{ Group of lots: 59,59A } LOT OF MACHINE TOOLS, misc. (on one pallet)

LOT CONSISTING OF: spade tip drill bits & boring bars (on one pallet)

{ Group of lots: 61,62 } LOT OF MACHINE TOOLS (in one tub)

{ Group of lots: 61,62 } LOT OF MACHINE PARTS (on one pallet)

{ Group of lots: 63,64 } LOT OF MACHINE PARTS (on one pallet)

{ Group of lots: 63,64 } LOT OF MACHINE PARTS (on one pallet)

{ Group of lots: 65,66 } LOT OF MACHINE VISES (on one pallet)

{ Group of lots: 65,66 } LOT CONSISTING OF: machine vises & swivel bases (on one pallet)

LOT OF TOOLING (on one pallet)

ANALOG TYPE HARDNESS TESTER, ROCKWELL TYPE MDL. HR150A, new 2007, S/N 2730

BOLT CIRCLE DRILL, BABIN MDL. 12", S/N 12-186

PEDESTAL JIB CRANE, 11' ht x 12 1/2' reach, 1 T. cap., chain fall hoist

ENGINE LATHE, AXELSON 28-3/4" X 72", spds: 20-300 RPM, 20 HP main motor, 2-1/4" hole, 24" dia. 4-jaw chuck, (2) steadyrests, taper, S/N 1601

RAM TYPE TURRET LATHE, WARNER & SWASEY 3A, 6" spdl. hole, 6 pos. turret, 21" dia. 4-jaw chuck, S/N 951982

ENGINE LATHE, MONARCH 18-1/2" X 54", spds: 24-1000 RPM, 16" dia. 4-jaw chuck, 1-1/2" spdl. hole, thdng., taper, S/N 34956

{ Group of lots: 73,74 } TOOL & CUTTER GRINDER, BROWN & SHARPE

{ Group of lots: 73,74 } TOOL & CUTTER GRINDER, HARO SWIFT TOOL

RECIPROCATING TYPE AIR COMPRESSOR, INGERSOLL RAND, 5 HP motor, vert. air receiver

LOT OF SHOP LADDERS: A-frame, extendable & roll around

LOT OF MACHINE TOOLS, misc. (on two pallets)

ENGINE LATHE, HENDY 14" X 30", toolroom type

O.D. MICROMETER, STARRETT, 18" to 24"

O.D. MICROMETER, STARRETT, 20" to 24"

O.D. MICROMETER, STARRETT, 16" to 20"

LOT OF STANDARDS

RADIUS CUTTER, large cap.

LOT OF O.D. MICROMETERS

LOT OF VERTICAL HEIGHT GAUGES (2), TRIMOS

LOT OF O.D. MICROMETERS

LOT OF O.D. MICROMETERS

{ Group of lots: 88,89 } LOT OF O.D. MICROMETERS

{ Group of lots: 88,89 } O.D. MICROMETER, MITUTOYO, 12" to 16"

LOT OF TOOLING, misc. (on metal racks)

SURFACE GRINDER

STEADYREST, H.D.

PLAIN HORIZONTAL MILL, CINCINNATI MDL. 3, 15" x 60" table, S/N N.A.

CNC VERTICAL MILL, HURCO MDL. KM3P, Hurco Ultimax dual screen control, spds: 60-400 RPM, Graymills auto. mist coolant, misc. tooling, S/N KDB-8003...

VERTICAL TURRET MILL, BRIDGEPORT SERIES II (parts machine)

TOOL AND CUTTER GRINDER, OK, w/comparator

LOT OF TOOLING, misc. (on three shelves)

Fishing Rods

VERTICAL TURRET MILL, TURN-PRO MDL. GS18V, 10" x 56" table, spds: 70-4200 RPM, 3 HP motor, pwr. long. table feed, Anilam Wizard 550 3-axis D.R.O.,...

ENGINE LATHE, AMCO 20" X 60" MDL. CD6245CX1500 GAP BED TYPE, new 2004, spds: 24-1600 RPM, 22" gap, 3" hole, 12" dia. 3-jaw chuck, 6 KW/8 HP main m...

CNC SLANT BED CHUCKER, MORI SEIKI MDL. SL-2A, Fanuc 3T CNC control, 2.25" hole, 10 pos. tool turret, 10" dia. 3-jaw chuck, S/N 1742

VERTICAL TURRET MILL, BRIDGEPORT, 9" x 48" table, 2 HP motor, pwr. long. table feed, Newall Mdl. DP7 2-axis D.R.O., S/N BR274300

VERTICAL TURRET MILL, TURN-PRO MDL. GS15V, 9" x 48" table, spds: 70-4200 RPM, 3 HP motor, pwr. long. table feed, Anilam Wizard 550 3-axis D.R.O., ...

ENGINE LATHE, LONGEM 20" X 80" MDL. LG-2800DS, new 2007, spds: 22.4-1600 RPM, 3" spdl. hole, 12" dia. 3-jaw chuck, threading, Anilam Wizard 2-axis...

MECHANICAL SHAPER, SMITH & MILLS 25" MDL. 25 B.C., 17-1/2" x 25" T-slotted table, 17" X-axis travel, 16" ht. adj., S/N N.A.

HORIZONTAL BANDSAW, TURN-PRO 10" X 17" MDL. BS-250A, spds: 82-235 RPM, 2 HP motor, S/N 0602065

ENGINE LATHE, LONGEM 20" X 80" MDL. LG-2800DS, spds: 22.4-1600 RPM, 3" spdl. hole, 10" dia. 3-jaw chuck, Acu-Rite 2-axis D.R.O., taper, S/N 040046

{ Choice of lots: 107,108 } PEDESTAL JIB CRANE, 11' ht. x 12-1/2' reach, 1 T. cap. chain fall hoist

{ Choice of lots: 107,108 } PEDESTAL JIB CRANE, 12' ht. x 17' reach, 1 T. cap. chain fall hoist

FORKLIFT, CLARK 4,000 LB. CAP., LPG engine, 83" 2-stage mast, 42" forks, cushion tires, S/N N.A.

PORTABLE WELDER, diesel engine, skid mtd.

LOT OF SCRAP METAL (in four wire bends)

GOOSENECK TRAILER, 28', tandem axle, new 2006, VIN, 17YGN282563032113

LOT OF BOAT MOTORS (3) (on one pallet)

RIDING LAWN MOWER, JOHN DEERE MDL. LA 110, automatic

JIG MILL, DEVLIEG MDL. 3-B, 30" x 48" T-slotted table, 3" spdl., spds: 23-1200 RPM

HAND FEED SURFACE GRINDER, DOALL 6" X 12", reciprocating type