Edwards 1250 x 3.5mm powered guillotine, model 3.5/1250, serial no: 823850255, power back gauge dimensioned front supports, and rear safety enclos...

Unbadged hydraulic 4 ram twin section 8 column through feed vertical press, with 2 x 400mm width x 1200mm in/out feed conveyors and power pack. (A...

Oliver hydraulic 14 stage duplex roll former with guarding *(please note: A work Method Statement and Risk Assessment must be reviewed and approve...

Oliver powered double ended straight folding machine, serial no: 31-6R-93, max band width approx 950mm, approx max length between bending heads 26...

All inclusive lots 13 to 15 including main control station *(please note: A work Method Statement and Risk Assessment must be reviewed and approve...

Oliver hydraulic twin duplex shelf, 12 & 14 stage roll former, serial no: 14 HDTH2383 *(please note: A work Method Statement and Risk Assessment m...

All inclusive lots 31 to 32 including main controller and guarding *(please note: A work Method Statement and Risk Assessment must be reviewed and...

Carbonini Glie straightening and cut to length machine, approx max width 450mm, with powered outfeed conveyor *(please note: A work Method Stateme...

Unbadged twin station rotating decoiler. *(please note: A work Method Statement and Risk Assessment must be reviewed and approved by the Auctionee...

Besoncon single station decoiler.*NB: This item does not comply with current health and safety standards regarding guarding and will require risk ...

Clarks single station decoiler, model VSR12E2M, serial no: 13828, capacity 500kg.*NB: this item has no CE marking.  The Purchaser is required to s...

Wagner ESB Powder Coating, through feed application tunnel, type: 3113714, serial no: 1372, 240v, approx length 4m, apperture size approx 1500mm x...

Gema Volstatic type APS-2 12 rack applicator control unit, serial no: 8601079. *(please note: A work Method Statement and Risk Assessment must be ...

Powered throughfeed transfer conveyor system, approx total length 50m, including circa 12 steel pillar supports, with Fenner Speed Ranger 2030 adj...

Airflow Product Finishing throughfeed 2 stage pre-treatment plant, with control and extraction to atmosphere, approx total length 12m, width 2m, a...

Airflow Product Finishing throughfeed 2-pass drying/curing oven, approx 6 x 3m, with twin ceiling mounted fans and Satronic MMG810.1 gas fired hea...

All inclusive lots 60 to 64. *(please note: A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to a...

Gema Volstatic MPS 1-B mobile applicator units with Gema P6-1 hand held gun, serial no: ASEV 91.1 11861 ...[more]

Gema Volstatic MPS 1-B mobile applicator units with Gema P6-1 hand held gun, serial no: TBC ...[more]

Steel, stand alone vertical spray booth, approx 2m x 900mm, with flexi hose extraction ducting ...[more]

Throughfeed 3-stage pre-treatment plant, approx length 11m, width 2m, with twin treatment storage tanks, Calorex 510 fluid pump, steel frame and e...

Thorid throughfeed 4-pass drying oven, approx dimensions 12 x 3.5m, apperture size 270 x 550mm, access ladder and gantry, two side access doors, w...

Thorid throughfeed application tunnel with cyclone extraction and twin box collector, mounted on steel skid frame and floor mounted rails, approx ...

Gema Volstatic powder paint spray system including 2 x control cabinets, 2 x vertical reciprocating spraying arms and 16 x spray guns including in...

KEK powder doser.*(please note: A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to any removal w...

Thorid throughfeed application tunnel with cyclone extraction and twin box collector, mounted on steel skid frame and floor mounted rails, approx ...

Gema Volstatic powder paint spray system including 2 x control cabinets, 2 x vertical reciprocating spraying arms and 16 x spray guns including in...

Thorid throughfeed 2-pass curing oven, approx dimensions 10 x 3m, with roof mounted fans and extraction ducting to atmosphere (x3), apperture widt...

Powered throughfeed transfer conveyor system, approx total length 140m, including circa 20 uprights, approx height 4m - 6m*(please note: A work Me...

All inclusive lots 69 to 74 (Thorid powder coating plant)*(please note: A work Method Statement and Risk Assessment must be reviewed and approved ...

Kek mobile pneumatic powder sifting unit, serial no: 737913 SO 77033 (1993). ...[more]

Harrison SS and ST gap bed centre lathe, 9" swing, quick change tool post, 1000rpm, serial no: 110719, with 3 jaw and 4 jaw chuck. *Please note: A...

Taft-Pierce No 1 precision surface grinder, with Eclipse magnetic chuck, and sliding table, serial no: 253

Atkin double headed roll feed, serial no: W4822D, max width capacity 500mm (working condition unknown) (please note this lot can only be removed b...

Two various Oliver through feed roll formers (working condition unknown) (please note this lot can only be removed between Monday 9th and Thursday...

Atkin type 52 press feed, serial no: W4822B (3 phase), apperture size 500mm (working condition unknown) (please note this lot can only be removed ...

Two Atkin / Oliver adjustable horizontal through feed roll formers, model Flexi Belt, serial nos: 14258/B (1988), max width circa 1000mm (3 phase)...

Atkin hydraulic leveller, serial no: W4822J (working condition unknown). (please note this lot can only be removed between Monday 9th and Thursday...

Forward Precision Equipment Ltd throughfeed hydraulic former, model SP, serial no: 7655 12-95  (please note this lot can only be removed between M...

Formit throughfeed horizontal roll former, model F.O., serial no: F4595 (1996)  (please note this lot can only be removed between Monday 9th and T...

Unbadged throughfeed horizontal roll former (working condition unknown). (please note this lot can only be removed between Monday 9th and Thursday...

Gauer Metal Products 5H edging machine (working condition unknown). (please note this lot can only be removed between Monday 9th and Thursday 12th...

Meritus AP30 welder (sold as spares/repairs) (please note this lot can only be removed between Monday 9th and Thursday 12th March 2020. No further...

Wrought iron macinery including 3 individual pneumatic powered forming machines*(Please note: A work Method Statement and Risk Assessment must be ...