WATER GLYCOL. TEMP 48-70 DEGREES MAXIMUM OPERATING PRESSURE 100 PSI, ¾-HP PUMP, R22 REFRIGERANT, TEMPTEK DIGITAL CONTROLS, S/N: 5-5-6026 (1995) [L...

4-KW, ¾-HP PROCESS PUMP, 9.6 GPM, 30-PSI, 5,000 CFM CONDENSER, R-22 REFRIGERANT, CONTROLS, S/N: 105158 (2007) [LOCATED IN RONKONKOMA, NY] ...[mor...

4-HP COMPRESSOR, 1.5-HP PUMP, 8.5 GPM CHILLED WATER FLOW, S/N: 64862 [LOCATED IN RONKONKOMA, NY] ...[more]

40" X 40" MAXIMUM SECTION VOLUME, 40' RANGE OF SECTION LENGTHS, 1'-1/4" MAXIMUM DRILLING THINKNESS, 65 FPM POSITIONING SPEED, 1-1/4" MAXIMUM DRILL...

[4] SHOP FANS [LOCATED AT 280 HARTFORD AVENUE, NEWINGTON, CT] ...[more]

[2] PALLETS OF [8] DRUMS OF NEW CIMCOOL COOLANT [LOCATED AT 280 HARTFORD AVENUE, NEWINGTON, CT] ...[more]

STEEL STOCK RACK [LOCATED AT 280 HARTFORD AVENUE, NEWINGTON, CT] ...[more]

[4] WOOD TOP SHOP BENCHES WITH ELECTRIC BUFFING JACKS [LOCATED AT 280 HARTFORD AVENUE, NEWINGTON, CT] ...[more]

LOT OF ASSORTED 2-DOOR STEEL CABINETS, SHELVING, ASSORTED SHOP BENCHES [LOCATED AT 280 HARTFORD AVENUE, NEWINGTON, CT] ...[more]

P&H 3000# CAPACITY ELECTRIC HOIST, WITH BRIDGE PENDANT CONTROLS [LOCATED AT 280 HARTFORD AVENUE, NEWINGTON, CT] ...[more]

[6] SHOP CARTS [LOCATED AT 280 HARTFORD AVENUE, NEWINGTON, CT] ...[more]

APPROXIMATELY [20] SHOP STOOLS [LOCATED AT 280 HARTFORD AVENUE, NEWINGTON, CT] ...[more]

ELECTRICAL BUSS DUCT & TAPS [LOCATED AT 280 HARTFORD AVENUE, NEWINGTON, CT] ...[more]

PREMIER 1-1/2 TON CHAIN FALL [LOCATED AT 280 HARTFORD AVENUE, NEWINGTON, CT] ...[more]

GRANITE TABLE ON BASE [LOCATED AT 280 HARTFORD AVENUE, NEWINGTON, CT] ...[more]

MATSUURA MDL. MC-800V CNC VERTICAL MACHINING CENTER, 16.14" X 45.27" TABLE, BT40 TAPER SPINDLE, 30-POSITION AUTOMATIC TOOL CHANGER, MATSUURA SYSTE...

MATSUURA MDL. MC-1000VS2 CNC VERTICAL MACHINING CENTER, 19.7" X 47.2" TABLE, BT40 TAPER SPINDLE, 30-POSITION AUTOMATIC TOOL CHANGER, OILMATIC CHIL...

MATSUURA MDL. MC-760V-DC CNC VERTICAL MACHINING CENTER, DUAL SPINDLE, BT40 TAPER SPINDLE, 16.1" X 45.3" TABLE, 24-POSITION AUTOMATIC TOOL CHANGER,...

MATSUURA MDL. MC560V CNC VERTICAL MACHINING CENTER, 34" X 14.96" TABLE, BT40 TAPER SPINDLE, 20-POSITION AUTOMATIC TOOL CHANGER, DAKIN OIL CHILLER,...

MATSUURA MDL. MC-760VZ CNC VERTICAL MACHINING CENTER, 16.1" X 45.3" TABLE, BT40 TAPER SPINDLE, 30-POSITION AUTOMATIC TOOL CHANGER, DAKIN AKS 3 OIL...

LNS HYDROBAR HYDRAULIC BAR FEED [LOCATED AT 280 HARTFORD AVENUE, NEWINGTON, CT] ...[more]

LNS HYDROBAR HYDRAULIC BAR FEED [LOCATED AT 280 HARTFORD AVENUE, NEWINGTON, CT] ...[more]

OKUMA MDL. MX-45VAE VERTICAL MACHINING CENTER WITH 18.11" X 39-1/2" TABLE, TRAVELS: X-30, Y-18.11", Z-17.71", 20 POSITION AUTOMATIC TOOL CHANGER, ...

OKUMA MDL. MX-45VAE VERTICAL MACHINING CENTER WITH 18.11" X 39-1/2" TABLE, TRAVELS: X-30, Y-18.11", Z-17.72", 20 POSITION AUTOMATIC TOOL CHANGER, ...

OKK MDL. V1 VERTICAL MACHINING CENTER, WITH 16" X 19-1/2" DUAL PALLETS, 20-POSITION AUTOMATIC TOOL CHANGER, CAT #40 SPINDLE TAPER, FANUC 21i-M CON...

MATSUURA MDL. MC800V VERTICAL MACHINING CENTER WITH 18" X 46" TABLE, BT-40 TAPER, 30-POSITION AUTOMATIC TOOL CHANGER, TORIT DRYFLO MIST COLLECTOR,...

MATSUURA TOOL PRE-SETTER [LOCATED IN BELLPORT, NY] ...[more]

30 TON AMADA MDL. 345NCT CNC TURRET PUNCH, 44-STATION TURRET, [2] AUTO INDEXING STATIONS, FANUC P6M CONTROLS, S/N: AK45007 [LOCATED IN BELLPORT, N...

LIBERTY SYSTEMS NITROGEN GENERATOR MDL. GEN2-2110, 87-145 PSIG, S/N: 16-0502-01 (NEW 2016) [LOCATED IN BELLPORT, NY] ...[more]

C.I. HAYES 6" TYPE LAC ELECTRIC BELT FURNACE, 21KW, DART ACCU-SET VARI SPEED CONVEYOR, NITROGEN, HONEYWELL DIGITAL TEMPERATURE CONTROLS, 2100 DEGR...

C.I. HAYES 6" TYPE LACMB ELECTRIC BELT FURNACE, 21KW, DARTMICRO DRIVE VARI SPEED CONVEYOR, WATLOW DIGITAL TEMPERATURE CONTROLS, 2100 DEGREE MAXIMU...

9" LINDBERG TYPE 852-A9-BG-C4-D-E3 BELT FURNACE, 49KW, 4-ZONE, VARI-SPEED BELT CONTROL, 1100 DEGREES MAXIMUM TEMPERATURE, S/N: 909707-M7 [LOCATED ...

BROWN & SHARPE "GAGE 2000" COORDINATE MEASURING MACHINE WITH 22" X 29" DRILLED & TAPPED GRANITE TABLE, APPROXIMATELY 18" Z-AXIS, 500LB CAPACITY, S...

36" TIMESAVER MDL. 137-1 HDMW BELT SANDER/GRINDER, WET-TYPE, AIR KNIFE, VARI-SPEED BELT DRIVE, S/N: 24883 [LOCATED IN BELLPORT, NY] ...[more]

SULLAIR MDL. 3709VBAC S-ENERGY 3700 ROTARY SCREW TYPE AIR COMPRESSOR, 125 PSI, WS TOUCH CONTROLLER, VARIABLE SPEED DRIVE, S/N: 200151009008 [LOCAT...

DEMAG MDL. DR110 CRANE, 10 TON CAPACITY, 23" APPROXIMATE LIFT, 2-SPEED LIFT, 66" TROLLEY GAGE,  [LOCATED IN LOUISVILLE, KY] ...[more]

BARBER COLMAN MDL. 2-1/2-4 GEAR HOBBER, S/N: 202 [LOCATED IN COPIAGUE, NY] ...[more]

BARBER COLMAN MDL. 2-1/2-4 GEAR HOBBER, S/N: 89 [LOCATED IN COPIAGUE, NY] ...[more]

BROTHER MDL. TC-211 CNC DRILLING AND TAPPING MACHINE, 10-POSITION TURRET, S/N: 111765 [LOCATED IN COPIAGUE, NY] ...[more]

6" X 12" BOYAR SCHULTZ HAND FEED SURFACE GRINDER, ELECTRO-MATIC RECTIFIER, MAGNA-LOCK, ELECTROMAGNETIC CHUCK, S/N: N/A [LOCATED IN COPIAGUE, NY] ...

FELLOWS #7 HIGH SPEED GEAR SHAPER, S/N: N/A [LOCATED IN COPIAGUE, NY] ...[more]

GARDNER MDL. 2H20-23 DOUBLE DISC OPPOSED GRINDER, APPROXIMATELY 23" DIAMETER WHEELS, 20HP, S/N: 425-1 [LOCATED IN COPIAGUE, NY] ...[more]

GRINDING WHEELS FOR GARDNER DOUBLE DISC GRINDER - NEW [LOCATED IN COPIAGUE, NY] ...[more]

GLEASON "CONFLEX" GRINDER, S/N: 28677 [LOCATED IN COPIAGUE, NY] ...[more]

TRAUB A42 SINGLE SPINDLE SWISS SCREW MACHINE, CUT-OFFS, BAR FEED, S/N: A42/5720 [LOCATED IN COPIAGUE, NY] ...[more]

TRAUB TB60 SINGLE SPINDLE SWISS SCREW MACHINE, CUT-OFFS, BAR FEED, S/N: 3664 [LOCATED IN COPIAGUE, NY] ...[more]

WAHLI MDL. 90 GEAR HOBBER, S/N: 1008 [LOCATED IN COPIAGUE, NY] ...[more]

15" WALKER TURNER 5-SPINDLE PRODUCTION GANG DRILL, NOTE: GREEN BENCH DRILL NOT INDLUDED [LOCATED IN COPIAGUE, NY] ...[more]

FELKER 80-BQ WET-SAW VISE [LOCATED IN COPIAGUE, NY] ...[more]

AMADA MDL. RG100S 8' PRESS BRAKE, AMADA CONTROL, 100 TON CAPACITY, LASER PRESS BRAKE GUARD, S/N: 102607 (1984) [LOCATED IN PLYMPTON, MA] ...[more]

AMADA MDL. VIPROS 358 KING II CNC TURRET PUNCH, FANUC SERIES 18-P CNC CONTROL, 30 TON CAPACITY, 58-STATION TURRET, S/N: 35840378 (2000), WITH AMAD...

UNITRON MDL. 7758 MICROSCOPE WITH MICROCODE DIGITAL READOUT [LOCATED AT 2455 SOUTH ROAD (ROUTE 9), POUGHKEEPSIE, NY] ...[more]

12" MITUTOYO MDL. PJ311 OPTICAL COMPARATOR WITH QUADRA-CHEK III, 9-1/2" X 11-3/4" TABLE, OPTOEYE-ML, S/N: 70312 [LOCATED AT 2455 SOUTH ROAD (ROUTE...

CROWN MDL. 20WTL, 2000# CAPACITY ELECTRIC WALK BEHIND LIFT, 24 VOLT, 154" REACH, S/N: W-10370, AND CHARGER [LOCATED AT 130 SALT POINT TURNPIKE, PO...

40 HP SULLAIR ROTARY SCREW AIR COMPRESSOR, S/N: 003-106215 [LOCATED AT 130 SALT POINT TURNPIKE, POUGHKEEPSIE, NY] ...[more]

KALTENBACH NON-FERROUS COLD MITRE SAW [LOCATED AT 130 SALT POINT TURNPIKE, POUGHKEEPSIE, NY] ...[more]

KRAMER MDL. E-300 VIBRATORY FINISHER, 27-1/2" X 9-1/2" X 10" DEEP, S/N: 6161 [LOCATED AT 130 SALT POINT TURNPIKE, POUGHKEEPSIE, NY] ...[more]

SIP ROTOPTIC-1 ROTARY TABLE WITH OPTICS, S/N: 282 [LOCATED AT 14 ST. NICHOLAS ROAD, WAPPINGER FALLS, NY] ...[more]

HAAS Servo 300 Model 48A Bar Feed, 3/8"-3-1/8" Capacity, Up to 48" Length, 650 LBS Maximum Bar Weight, S/N: 93381 (2011) (Only a Few Hours of Oper...

Avey No. 5 27" Type BMA-6 Heavy Duty Drill Press, 24-1/2" x 22" Table Hand Crank Elevation, 6-Speed, 150-1200 RPM, S/N: 30406 (Located in poughkee...