0G
Lot
0G
You are about to place a bid of CAD
Timed Auction:Current bid:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
We have noticed that your maximum bid is higher or equal to the buy it now price for this lot.
Would you like to discard your maximum bid and proceed with the buy it now option?
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer (905-669-8893)
Choose one of the quick bid options below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
To place a bid select the minimum amount below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
BROCK/FLYING DUTCHMAN 8 UNIT INDOOR BULK MATERIAL STORAGE AND HANDLING SYSTEM with (8) BROCK Corrugated Steel Storage Silos/Bins with Heavy-Duty Support Frames, Cone-Bottom Discharge, FLYING DUTCHMAN Unloaders, 7,000 lbs. max system cap., Valve/Discharge Assemblies, Controls, previously used for LDPE (Low Density Polyethylene)
For Cross Border Logistics, Customs Brokerage, Trucking, Transportation & Exporting Services, Please Contact:
JMD Customs Brokers Inc.
260 Export Blvd.
Mississauga, ON
L5S 1Y9
Phone: Ajay 416-823-4871 / Ekta 416-854-4876
Email: aj@jmdcustoms.com / Ekta@jmdcorporation.com
Auction Date & Time: lots start Closing: Wed. 09/09/2026 11:00 am
Location: 250 Baseline Rd E, Bowmanville, ON L1C 1A4
Inspection: Tuesday September 8th, 9AM - 4PM or By Appointment
19% Buyers Premium applies on all online purchases.
Featuring:
POLYBOARD EXTRUSION, ROLLING, COOLING, FORMING & CUTTING LINE
POLYBOARD / RECYCLED PLASTIC BOARD PRODUCTION LINE with Extruder, Roll/Calender Forming Section, Polished/Chrome Rolls, Multiple Driven Roll Stands, Cooling Bath / Water Cooling Sections, Pull-Roll / Haul-Off Assemblies, Side Trim Saws, End Cut Saw, Pneumatic and Hydraulic Components, E-Z Automation HMI, Baldor DC Drive, Advantage Sentra Temp. Units, Pumps, Motors, Gearboxes, Stacking/Pallet Handling Components Etc.
LDPE / PLASTIC SIZE REDUCTION AND PELLETIZING COMPLETE LINE
RETECH HEAVY-DUTY SHREDDER, ROTOGRAN R00360 HD INDUSTRIAL GRANULATOR (250 HP), CPM / CALIFORNIA PELLET MILL SERIES 7900-8 PELLETIZING LINE WITH CPM SERIES CC COUNTERFLOW COOLER, Feed/Conditioning Section, Conveyors, Controls, Platform, Spare Screens/Perforated Sections, Related System Components. Currently Installed For Plastic/LDPE Material Processing. To Be Offered as a Complete System And Piecemeal (Pellet Mill, Granulator, Shedder Listed Below)
PELLET MILL
CALIFORNIA PELLET MILL/CPM SERIES 7900-8 PELLET MILL, Approx. 30" Die I.D. X 8" Die Width, Die/Roll Assembly, Top Feed/Conditioning Section, Related Feed Conveyor, Discharge Hopper, Operator Platform, CPM Series CC Counterflow Cooler 1400 X 1400 With Up To 10 Metric Tons Cooling Capacity, STEARNS Spring Set Disc Brake, Rotary Valve, Fan/Discharge Components, Spare Screens & Parts S/N NH-398564
HEAVY DUTY GRANULATOR
ROTOGRAN R00360 HD HEAVY DUTY GRANULATOR 250 HP Motor, Top Feed Hopper, Throughput Approx. 8,000 Lbs/Hr with ¾” Hole diameter Screen, s/n MT3360HD9701102
HEAVY DUTY SHREDDER
RETECH INDUSTRIES HEAVY-DUTY INDUSTRIAL SHREDDER, large capacity with oversized feed hopper, powered feed/conveyor section, infeed/discharge conveyors and related system components
NEW SPARE
2025 NORD MAXXDRIVE SK 7207ABH INDUSTRIAL GEAR REDUCER / GEARBOX, 14.20 ratio, 75,237 lb-in torque rating, 123 r/min output speed, approx. 950 lb, hollow shaft, palletized spare/replacement unit
INDOOR BULK SILO SYSTEM
BROCK/FLYING DUTCHMAN 8 UNIT INDOOR BULK MATERIAL STORAGE AND HANDLING SYSTEM with (8) BROCK Corrugated Steel Storage Silos/Bins with Heavy-Duty Support Frames, Cone-Bottom Discharge, FLYING DUTCHMAN Unloaders, 7,000 lbs. max system cap., Valve/Discharge Assemblies, Controls, previously used for LDPE (Low Density Polyethylene)
FORKLIFTS
2024 TOYOTA 50-8FGCU30 LPG Forklift, 5,120 lbs. capacity, FSV mast, side shift, 187" max. height, solid cushion tires, approx. 202.8 (very low hours), equipped with forks s/n 16587
2024 TOYOTA 50-8FGCU25 LPG Tire Forklift with Clamp attachment, 5,000 lb capacity, FSV mast, 189" maximum lift height, solid cushion tires, approx. 298.4 (very low hours) s/n 27165
FACTORY SUPPORT
2019 KAESER SK 20 20 HP Rotary Screw Air Compressor, 125 PSIG, 88 CFM, 575V/3PH, Sigma controller, only 5,472 run hours / 1,681 load hours showing s/n 1039-7132852
2020 ICS SYSTEMS SHA-40-RO Chiller, 575V, 63.1 amps, 3PH, 60Hz, with control panel, compressor/chiller skid mount s/n 0595-1595-A
Also: Spare parts, Gould Pumps, Motors, Heat Exchangers, Transformers, Welders, Dumping Bins, Wood Pallets, Nissan and Toyota Forklifts, Pallet Racking etc.
=================================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either E-Transfer, Wire Transfer, Cash or Certified Cheque. Visa & Mastercard payments can be taken on invoices up to $2,000 and will be subject to a 3% administrative fee.
Payment is due by: TBD
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Removal deadline: TBD
Site Supervisor: TBD
Accounting: Victoria 905-669-8893 Ext. 207, vwhitman@infinityassets.com
Banking Information (Wire Transfers):
CANADIAN WIRE TRANSFER INSTRUCTIONS
Beneficiary Bank: ROYAL BANK OF CANADA
3300 HIGHWAY #7
CONCORD, ONTARIO
Beneficiary Customer:
INFINITY ASSET SOLUTIONS INC.
ACCOUNT #: 1007137
TRANSIT #: 00192
BANK #: 003
SWIFT # ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ABA#: 021000021
IBAN #: 003401028600192
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
- Credit Card Currency and Payment Processing: All Credit Card payments to Infinity Asset Solutions Inc. are processed through the Auctioneer’s Canadian merchant banking facilities and may be settled in Canadian Dollars (CAD) regardless of the currency referenced in the auction listing, invoice, or asset location. Any currency conversion, foreign exchange charges, international transaction fees, or related costs imposed by a purchaser’s bank, credit card issuer, or payment provider are the sole responsibility of the purchaser and are not refundable.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
BROCK/FLYING DUTCHMAN 8 UNIT INDOOR BULK MATERIAL STORAGE AND HANDLING SYSTEM with (8) BROCK Corrugated Steel Storage Silos/Bins with Heavy-Duty Support Frames, Cone-Bottom Discharge, FLYING DUTCHMAN Unloaders, 7,000 lbs. max system cap., Valve/Discharge Assemblies, Controls, previously used for LDPE (Low Density Polyethylene)
For Cross Border Logistics, Customs Brokerage, Trucking, Transportation & Exporting Services, Please Contact:
JMD Customs Brokers Inc.
260 Export Blvd.
Mississauga, ON
L5S 1Y9
Phone: Ajay 416-823-4871 / Ekta 416-854-4876
Email: aj@jmdcustoms.com / Ekta@jmdcorporation.com
Auction Date & Time: lots start Closing: Wed. 09/09/2026 11:00 am
Location: 250 Baseline Rd E, Bowmanville, ON L1C 1A4
Inspection: Tuesday September 8th, 9AM - 4PM or By Appointment
19% Buyers Premium applies on all online purchases.
Featuring:
POLYBOARD EXTRUSION, ROLLING, COOLING, FORMING & CUTTING LINE
POLYBOARD / RECYCLED PLASTIC BOARD PRODUCTION LINE with Extruder, Roll/Calender Forming Section, Polished/Chrome Rolls, Multiple Driven Roll Stands, Cooling Bath / Water Cooling Sections, Pull-Roll / Haul-Off Assemblies, Side Trim Saws, End Cut Saw, Pneumatic and Hydraulic Components, E-Z Automation HMI, Baldor DC Drive, Advantage Sentra Temp. Units, Pumps, Motors, Gearboxes, Stacking/Pallet Handling Components Etc.
LDPE / PLASTIC SIZE REDUCTION AND PELLETIZING COMPLETE LINE
RETECH HEAVY-DUTY SHREDDER, ROTOGRAN R00360 HD INDUSTRIAL GRANULATOR (250 HP), CPM / CALIFORNIA PELLET MILL SERIES 7900-8 PELLETIZING LINE WITH CPM SERIES CC COUNTERFLOW COOLER, Feed/Conditioning Section, Conveyors, Controls, Platform, Spare Screens/Perforated Sections, Related System Components. Currently Installed For Plastic/LDPE Material Processing. To Be Offered as a Complete System And Piecemeal (Pellet Mill, Granulator, Shedder Listed Below)
PELLET MILL
CALIFORNIA PELLET MILL/CPM SERIES 7900-8 PELLET MILL, Approx. 30" Die I.D. X 8" Die Width, Die/Roll Assembly, Top Feed/Conditioning Section, Related Feed Conveyor, Discharge Hopper, Operator Platform, CPM Series CC Counterflow Cooler 1400 X 1400 With Up To 10 Metric Tons Cooling Capacity, STEARNS Spring Set Disc Brake, Rotary Valve, Fan/Discharge Components, Spare Screens & Parts S/N NH-398564
HEAVY DUTY GRANULATOR
ROTOGRAN R00360 HD HEAVY DUTY GRANULATOR 250 HP Motor, Top Feed Hopper, Throughput Approx. 8,000 Lbs/Hr with ¾” Hole diameter Screen, s/n MT3360HD9701102
HEAVY DUTY SHREDDER
RETECH INDUSTRIES HEAVY-DUTY INDUSTRIAL SHREDDER, large capacity with oversized feed hopper, powered feed/conveyor section, infeed/discharge conveyors and related system components
NEW SPARE
2025 NORD MAXXDRIVE SK 7207ABH INDUSTRIAL GEAR REDUCER / GEARBOX, 14.20 ratio, 75,237 lb-in torque rating, 123 r/min output speed, approx. 950 lb, hollow shaft, palletized spare/replacement unit
INDOOR BULK SILO SYSTEM
BROCK/FLYING DUTCHMAN 8 UNIT INDOOR BULK MATERIAL STORAGE AND HANDLING SYSTEM with (8) BROCK Corrugated Steel Storage Silos/Bins with Heavy-Duty Support Frames, Cone-Bottom Discharge, FLYING DUTCHMAN Unloaders, 7,000 lbs. max system cap., Valve/Discharge Assemblies, Controls, previously used for LDPE (Low Density Polyethylene)
FORKLIFTS
2024 TOYOTA 50-8FGCU30 LPG Forklift, 5,120 lbs. capacity, FSV mast, side shift, 187" max. height, solid cushion tires, approx. 202.8 (very low hours), equipped with forks s/n 16587
2024 TOYOTA 50-8FGCU25 LPG Tire Forklift with Clamp attachment, 5,000 lb capacity, FSV mast, 189" maximum lift height, solid cushion tires, approx. 298.4 (very low hours) s/n 27165
FACTORY SUPPORT
2019 KAESER SK 20 20 HP Rotary Screw Air Compressor, 125 PSIG, 88 CFM, 575V/3PH, Sigma controller, only 5,472 run hours / 1,681 load hours showing s/n 1039-7132852
2020 ICS SYSTEMS SHA-40-RO Chiller, 575V, 63.1 amps, 3PH, 60Hz, with control panel, compressor/chiller skid mount s/n 0595-1595-A
Also: Spare parts, Gould Pumps, Motors, Heat Exchangers, Transformers, Welders, Dumping Bins, Wood Pallets, Nissan and Toyota Forklifts, Pallet Racking etc.
=================================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either E-Transfer, Wire Transfer, Cash or Certified Cheque. Visa & Mastercard payments can be taken on invoices up to $2,000 and will be subject to a 3% administrative fee.
Payment is due by: TBD
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Removal deadline: TBD
Site Supervisor: TBD
Accounting: Victoria 905-669-8893 Ext. 207, vwhitman@infinityassets.com
Banking Information (Wire Transfers):
CANADIAN WIRE TRANSFER INSTRUCTIONS
Beneficiary Bank: ROYAL BANK OF CANADA
3300 HIGHWAY #7
CONCORD, ONTARIO
Beneficiary Customer:
INFINITY ASSET SOLUTIONS INC.
ACCOUNT #: 1007137
TRANSIT #: 00192
BANK #: 003
SWIFT # ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ABA#: 021000021
IBAN #: 003401028600192
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
- Credit Card Currency and Payment Processing: All Credit Card payments to Infinity Asset Solutions Inc. are processed through the Auctioneer’s Canadian merchant banking facilities and may be settled in Canadian Dollars (CAD) regardless of the currency referenced in the auction listing, invoice, or asset location. Any currency conversion, foreign exchange charges, international transaction fees, or related costs imposed by a purchaser’s bank, credit card issuer, or payment provider are the sole responsibility of the purchaser and are not refundable.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Catalog
Tags: Material Handling Attachment, Bin, Material Storage