Refine your search

Estimate

Filter by Price Range

Primary Category

Category

Brand

Item Type

State/Province

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
There are 34 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

2011 Mori Seiki NZ1500 T2Y2 Serial Number NZ150KC0200, CNC Lathe, LNS 6’ Barfeeder, High Pressure Coolant, Dual 6” Spindles, Upper/Lower 16 Positi...

Fryer MC-10 Serial Number 10392, CNC Vertical Machining Center, 32” X 17” X 19” X,Y,Z Travels, 8,000 RPM, Cat 40 Taper, 20 Position Tool Changer, ...

Fryer MC-10 Serial Number 10398, CNC Vertical Machining Center, 32” X 17” X 19” X,Y,Z Travels, 8,000 RPM, Cat 40 Taper, 20 Position Tool Changer, ...

Acer Knee Mill, Bed: 10 x 54”, Travel: 31.5 x 20 x 20.87, Spindle HP: 5, Taper: NMTB40, Voltage: 208-230, Weight capacity: 1320lbs, Machine dims: ...

4 Sided Tombstone 630MM Drilled and Tapped Location: Scottsdale, AZ 85260 Local Shipping Company: Onsite Coordinator Aaron Levine 480-371-9009

Mori Seiki SL-400/403 Boring Bar Holders Location: Scottsdale, AZ 85260 Local Shipping Company: Onsite Coordinator Aaron Levine 480-371-9009

2004 Clausing Alpha 1400S CNC Lathe, 7 5/8” Height of centers, 50” Distance between centers, 15 ¾” Swing over bed, 23” Swing in gap, 6 ½” Gap wit...

2018 Systematic Automation Flame Treater, 8 Station Indexer, 10" Burner Length Location: Phoenix, AZ 85024 Local Rigger: Onsite Coordinator Aar...

2014 Tsudakoma TN-320, Rotary Table, 12.6" Table Diameter, 14" Table Height at 0 Degree, Fanuc Alpha 8i Servo Motor, 4000 RPM, Configured for Haa...

2014 Fanuc M1iA/0.5S Serial Number E14X32844 Axes 4, Payload 1 Kg, H-Reach 280 mm, Repeatability ±0.0200mm, Robot Mass 14 Kg, Robot Motion Speed J...

2015 Fanuc M1iA/0.5S Serial Number E15430970 Axes 4, Payload 1 Kg, H-Reach 280 mm, Repeatability ±0.0200mm, Robot Mass 14 Kg, Robot Motion Speed J...

Mori Seiki SL-400/403 Boring Bar Holders Location: Scottsdale, AZ 85260 Local Shipping Company: Onsite Coordinator Aaron Levine 480-371-9009

Leesona Chill Roll Stack, Width 40", Diameter of Rolls 12", Power Requirement 480/3/60, EQUIPPED WITH Chain Driven, Manual Adjustment for Rolls, P...

2009 Thermalcare LQ2W2504, Tonnage 26.2 Tons, Water Cooled Chiller, Electrical Requirements 460V - 3 - 60hz, Set Point Range 20 - 80 F, Refriger...

Okamoto ACC-820-EX Surface Grinder, S/N 72031, 8" x 20" CNC Automatic Surface Grinder, Max Wheel Size (O.D. x Width) 10" x 1", Max Surface Speed: ...

WTO Adjustable Angle Drill/Milling Unit for Mori Seiki Sl-400MC/403MC Location: Scottsdale, AZ 85260 Local Shipping Company: Onsite Coordinator...

SMW SLU-X-3-ZS Hydraulic Steady Rest Location: Scottsdale, AZ 85260 Local Shipping Company: Onsite Coordinator Aaron Levine 480-371-9009

Boring Bars 1.5" Shank X ( 2ea. 10", 1 ea. 18", 1 ea. 22") Length with One ea. Boring Bar Sleeve Included Location: Scottsdale, AZ 85260 Local ...

2019 Belco ST2210 Heat Shrink Wrapper, Conveyor Height 32.5 to 36 in, Tunnel Dim. (W) 22 in, Tunnel Dim. (L) 48 in, Tunnel Dim. (H) 10 in, Shippin...

2011 Trak TRL 1630SX, CNC Toolroom Lathe, Proto Trak SLX Control, 8" Height of Centers, 30" Distance Between Centers, 16" Swing Over Bed, 8.6" Swi...

1996 Plastic Extrusion Machinery 325, Extrusion Puller, Horsepower 30, Control DC Tach Feedback Control Using Focus II or Equivalent, Speed Range ...

1996 Plastic Extrusion Machinery 1540100, Extrusion Puller, Stroke 1.5" - 3", Shut Height 8" - 10", Extrusion Line Speed 180' / minute, Air Consum...

1994 Jomar 135E, Screw Size 3", L/D Ratio 25:1, Horsepower 125, Parison Clamp Tonnage 135.4 Tons @ 2,850 PSI, Blow Clamp Tonnage 28 Tons @ 2,850 P...

Quincy QMA125ATA31E Rotary Screw Air Compressor, 125 HP, 480/3/60 Power Requirement, 132" x 74" x 65" Approx Dimensions, 5,000 Lbs Approx Weight, ...

Gorbal 2 Ton Hoist, Gorbel 4000 frame , Reach is 10’-6 ½” x 19’-7 ½”, Coffing JLC4008 2-Ton hoist Location Wentzville, MO 63385 Local Shipping Com...

Loading...Loading...
  • Lots per page
  • 60
  • 120
  • 240

Recently Viewed Lots