- List
- Grid
-
333 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
LOT OF CARBIDE INSERT TURNING TOOLS
LOT OF CARBIDE INSERT TURNING TOOLS
LOT OF CARBIDE INSERT TURNING TOOLS
LOT OF CARBIDE INSERT TURNING TOOLS
LOT OF CARBIDE INSERT TURNING TOOLS
LOT OF CARBIDE INSERT TOOL HOLDERS
LOT OF CARBIDE INSERT TOOL HOLDERS
LOT OF CARBIDE INSERT TOOL HOLDERS
LOT OF CARBIDE INSERT TOOL HOLDERS
LOT OF CARBIDE INSERT TOOL HOLDERS
LOT OF CARBIDE INSERT TOOL HOLDERS
LOT OF CARBIDE INSERT TOOL HOLDERS
INCLINED WHEEL PRESS, RODGERS 300 T. CAP. MDL. IF300D-7210, 75 deg., 72" btn. frames, 12" to 120"
INCLINED WHEEL PRESS, RODGERS 300 T. CAP. MDL. IF300D-7210, 75 deg., 72" btn. frames, 12" to 120" daylight w/ram retracted, 16-1/4" press yoke wid...
INCLINED WHEEL PRESS, K.R. WILSON 125 T. CAP., 20" stroke, 8" cylinder bore, 148" ram face to
INCLINED WHEEL PRESS, K.R. WILSON 125 T. CAP., 20" stroke, 8" cylinder bore, 148" ram face to resistance block, 50" btn. strain bars, 10" centers ...
FLOOR FLUSH-MOUNT BLAST ROOM, BCP (Blast Cleaning Products), 122" x 115" x 116" ht. interior
FLOOR FLUSH-MOUNT BLAST ROOM, BCP (Blast Cleaning Products), 122" x 115" x 116" ht. interior dims., 12 HP, attached dust collector w/Chicago blowe...
BLAST SAND BLASTING CABINET, ZERO 6' X 6' X 5'
WET/DRY BLAST UNIT, 48" table
WET/DRY BLAST UNIT, 48" table
SANDBLAST CABINET, ABRASIVE MDL. 41800
MECHANICAL PRESS BRAKE, CHICAGO DRIES & KRUMP 90 T. X 14' MDL. 1420-L (used)
LOT OF UNI-PUNCH FRAMES & TOOLING
LOT OF UNI-PUNCH FRAMES & TOOLING
LOT OF UNI-PUNCH FRAMES & TOOLING
LOT OF UNI-PUNCH FRAMES & TOOLING
MECHANICAL PRESS, VERSON 150 T. CAP. MDL. B-76, 3" stroke, 12" shut height, 5" adj., 30 SPM, 96" x
MECHANICAL PRESS, VERSON 150 T. CAP. MDL. B-76, 3" stroke, 12" shut height, 5" adj., 30 SPM, 96" x 22" bed area, 96" x 17" ram area, 7.5 HP, S/N 1...
LOT OF ASSORTED PRESSBRAKE TOOLING, PUNCHES & DIE HOLDERS - 10' up to 14'
HYDRAULIC SQUARING SHEAR, ERMAK 10' X 5/16" MDL. HGS, new 2007, 120" cutting length, 5/16" mild
HYDRAULIC SQUARING SHEAR, ERMAK 10' X 5/16" MDL. HGS, new 2007, 120" cutting length, 5/16" mild steel, (16) SPM, 20 HP, S/N 2654
HYDRAULIC POWER SQUARING SHEAR, CINCINNATI 12' X 1/4" MDL. 2H12, 1/4" mile steel, 3/16" stainless,
HYDRAULIC POWER SQUARING SHEAR, CINCINNATI 12' X 1/4" MDL. 2H12, 1/4" mile steel, 3/16" stainless, 3/8" aluminum, 144" cut length, 13-28 SPM, 3/8"...
HYDRAULIC GUILLOTINE SHEAR, 10' x 1/2" PULLMAX MDL. GSA-430, 120" cutting length, 1/2" mild steel, 5/8" x 8' max. cutting cap. at 75% of max. ang...
ENGINE LATHE, AXELSON 52" X 240" MDL. A32, headstock raised 8-3/4", 52" sw. over bed, 36-1/2" sw.
ENGINE LATHE, AXELSON 52" X 240" MDL. A32, headstock raised 8-3/4", 52" sw. over bed, 36-1/2" sw. over crosslide, 240" centers, 2-5/16" spdl. bore...
ENGINE LATHE, MONARCH 33-1/2" X 168" MDL. 25N, 33-1/2" sw. over bed, 168" centers, 2-1/4" spdl.
ENGINE LATHE, MONARCH 33-1/2" X 168" MDL. 25N, 33-1/2" sw. over bed, 168" centers, 2-1/4" spdl. bore, 30 HP, (24) spdl. spds: 10-505 RPM (56) fds:...
HOLLOW SPINDLE LATHE, LEHMANN 24" X 192", 12.15" spdl. bore, 24" sw. over bed, 16" sw. over carriage, 192" centers, 30 HP, (16) spdl. spds: 10-397...
HORIZONTAL BORING MILL, TOS VARNSDORF 4", 4" spdl., No. 50 taper, (23) spdl. spds: 7.1-1,120 RPM, (
HORIZONTAL BORING MILL, TOS VARNSDORF 4", 4" spdl., No. 50 taper, (23) spdl. spds: 7.1-1,120 RPM, (16) faceplate spds: 7.1-224 RPM, 49.2" x 49.2" ...
HORIZONTAL BORING MILL, GIDDINGS & LEWIS 3" MDL. 300-T, 3" spdl. dia., No. 5 MT spdl. taper, 36" x
HORIZONTAL BORING MILL, GIDDINGS & LEWIS 3" MDL. 300-T, 3" spdl. dia., No. 5 MT spdl. taper, 36" x 72" tbl., 10 HP spdl. motor, spds: 10-1300 RPM,...
ROTARY TABLE, GIDDINGS & LEWIS 36"
ROTARY TABLE, GIDDINGS & LEWIS 36"
Loading...-
333 item(s)/page