Synergy Stamping Inc.
Date & Time: Lots starts closing on Thursday, May 30, 2019 at 11:00 am EDT
Inspection Date: Wednesday May 29th, 9AM - 4PM or By Appointment
18% Buyers Premium applies on all online purchases.
A $2000 refundable security deposit is required upon online registration. See Terms & Conditions Below.
2003 TRUMPF Trumatic 2010R CNC Turret Punch, 20 Ton Capacity, Sheet Size 100" X 50", 12-Station Turret, CNC Control, s/n 90951/A0030A0098
TRUMPF Trumatic 2000R CNC Turret Punch, 20 Ton Capacity, Table Travel 50" X 50", 9-Station Turret, CNC Control, s/n 9110/7000093
Qty. of Assorted Trumatic Tooling and Punching Heads
2017 ERMAK Power-Bend Falcon 8.53x110 CNC Hydraulic Press Brake, 110 Ton x 100" Capacity, CNC Crowning, Delem Model DA-58T CNC Controller, s/n 20899-C5L6C6 C/W Fiessler Safety Curtains
2014 ERMAK Power Falcon 7x66 CNC Hydraulic Press Brake, 66 Ton x 84" Capacity, CNC Crowning, Ermak DNC 600S CNC Controller, s/n 19508-S8TOH5 C/W Fiessler Safety Curtains
2013 ERMAK Power-Bend Pro 8.5x66 CNC Hydraulic Press Brake, 66 Ton x 108" Capacity, Manual Crowning, Ermak DNC 600S CNC Controller, s/n 11138-RN13DP C/W Fiessler Safety Curtains
2012 ERMAK Power-Bend 7x44 CNC Hydraulic Press Brake, 44 Ton x 82" Capacity, Ermak DNC 600S CNC Controller, s/n 04241-F3ZF2Y C/W Fiessler Safety Curtains
2006 HACO PPEC Press Brake, 35 Ton x 4' Capacity, ATS 560 CNC Controller, s/n 352511800
ALLSTEEL 20-4 Hydraulic Press Brake, 20 Ton x 4' Capacity, s/n 202
Asst. Press Brake Dies & Tooling
2014 ERMAK GMR 4.5-1/8” Hydraulic Shear, Programmable Back Gauge, s/n 51566-94EF90, 34 Pcs/min
Presses, Feeders, Straighteners, Uncoilers
BROWN BOGGS 17½J Punch Press, 60 Ton Capacity c/w 18" Feeder w/ Waddington Controller, Variable Speed Straightener, VOGEL 2518 Uncoiler, 2,500lb Capacity, Triad Safety Curtains
BROWN BOGGS 16LW Punch Press, 50 Ton Capacity, s/n 56165 C/W Waddington 12" Automatic Feeder, Straightener w/ Leeson Variable Speed Control, VOGELUncoiler s/n 0975107
BROWN BOGGS Punch Press, 40 Ton Capacity, s/n 86178 c/w PRF Systems Waddington 8" Automatic Feeder, Straightener w/ Series 92-1 Variable Speed Control, Uncoiler
DANLY 35 Punch Press, 35 Ton Capacity, s/n 3554450166 c/w P.R.F. Waddington 8" Feeder, 8" Straightener, COOPER WEYMOUTH Straightener, LITTELL 25-18 Uncoiler, 2,500lb Capacity
APPLIED AUTOMATION CANADA 4-Post 40-Ton Hydraulic Die Transfer Systems c/w Hydraulic Power Pack (Various Configurations)
Hydraulic Forming Press, Top & Bottom Dies, Power Pack Controller, Transfer Belts
Powered Embossing Forming Press, 12" Capacity, KBMD DC Motor Speed Controller
Qty of Punch Press DIes
2012 CHEVALIER FSG-3S1224AH Automatic Hydraulic Surface Grinder, 12” x 24” Magnetic Chuck, s/n A3893027
2012 CHEVALIER FSG-618M Manual Surface Grinder, 6” x 18” Magnetic Chuck, s/n A3893027
2012 MAGNUM Cut 2V Vertical Milling Machine, 3HP, Mitutoyo 2-Axis DRO, R8, s/n 114143
FIRST Vertical Milling Machine, 2HP
CHIEN YEH STRONG 1500 Engine Lathe, 3 & 4 Jaw Chuck, Quick Change Tool Holder, Mitutoyo 2-Axis DRO, s/n 1022
TCM FCG-36N6 Propane Forklift, 7,400 LB Capacity, 3-Stage Mast, 189" Lift, Outdoor, Non-Marking Tires, s/n A28T00286 (Reading 4,448 HRS)
TCM TFG-2SF9 Propane Forklift, 4,600 LB Capacity, 3-Stage Mast, 189" Lift, Outdoor Tires, s/n A12W02704
2014 SULLAIR 1809E AC Rotary Screw Air Compressor, 23.3KW, 125 PSI, s/n 201407180026
2014 SULLAIR RN100 Air Dryer
DEVILBISS VAV 5061 Piston Type Air Compressor, 15 HP
Qty of Steel Coil Inventory
(2) 2003 TRUMPF Multiset ITM Tool Presetters
2000 SIP PP30 Spot Welder, 30KVA s/n 507226
ARO TECNA S2151 Portable Spot Welder, 15KVA, s/n 507222
2002 FANUC Arcmate 120iB 6-Axis Robot c/w Fanuc System R-J3iB Controller
Custom 4 Roll CNC Forming Line, 60" Capacity, CNC controller
MAS VO32 Radial Drill, 3’ Arm, s/n 739 w/ Box Table
E-R MAIER K 1012 Roll-In Bandsaw
NENOTECH 5530 Bar Sealer c/w Front & Side Bar Sealer, 24" Belt Feed, s/n 20030801
FOX C1 Pallet Wrapper, s/n C1-112309207
LINCOLN ELECTRIC AC-225 Welder
M1 Platform Scale w/DRO
DUSTKOP Dust Collector
CINCINNATI Dual Pedestal Grinder, 1/2 HP
(4) HUSKY Multi Drawer Tool Cabinets c/w Wood Work Surface
(22) Sections Pallet Racking
(3) 5,500 LB Pallet Jacks
Dewalt Chop Saw, Ridgid Shop Vac, Ridgid Portable Table Saw, Steel Banding Cart, Tooling Vises, Benches, Cabinets, Lifting Tables, Power & Hand Tools, Workbenches, Toolboxes and Much More!
Full catalog coming soon. Register now!
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
- Monday – Thursday, 8:00 AM EST – 10:00 PM EST
- Friday, 8:00 AM EST – 6:30 PM EST
Office: (253) 858-6777 Toll Free: (866) 597-2437
Frequently Asked Questions
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less.
Payment is due by:
A 18% buyers premium will be added to all online purchases,
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total. Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00
Removal: Fridday June 7 2019
Site Supervisor: Arb 905-447-2487
Accounting: Victoria 437-994-6586, firstname.lastname@example.org
Banking Information (Wire Transfers):
Canadian WIRE TRANSFER INSTRUCTIONS.
Beneficiary Bank: ROYAL BANK OF CANADA
3300 HIGHWAY #7
INFINITY ASSET SOLUTIONS INC.
ACCOUNT #: 1007137
TRANSIT #: 00192
BANK #: 003
SWIFT # ROYCCAT2
Terms and Conditions of Sale Persons participating in the auction shall be bound by ALL of the following terms and conditions, which are subject to amendments and modifications by the Auctioneer at the time of auction. 1. This catalogue is meant merely as a guide. The Auctioneer believes the descriptions contained herein to be correct, but make no warranty in connection therewith. 2. Auctioneer reserves the right to sell subject to reserve and to bid for its own account and for the accounts of others, whether by verbal or written proxy, all lots are subject to prior sale. 3. The Auctioneer reserves the right to refuse any applicant the privilege of bidding or attending at the auction and may revoke such privilege at any time. 4. All Articles will be sold to the highest bidder conforming to the bid process, provided that the Auctioneer reserves the right to sell articles by individual, group lots and “in bulk,” as he deems appropriate. The Auctioneer reserves the right to sell on behalf of third parties, its own account or on the account of others. Should any dispute arise between two or more bidders or as to any bid, the lot in question may, at the Auctioneers discretion, be immediately put up again and resold. The Auctioneer shall regulate all matters relating to the conduct of the auction and his decision shall be final and binding on all bidders. The record kept by the clerk of sale, shall in all cases be accepted by the bidder as final. 5. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke his bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 6. ALL SALES ARE FINAL, ON AN “AS IS WHERE IS,” “IN PLACE” “WITH ALL FAULTS” BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED OR IMPLIED, STATUTORYOR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS, AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, OR OTHERWISE. DESCRIPTIONS HAVE BEEN PREPARED FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RULED UPON BY THE PURCHASER FOR ACCURACY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. 7. A deposit of equal to 25 percent of the purchases shall be made at the time of sale. The balance of the purchase price must be paid in full before or immediately after the conclusion of the auction. All payments must be in Cash, Certified Funds, Visa, MasterCard or Interac, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc. Deposits on account of purchases may be made in advance of the auction and the balance thereof will be refunded immediately after the auction. The Auctioneer reserves the right to put articles back up for auction if deposit is not received at or before the time of sale. 8. No article shall be removed unless paid for in full and articles purchased shall be removed within the guidelines and terms stipulated. The Purchaser shall be responsible for all the costs of removal and shall be liable for all damages, including without limitation, any environmental damage, caused during or as a result of the removal. Purchasers shall comply with all environmental laws and regulations including requirements as to bonding of movers. No claims shall be allowed after removal of the purchased article. 9. Where available, documents of transfer, including motor vehicle ownership documents, which are in possession of the Auctioneer, will be provided to the Purchaser following the auction or as soon thereafter as such documents are available. 10. No purchaser may assign, transfer or dispose of his rights in any article purchased before he has paid the purchase price in full. 11. Purchasers shall pay applicable federal and provincial taxes, or furnish exemption certificates at the time of payment for goods purchased. All purchases are subject to Federal Harmonized Sales Tax (H.S.T.) at all times. No exceptions whatsoever. 12. Time shall be of the essence. If a Purchaser fails to make payment of remove goods within the time periods hereinabove provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Auctioneer in his discretion deems advisable, and the Purchaser shall be liable for the shortfall and all costs expenses, including but not limited to interest rates (a minimum of 1.5% per month or 18% per annum), legal fees, moving and storage (a minimum rate of $2.00/sq.ft. per month) and commissions, incurred such as resale. 13. The Auctioneer assumes no responsibility or any liability once title passes, which occurs at time of payment in full. Purchasers are advised to prearrange for insurance coverage of their purchase. Title will revert to the seller in the event purchaser does not remove his purchases by the time specified. 14. If the Auctioneer is unable to deliver an article sold to a Purchaser due to fire, theft or any other reason whatsoever, the Auctioneer shall reimburse the Purchaser for all monies paid to the Auctioneer in respect of the article and the Auctioneer shall have no further liability to the Purchaser arising from or relating to such loss, including without limitation, any damages or loss of profits. 15. Bidders acknowledge that any auction site is a potentially dangerous place with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at their own risk with notice of the condition of the premises, the activities on the premises and the conduct of third parties, and the Bidder shall so advise his/her agents and employees. No person shall have any claim against the auctioneer, his agents, employees or principals for any injuries sustained for damages to or loss of property which may occur from any cause whatsoever.