Refine your search
Filtered by:
- Category
- List
- Grid
-
176 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
Hinds-Bock 16-Head Topping / Cream Cheese / Frosting Applicator, M/N 16P-02V, S/N 4537, Designed
Hinds-Bock 16-Head Topping / Cream Cheese / Frosting Applicator, M/N 16P-02V, S/N 4537, Designed to be Fed Directly from Slurry Mixer, Puts Dollop...
S/S Rolling Catch-All, Dish Bottom Cart, (48"x48"x40") (Rigging, Loading, Handling Fee: $50) (
S/S Rolling Catch-All, Dish Bottom Cart, (48"x48"x40") (Rigging, Loading, Handling Fee: $50) (Located in Lindon, UT) ...[more]
Posimat N15 Rotary Bottle Unscrambler, Now tooled for a plastic container aprox. 2.25" Dia. x 6"
Posimat N15 Rotary Bottle Unscrambler, Now tooled for a plastic container aprox. 2.25" Dia. x 6" H, Uses Allen Bradley SLC 5/03 PLC Controls and A...
S/S Cap Hopper with Dayton 1/30 HP/CV Motor (INV #74932) (Located Hanford, CA) ...[more]
AMS Fully Automatic Auger Filler, Model A-400E, S/N A-400171E with Bottom Discharge Opening Measurement 3" Diameter, Top Opening Measurement 22" D...
Klockner Medick Horizontal Blister Packaging Machine, Model CP-2EL, S/N 94KM019 with 220 V, 3 Phase,
Klockner Medick Horizontal Blister Packaging Machine, Model CP-2EL, S/N 94KM019 with 220 V, 3 Phase, 60 Cycle, FOB FL (Located Hialeah, FL) ...[m...
Roller Conveyor - 23 Inches Wide X 36 Inches Long. As shown in photos (Located Central New York)
Roller Conveyor - 23 Inches Wide X 36 Inches Long. As shown in photos (Located Central New York) ...[more]
Conveyor. 8' Long, Variable Speed, 4" Wide Plastic Chain. 36" Tall. (Located Central New York)
Conveyor. 8' Long, Variable Speed, 4" Wide Plastic Chain. 36" Tall. (Located Central New York) ...[more]
AutoProd 2 x 4 Lane Inline 51 mm Portion Pack Filler, S/N 1443. Was just serviced by R.A. Jones
AutoProd 2 x 4 Lane Inline 51 mm Portion Pack Filler, S/N 1443. Was just serviced by R.A. Jones Back in December 2020. Updated PLCs Heater Contr...
Boc Gases S/S Nitrogen Tunnel, M/N KFIT38.10M, S/N 30.073.02, with Aprox. 37" W S/S Mesh Conveyor,
Boc Gases S/S Nitrogen Tunnel, M/N KFIT38.10M, S/N 30.073.02, with Aprox. 37" W S/S Mesh Conveyor, with Aprox. 2-3/4" H Tunnel Clearance, 460 Volt...
S/S Dip Rinse Hoppers, with Aprox. 35-1/2" W S/S Mesh Conveyor, with Bottom Mounted Centrifugal
S/S Dip Rinse Hoppers, with Aprox. 35-1/2" W S/S Mesh Conveyor, with Bottom Mounted Centrifugal Pump, with 3-Horizontal Rinse Bars, with Side Moun...
S/S Dip Rinse Hoppers, with Aprox. 35-1/2" W S/S Mesh Conveyor, with Bottom Mounted Centrifugal
S/S Dip Rinse Hoppers, with Aprox. 35-1/2" W S/S Mesh Conveyor, with Bottom Mounted Centrifugal Pump, with 2-Horizontal Rinse Bars, with Side Moun...
S/S Dip Rinse Hoppers, with Aprox. 35-1/2" W S/S Mesh Conveyor, with Bottom Mounted 5 hp Centrifugal
S/S Dip Rinse Hoppers, with Aprox. 35-1/2" W S/S Mesh Conveyor, with Bottom Mounted 5 hp Centrifugal Pump, with 3-Horizontal Rinse Bars, with Side...
Allen S/S Shaker Deck, Overall Dims.: Aprox. 140" L x 62" W x 50-1/2" H, with Aprox. 32" W Deck,
Allen S/S Shaker Deck, Overall Dims.: Aprox. 140" L x 62" W x 50-1/2" H, with Aprox. 32" W Deck, Mounted on S/S Portable Frame (NOTE: Recently Ref...
Aprox. 15 Gal. S/S Tilt Kettle, M/N VEC12TW, S/N AP-1036119-10X-5458, 208 Volts, 3 Phase, Kettle
Aprox. 15 Gal. S/S Tilt Kettle, M/N VEC12TW, S/N AP-1036119-10X-5458, 208 Volts, 3 Phase, Kettle Dims.: Aprox. 18" Deep x 15-3/4" Dia., Mounted o...
VERTEX/WeighPack VFFS, M/N 750, S/N 1652, 40 PSI, Mounted on Portable S/S Frame (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management Fee...
Aprox. 150 Gal. S/S Single Wall Vertical Tank, Tank Internal Dims.: Aprox. 34" Tall x 37-1/2"
Aprox. 150 Gal. S/S Single Wall Vertical Tank, Tank Internal Dims.: Aprox. 34" Tall x 37-1/2" Dia., with Bottom S/S Butterfly Valve, Mounted on S...
Aprox. 250 Gal. S/S Kettle, with S/S Agitation, with Uninstalled Motor, Mouned on S/S Legs (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Man...
Stein S/S Application Mesh Conveyor, with Aprox. 8" W Mesh Conveyor, with S/S Clad Centrifugal Pump,
Stein S/S Application Mesh Conveyor, with Aprox. 8" W Mesh Conveyor, with S/S Clad Centrifugal Pump, with (4) Conveyor Mounted Brush Applicators, ...
MetalCraft 150 Gal. S/S Jacketed Tank, M/N 1003400, S/N 18383-1, with Ammonia Jacket 150 PSIG,
MetalCraft 150 Gal. S/S Jacketed Tank, M/N 1003400, S/N 18383-1, with Ammonia Jacket 150 PSIG, Design Temp. 100 F, with Aprox. 68" L Legs (LOCATED...
Doboy Top Sealer, M/N CBS-13, S/N 88-11239, 460 Volts, 3 Phase, with Straight Section of Conveyor,
Doboy Top Sealer, M/N CBS-13, S/N 88-11239, 460 Volts, 3 Phase, with Straight Section of Conveyor, Aprox. 100" L x 6" W Belt (LOCATED IN DOUGLAS, ...
Hamilton 40 Gal. S/S Kettle, Style 3A, S/N D-1857-1, 60 PSI @ 200 F, with Centrifugal Pump, with S/S
Hamilton 40 Gal. S/S Kettle, Style 3A, S/N D-1857-1, 60 PSI @ 200 F, with Centrifugal Pump, with S/S Clad Motor, Mounted on S/S Portable Frame (LO...
Trojan UV Logic 200 Gal. Per Min. UV System, S/N 2201, with (2) 15 hp Centrifugal Pumps, Mounted
Trojan UV Logic 200 Gal. Per Min. UV System, S/N 2201, with (2) 15 hp Centrifugal Pumps, Mounted on S/S Skid (LOCATED IN DOUGLAS, GA) (Rigging, Ha...
S/S Tumbler, Aprox. 42" Dia. Tumbler Chamber, Mounted on S/S Portable Frame (LOCATED IN DOUGLAS, GA)
S/S Tumbler, Aprox. 42" Dia. Tumbler Chamber, Mounted on S/S Portable Frame (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management Fee: ...
Barry-Wehmiler/Hayssen VFFS, M/N 12-16HP, S/N T86734, 480 Volts, 1 Phase (LOCATED IN DOUGLAS, GA) (
Barry-Wehmiler/Hayssen VFFS, M/N 12-16HP, S/N T86734, 480 Volts, 1 Phase (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management Fee: $650....
S/S Shrink Tunnel, with Aprox. 19" W Belt, with Aprox. 8" Clearance, Mounted on Portable Frame (
S/S Shrink Tunnel, with Aprox. 19" W Belt, with Aprox. 8" Clearance, Mounted on Portable Frame (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Sit...
Shanklin Shrink Tunnel, M/N T71, S/N T05119, 230 Volts, 3 Phase, with Aprox. 12-3/4" W Belt, Mounted
Shanklin Shrink Tunnel, M/N T71, S/N T05119, 230 Volts, 3 Phase, with Aprox. 12-3/4" W Belt, Mounted on Portable Frame (LOCATED IN DOUGLAS, GA) (...
G & H 2 hp Rotary Pump, M/N GHPD-432RF, S/N 99-7-8584A, 1715 RPM, with S/S Control Panel, Mounted on
G & H 2 hp Rotary Pump, M/N GHPD-432RF, S/N 99-7-8584A, 1715 RPM, with S/S Control Panel, Mounted on S/S Frame (LOCATED IN DOUGLAS, GA) (Rigging, ...
ActionPac Dual Shaker Feeder, with S/S Infeed Chute, Mounted on S/S Frame (LOCATED IN DOUGLAS,
ActionPac Dual Shaker Feeder, with S/S Infeed Chute, Mounted on S/S Frame (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management Fee: $50....
Ulma Taurus S/S Tray Packer, M/N TAURUS 570, S/N 7210060, 220 Volts, with Vacuum Pump, with (2)
Ulma Taurus S/S Tray Packer, M/N TAURUS 570, S/N 7210060, 220 Volts, with Vacuum Pump, with (2) Carts of Spare Molds (LOCATED IN DOUGLAS, GA) (Ri...
Stein S/S Fryer, M/N DHF 3413 TF, S/N 175, with S/S Mesh Belt, Aprox. 36" W, with Dual Electric
Stein S/S Fryer, M/N DHF 3413 TF, S/N 175, with S/S Mesh Belt, Aprox. 36" W, with Dual Electric Hoist & S/S Frame System, Overall Dims.: Aprox. 16...
Straight Section of S/S Mesh Conveyor, Overall Length: Aprox. 17' L, Mounted on S/S Portable
Straight Section of S/S Mesh Conveyor, Overall Length: Aprox. 17' L, Mounted on S/S Portable Frame (LOCATED IN DOUGLAS, GA) (Rigging, Handling, ...
L-Bars Sealers, Includes 1-Shanklin L-Bar Sealer, M/N 9230, S/N 88581, 115 Volts, 1 Phase, with 1-
L-Bars Sealers, Includes 1-Shanklin L-Bar Sealer, M/N 9230, S/N 88581, 115 Volts, 1 Phase, with 1-Heat Seal S/S L-Bar Sealer, Mounted on Portable ...
S/S Heat Valving & Piping Skid, with Bottom Mounted Centrifugal Pump, Mounted on S/S Skid (LOCATED
S/S Heat Valving & Piping Skid, with Bottom Mounted Centrifugal Pump, Mounted on S/S Skid (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Mana...
(3) S/S Control Panels, Assorted Sizes (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management Fee: $50.00 USD) ...[more]
S/S Melt & Pump System, with Centrifugal Pump & Vertical S/S Reservoir, with Internal Heating
S/S Melt & Pump System, with Centrifugal Pump & Vertical S/S Reservoir, with Internal Heating Coil, with Control Panel, Mounted on S/S Skid, with ...
IKA Dispurser, Type DR3/5/CIP, M/N P008466, S/N1357, with Siemens 10 hp Motor, 3506 RPM, with 1-1/2" Clamp Type Inlet/Outlet (LOCATED IN DOUGLAS, ...
3M-Matic S/S Adjustable Case Sealer, M/N 18900, S/N 2023, 110 Volts (LOCATED IN DOUGLAS, GA) (
3M-Matic S/S Adjustable Case Sealer, M/N 18900, S/N 2023, 110 Volts (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management Fee: $50.00 U...
Belshaw S/S Thermoglazer, Mounted on S/S Frame (NOTE: Missing Belt)(LOCATED IN DOUGLAS, GA) (
Belshaw S/S Thermoglazer, Mounted on S/S Frame (NOTE: Missing Belt)(LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management Fee: $50.00 U...
3M-Matic Case Sealing Machine, with Top & Bottom Tape Heads, Mounted on Portable Frame (LOCATED IN
3M-Matic Case Sealing Machine, with Top & Bottom Tape Heads, Mounted on Portable Frame (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Manage...
(2) S/S Control Panels, Assorted Sizes (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management Fee: $50.00 USD) ...[more]
PES S/S Laner Conveyor, with Plastic Belt, with Aprox. 32" W Belt (LOCATED IN DOUGLAS, GA) (Rigging,
PES S/S Laner Conveyor, with Plastic Belt, with Aprox. 32" W Belt (NOTE: Needs Belt) (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Manageme...
Boyd S/S Deglazer & Thaw Tunnel, with Aprox. 21-1/2" W S/S Mesh Conveyor, Mounted on S/S Portable Fr
Boyd S/S Deglazer & Thaw Tunnel, with Aprox. 21-1/2" W S/S Mesh Conveyor, Mounted on S/S Portable Frame (LOCATED IN DOUGLAS, GA) (Rigging, Handlin...
MP Flatener, Overall Dims.: Aprox. 64" L x 64" W (NOTE: Missing Belt) (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management Fee: $100.00 ...
(2) S/S Straight Sections of Mesh Conveyor, Aprox. 34" W & Aprox. 39" W Mesh Belts, Mounted on S/S
(2) S/S Straight Sections of Mesh Conveyor, Aprox. 34" W & Aprox. 39" W Mesh Belts, Mounted on S/S Frames (LOCATED IN DOUGLAS, GA) (Rigging, Hand...
Hartell S/S 7.5 hp Blowers, M/N 846-18606-S4FCJ3, 3,700 CFM, Mounted on S/S Frame (LOCATED IN DOUGLA
Hartell S/S 7.5 hp Blowers, M/N 846-18606-S4FCJ3, 3,700 CFM, Mounted on S/S Frame (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management F...
Shanklin S/S L-Bar Sealer, M/N A23SST, S/N S0263, 230 Volts, 3 Phase, Mounted on S/S Portable
Shanklin S/S L-Bar Sealer, M/N A23SST, S/N S0263, 230 Volts, 3 Phase, Mounted on S/S Portable Frame (LOCATED IN DOUGLAS, GA) (Rigging, Handling, &...
Rockford Tray Forming Machhine, with Drives & Allen-Bradley Panel View 600, Mounted on S/S Frame (
Rockford Tray Forming Machhine, with Drives & Allen-Bradley Panel View 600, Mounted on S/S Frame (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & S...
Eastey L-Bar Sealer, M/N EM1622T, S/N 13371622T11, Mounted on Portable Frame (LOCATED IN DOUGLAS,
Eastey L-Bar Sealer, M/N EM1622T, S/N 13371622T11, Mounted on Portable Frame (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management Fee: ...
Versapply Inline Labeling System, M/N 9100R-40, S/N 06319308, with Straight Section of Conveyor,
Versapply Inline Labeling System, M/N 9100R-40, S/N 06319308, with Straight Section of Conveyor, with Aprox. 6" W Plastic Chain (LOCATED IN DOUGLA...
3-Sections of S/S Product Conveyor, with 2-Curve Sections & 1- Straight Section, 2-with Aprox. 4-1/
3-Sections of S/S Product Conveyor, with 2-Curve Sections & 1- Straight Section, 2-with Aprox. 4-1/2" W Plastic Product Conveyor Belt (LOCATED IN ...
S/S Portable Hopper, with 1-Section of End Fryer Unit on S/S Frame (LOCATED IN DOUGLAS, GA) (
S/S Portable Hopper, with 1-Section of End Fryer Unit on S/S Frame (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management Fee: $100.00 U...
Straight Section of S/S Mesh Conveyor, with S/S Mesh Bet, Aprox. 54" W Belt (LOCATED IN DOUGLAS, GA)
Straight Section of S/S Mesh Conveyor, with S/S Mesh Bet, Aprox. 54" W Belt (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management Fee: ...
Pallet of S/S Resvoirs, Assorted Sizes, On (1) Pallet (LOCATED IN DOUGLAS, GA) (Rigging, Handling, &
Pallet of S/S Resvoirs, Assorted Sizes, On (1) Pallet (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management Fee: $50.00 USD) ...[more]
Eastey L-Bar Sealer, M/N EM1622T, S/N 13551622TPP110, 110 Volts, 1 Phase (LOCATED IN DOUGLAS, GA) (
Eastey L-Bar Sealer, M/N EM1622T, S/N 13551622TPP110, 110 Volts, 1 Phase (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management Fee: $10...
PFM Flow Wrapper, M/N PFM 30-M, S/N 024 198, 220 Volts, 1 Phase, On Portable Frame (LOCATED IN
PFM Flow Wrapper, M/N PFM 30-M, S/N 024 198, 220 Volts, 1 Phase, On Portable Frame (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management ...
Incline S/S Conveyor, with Aprox. 105" L x 12" W, Mounted on S/S Frame (LOCATED IN DOUGLAS, GA) (
Incline S/S Conveyor, with Aprox. 105" L x 12" W, Mounted on S/S Frame (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management Fee: $150....
S/S Hood Systems, Overall Dims.: Aprox. 72" L x 26" W x 48" H (LOCATED IN DOUGLAS, GA) (Rigging,
S/S Hood Systems, Overall Dims.: Aprox. 72" L x 26" W x 48" H (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management Fee: $100.00 USD) .....
S/S Hood Systems, Overall Dims.: Aprox. 72" L x 26" W x 48" H (LOCATED IN DOUGLAS, GA) (Rigging,
S/S Hood Systems, Overall Dims.: Aprox. 72" L x 26" W x 48" H (LOCATED IN DOUGLAS, GA) (Rigging, Handling, & Site Management Fee: $100.00 USD) .....
3-Pce. Conveyor, with 1-Pce. Aprox. 72" L, Mounted on Wheels, 1-Pce. Aprox. 117" Lx with 1- Curve
3-Pce. Conveyor, with 1-Pce. Aprox. 72" L, Mounted on Wheels, 1-Pce. Aprox. 117" Lx with 1- Curve Section of Conveyor with No Legs (LOCATED IN DOU...
Loading...-
176 item(s)/page