{ Choice of lots: 59, 60, 61, 62, 63 } Phoenix Electrode Stabilizing Oven Model 9 Dry Rod Oven

{ Choice of lots: 59, 60, 61, 62, 63 } Phoenix Model 12 Dry Rod Oven, S/N NA

{ Choice of lots: 59, 60, 61, 62, 63 } Phoenix Electrode Stabilizing Oven Model 1 Dry Rod Oven, 300 FH AVG

{ Choice of lots: 59, 60, 61, 62, 63 } Phoenix Electrode Stabilizing Oven Model 1 Dry Rod Oven, 300 FH AVG

{ Choice of lots: 64, 65 } Keen Dry Rod Oven Model KT-15, 120/240 V, 70 W, 1 PH, S/N 1215931

{ Choice of lots: 64, 65 } Keen Dry Rod Oven Model KT-15, 120/240 V, 70 W, 1 PH, S/N 1215932

{ Choice of lots: 66 } Keen Oven Model KF-300, S/N 5133W, 480V 3 PH 1000 W

{ Choice of lots: 67, 68 } 24" x 36" Starrett Granite Calibration Block, on stand, S/N NA

{ Choice of lots: 67, 68 } 24" x 36" Granite Calibration Block, on stand, S/N NA

No. 2-M Cincinnati Vertical Knee Mill with Bridgeport 6841 Head, 11" x 54" table, 80 - 2720 rpm spindle speeds, 5" spindle travel, S/N 115019

{ Choice of lots: 70 } Takam Model 949 Vertical Knee Mill, new 1993, 9" x 48" table, 70 - 3000 rpm spindle speeds, 5" spindle travel, +/-90 deg. ...

L5 x 5 x 3/8" Buffalo Mechanical Angle Roll, S/N NA

1/4" x 6' Plate Roll, S/N NA

3/4" x 8' Bertch Plate Roll, S/N NA ...[more]

Manual Plate Roll 18" Max

225 Ton Cincinatti Mechanical Press Brake, S/N NA, 12 ft o/a, 129" between housing

400 Ton Pacific Hydraulic Press Brake, 120" overall, 104" between housings, 24" horn on left. S/N NA

3' 9" Carlton Radial Arm Drill, S/N NA

5' 17" Carlton Radial Arm Drill, S/N 339859 ...[more]

Carlton Radial Arm Drill, S/N N/A, table 22" x 18" x 12" - 20" tall

LeBlond 24" Regal Hollow Spindle Engine Lathe with 9" Spindle Bore, 6 - 400 rpm spindle speeds, 9" spindle bore, 3-jaw rear chuck, 4-jaw front chu...

Summit 17-3X80 Engine Lathe, 22 - 1500 rpm spindle speeds, 3-jaw chuck, 4-way tool S/N 4811

36" Bullard Spiral Drive Vertical Turret Lathe, S/N 171-1393 ...[more]

42" Bullard Spiral Drive Vertical Turret Lathe, S/N 20672

Bullard Tooling: in cabinet and shelves

Parts Machine: Summit 19x80 S/N 3513

Enmet Model ISA-34RAL, Part 03470-000, S/N 5371

Pentax Auto Level AL220, Magnifiction 22X, Range Home Circle Dia 94mm

Dillon Dynamometer, Cap. 50000 pounds, 250 pound division, S/N AN60685

Milwaukee Heavy Duty Rotary Hammer

Topcon Tripod with 0-6' Scale

New Age Hardness Tester

Step Block

Ultra Sonic Thickness Gauge Model MX-2, S/N 15395

Heath Ultraline II Shape Cutter

{ Choice of lots: 93, 94, 95 } Lot of 5: Gauges with stand, calibration certificate

{ Choice of lots: 93, 94, 95 } Lot of 8: Gauges with stand, calibration certificate

{ Choice of lots: 93, 94, 95 } Lot of 9: Gauges with calibration certificate

Lot of 2: Electric Grinders; (1) Dewalt, (1) Rigid

Lot: Gaskets - asst size, new and used

Milwaukee Heavy Duty Magnetic Drill, Cat. No. 42971, S/N 505B6030084

Rockwell Horiz. Electric Grinder Model 760, S/N 35521

Heavy Duty Air Chisel with tools

Magnetic Drill, 2 Speed, 12 amps max

{ Group of lots: 102, 103 } Lot of 2: Burner Pipe, Custom

{ Group of lots: 102, 103 } Lot of 4: Sledge Hammers

Ridgid Air Mover on Pedestal - 3 speed, 2500 Max CFM

Lot: C Clamps

Lot: Torches

Vise: 5" wide x 6" opening ...[more]

Lot: Cutters

Lot: Sprockets - asst sizes ...[more]

Lot: Heavy Duty Wrenches, Pipe Wrenches

Lot of Liquid Cleaners: Wedac Rust Remover, Weld-Aid Anti-Splatter, PPG Cleaner

Lot of 3: Worthington Compressor Fluids, Part TS-1

Enerpac Hydraulic System, cat no. 11581100, C6K17FZ18A, HP 1.5, RPM 1725

{ Choice of lots: 114, 115 (P) } Welding Manipulator w/ Miller Dimension 1000 Welder (red dome base) oad 18 ft tall, 22 ft arm, 14 ft under boom,...

{ Choice of lots: 114, 115 (P) } Welding Manipulator w/Lincoln Ideal Arc 1000) oad 20 ft tall, 21 ft arm; 16 ft. under the arm, 14 ft in/out trav...

Welding Manipulator no power source (red dome base), oad 18 ft tall x 19 ft arm; 9 ft vertical travel with 13 ft max under boom, flux hopper, NA3...

{ Choice of lots: 117 } 10’ x 10’ Bowers Model M10 Welding Manipulator