D., canon plugs

DRILL PRESS, POWERMATIC 20", Mdl. 1200, adj. ht. table, #3 MT spdl.

DRILL PRESS, RIDGID 15", Mdl. DP15000

BENCH GRINDER, approx. 2 HP motor, on fabricated stand

PEDESTAL GRINDER, MILWAUKEE, 3/4 HP motor, fabricated stand

SPOT WELDER, JANDA MDL. R1-40-24R, 24" throat depth, 40 KVA, air operated, foot pedal control, Intertron Industries weld controller, S/N R2455

{ Group of lots: 21,22,23 } DIGITAL INVERTER WELDING POWER SUPPLY, OTC MDL. DP400

{ Group of lots: 21,22,23 } DIGITAL INVERTER WELDING POWER SUPPLY, OTC MDL. DP400

{ Group of lots: 21,22,23 } ADAPTER, MILLER MDL. SGA100 SPOOLMATE, w/leads, wire feed & gun, S/N KK225924

{ Group of lots: 24,25 } COOLING SYSTEM, MILLER RADIATOR-1 STYLE JF-35

{ Group of lots: 24,25 } CHILLER, BEST WELDS MDL. 3500SS

LOT CONSISTING OF: dual rod ovens, on fabricated stand

LOT CONSISTING OF: welding leads, hoses & guns (on one pallet)

PLASMA CUTTER, THERMALARC MDL. PAK5XR, torch & running gear

RINSE TANK, SE-CUR-ALL, 20 gal. cap.

WATERING TROUGH, 30" x 60", galvanized steel

DRUM RACK, 55 gal. cap., for (3) barrels

FABRICATED TEST STAND

OXY./ACY. BURNING TABLE, LINCOLN TORCHMATE-3, 6' x 12' cap., oxy./acy. torch, 5" gantry clearance, 1/2" mile steel plate cap., aluminum constructi...

LOT CONSISTING OF: electrical panels & wiring (on three pallets)

{ Choice of lots: 35,36,37,38 } POWERED MILLING ATTACHMENT, SUHNER MDL. BEX35K, #40 NST milling head, 1.5 KW drive motor, belt driven

{ Choice of lots: 35,36,37,38 } POWERED MILLING ATTACHMENT, SUHNER MDL. BEX35K, #40 NST milling head, 1.5 KW drive motor, belt driven

{ Choice of lots: 35,36,37,38 } POWERED MILLING ATTACHMENT, SUHNER MDL. BEX35K, #40 NST milling head, 1.5 KW drive motor, belt driven

{ Choice of lots: 35,36,37,38 } POWERED MILLING ATTACHMENT, SUHNER MDL. BEX35K, #40 NST milling head, 1.5 KW drive motor, belt driven

DOWNDRAFT SANDING TABLE, TORIT DONALDSON MDL. T008-1500, 4.3 HP motor, 44" x 42" sanding surface, S/N N.A.

DOWNDRAFT SANDING TABLE, TORIT DONALDSON MDL. T008-1500, 4.3 HP motor, 44" x 42" sanding surface, S/N 49816

WELD FUME COLLECTOR, TORIT MDL. TRUNKLINE 2000, dual cartridges, articulating fume collector, S/N IG372640-1

2-CARTRIDGE DESIGN WELD FUME EXTRACTOR, PORTAHOG, articulating fume hood

CABINET STYLE DUST COLLECTOR, TORIT

CABINET, w/powder coating gun

AIR HEATER, MAXON TYPE 71, 115/230 v.

BATTERY CHARGER, HOBART

ELECTRIC FORKLIFT, PRIME MOVER 3,000 LB. CAP. WRX30, 3,000 lb. cap. @ 24" L.C., 100" max. lift ht., 24 v., battery pwrd., S/N WRX3028279001

POWER PUSHER, NU-STAR, variable spd. control, battery operated

BANDSAW, HYDMECH MDL. SP20, new 1995, 12" rd. cap., end stop, hyd. vise, miter capability, S/N 40795367

LOT CONSISTING OF: pipe fittings, clamps, U-bolts, pump fixtures (on three pallets)

BANDSAW, DOALL MDL. C916, 9" rd. cap., 9" x 16" rect. cap., S/N 438882048

LOT OF STAINLESS STEEL PIPING

HYDRAULIC IRONWORKER, PIRANHA 50 T. CAP. MDL. P50, 1" x 4" flat bar cap., 4" x 4" x ½" angle cutting cap., 1-1/2" rd. bar shear, foot pedal contro...

METER, SMITH 4", Mdl. PEX-P1000

HYDRAULIC CONTROL UNIT, SAUER DANFOSS MDL. VLT5000

ENGINE LATHE, GMC 16" X 40" MDL. GML-1640, H.D., spds: 45-1800 RPM, 6 HP motor, 220 v., S/N 620395

ENGINE LATHE, EMCO MAIER 13" X 30" MDL. MAXIMAT V13, spds: 50-2000 RPM, inch/metric thdng., S/N N.A.

LOT OF STEEL ROLLER CONVEYOR SECTIONS (3)

DRILLING MACHINE, CUSTOM, fabricated steel base, Hypneumat self-feeding drilling head, #3 MT, 2 HP drive motor

VERTICAL BANDSAW, TANNEWITZ MDL. TR3613M, 36" throat depth, 13" max. cutting ht., blade welder & grinder, variable spds: 14-5230 FPM, S/N 83088