Mueller 600 Gallon Jacketed S/S Processor with Vertical Agitation - Rigging Fee: $1,500

Mueller 600 Gallon Jacketed S/S Processor with Vertical Agitation - Rigging Fee: $1,500

Mueller 600 Gallon Jacketed S/S Processor with Vertical Agitation - Rigging Fee: $1,500

Westfalia 4,700 RPM Separator, Model: MSA 160-01-076, S/N: 1656 178 with Allen-Bradley Powerflex 455, HMI and S/S Enclosure - Rigging Fee: $2,000

Sherping S/S Finesaver w/S/S Control Panel, Model: CRU-7500 - Rigging Fee: $700

Walker 50,000 Gallon, Jacketed S/S Refrigerated Silo, S/N: VSHT-5652-R with S/S Tank Valve and Sensor - Rigging Fee: $9,500

Walker 30,000 Gallon Jacketed S/S Silo, Model: 889, S/N: VSHT-3095-R with S/S Tank Valve and Sensor - Rigging Fee: $9,500

6,000 Gallon S/S Horizontal Tank - Rigging Fee: $3,500

Creamery Package 10,000 Gallon S/S Refrigerated Horizontal Tank - Rigging Fee: $5,000

Centrifugal Pump with Motor and 3" x 1.5" S/S Head, Clamp-Type - Rigging Fee: $50

Fristam Centrifugal Pump with Motor and 2.5" x 2" S/S Head, Clamp-Type - Rigging Fee: $50

(2) S/S On-Line Filters with Air Valves, Check Ball Valves, (3) Stop Valves, S/S Caps, Clamps, Elbows and Piping - Rigging Fee: $500

Pasteurizer with AGC Pro5, 2-Zone S/S Plate Heat Exchanger, S/S Balance Tank, 11' x 3" Nested Tubing, (2) Centrifugal Pumps, Tri-Clover Flow Diver...

1,000 Gallon 4-Compartment (250 Gallon per), CIP S/S Tank - Rigging Fee: $2,000

S/S COP Trough, Dimensions = 6' x 3' - Rigging Fee: $150

Ampco Centrifugal Pump with 20 HP 3,525 RPM Motor, 3" x 1.5" S/S Head, Clamp-Type - Rigging Fee: $75

Centrifugal Pump with 5 HP 3,450 RPM Motor with 2" x 1.5" S/S Head, Clamp-Type - Rigging Fee: $50

(2) S/S On-Line Filters with (2) S/S Butterfly Valves, Clamps and Fittings - Rigging Fee: $100

Zero 450 Gallon S/S Horizontal Tank with 71" x 41" COP Trough, Anderson AJ-300 Chart Recorder and (2) S/S Butterfly Valves - Rigging Fee: $800

Fristam Centrifugal Pump with Motor and 2.5" x 2" S/S Head, Clamp-Type - Rigging Fee: $50

S/S Tanker CIP Ball-Sprayer with Hoist and Suction/Discharge Hoses - Rigging Fee: $150

Ingersoll Rand 10 HP 200 PSIG Air Compressor with 120 Gallon Tank - Rigging Fee: $100

Ingersoll Rand 7.5 HP 200 PSIG Air Compressor with 120 Gallon Tank - Rigging Fee: $100

Allen-Bradley PanelView Plus 1000, Allen-Bradley CompactLogix L32E with (5) I/O Cards, Allen-Bradley 1606-Xl Power Supply and Anderson AJ-300 Char...

Masosine Sine Pump with Nord Motor, 6" x 6" S/S Head, Clamp-Type and S/S, Mobile Base - Rigging Fee: $400

Centrifugal Pump with Toshiba 15 HP 1,775 RPM Motor and 4" x 4" S/S Head, Clamp-Type - Rigging Fee: $300

Ampco Centrifugal Pump with 5 HP 3,525 RPM, S/S Clad Motor and 2" x 1.5" S/S Head, Clamp-Type - Rigging Fee: $50

Ampco Centrifugal Pump with 2 HP 1,740 RPM S/S Clad Motor and 2" x 1.5" S/S Head, Clamp-Type - Rigging Fee: $50

Definox 3-Way, 4", S/S Air Valves Type: DCX3&4 DN 100 - Rigging Fee: $50 ...[more]

Damrow 45,000 LB/HR Jacketed S/S Double-O Cheese Vat with Dual-Vertical Knife Agitation (Subject to Confirmation) - Rigging Fee: $5,500

Damrow 45,000 LB/HR Jacketed S/S Double-O Cheese Vat with Dual-Vertical Knife Agitation (Subject to Confirmation) - Rigging Fee: $5,500

Anderson and Omron Digital Readouts with S/S Enclosure (Controls For Lots 30 and 31) - Rigging Fee: $100

S/S Framed, Grated Platform, 223" x 153" with Stairs and Hand Rail - Rigging Fee: $1,500

Damrow 40,000 LB/HR Jacketed S/S Double-O Cheese Vat with Dual-Vertical Knife Agitation (Subject to Confirmation) - Rigging Fee: $5,500

Damrow 40,000 LB/HR Jacketed S/S Double-O Cheese Vat with Dual-Vertical Knife Agitation (Subject to Confirmation) - Rigging Fee: $5,500

Damrow 40,000 LB/HR Jacketed S/S Double-O Cheese Vat with Dual-Vertical Knife Agitation (Subject to Confirmation) - Rigging Fee: $5,500

S/S Framed, Grated Platform, 27' x 19' with Stairs and Hand Rail - Rigging Fee: $2,000

(2) S/S Flowverter Station Stations, Jumpers, (10) 3-Way, 4" S/S Air Valves, Over 400' S/S Piping (Up To 4"), Clamps and Fittings (Double-O Area O...

Centrifugal Pump with Motor and 3" x 1.5" S/S Head, Clamp-Type - Rigging Fee: $50

(3) 3-Way, 2", S/S Air Valves, Flowverter Station, Jumper, S/S Check Ball Valve, On-Line Filter, Over 150' S/S Piping (Up To 2.5"), Sensors, Clamp...

Damrow S/S Vat with Carriage, Agitation Knives and Allen-Bradley Controls, Dimensions = 50' x 6' (Subject to Confirmation) - Rigging Fee: $5,000

Damrow S/S Vat with Carriage, Agitation Knives and Allen-Bradley Controls, Dimensions = 50' x 6' (Subject to Confirmation) - Rigging Fee: $5,000

Damrow S/S Vat with Carriage, Agitation Knives and Allen-Bradley Controls, Dimensions = 50' x 6' (Subject to Confirmation) - Rigging Fee: $5,000

S/S Vat with Carriage, Agitation Knives and Allen-Bradley Controls, Dimensions = 45' x 69" (Subject to Confirmation) - Rigging Fee: $5,000

S/S Curd Unloader with Auger - Rigging Fee: $500

S/S Vat Shovels - Rigging Fee: $50

Ampco Centrifugal Pump with S/S Clad Motor and 2" x 1.5" S/S Head, Clamp-Type - Rigging Fee: $50

Ampco Centrifugal Pump with S/S Clad Motor and 2" x 1.5" S/S Head, Clamp-Type - Rigging Fee: $50

Ampco Centrifugal Pump with Motor and 2" x 1.5" S/S Head, Clamp-Type - Rigging Fee: $50

S/S, 6-Head, Pneumatic Barrel Press Mounted on Rotatable S/S Skid - Rigging Fee: $1,000

S/S, 6-Head, Pneumatic Barrel Press Mounted on Rotatable S/S Skid - Rigging Fee: $1,000

Cable-Trol Cylinder, Model: CD4065A1-FCMX SPECIA, S/N: 248775-1 6.2021 (Replacement parts for lot 49 and 50) - Rigging Fee: $50

S/S Framed, Grated Platform, 118" x 21" with (2) Ramps - Rigging Fee: $200

6-Head, Pneumatic Whey/Curd Vacuum Probes - Rigging Fee: $2,000

6-Head, Pneumatic Whey/Curd Vacuum Probes - Rigging Fee: $2,000

THS Metal Detector with S/S Scale, Depositor, Blower, Platform and Controls - Rigging Fee: $1,600

Tri-Clover Centrifugal Pump with 15 HP 3,515 RPM Motor and 3" x 1.5" S/S Head, Clamp-Type - Rigging Fee: $100

Fristam Centrifugal Pump with Motor, 3" x 2" S/S Head, Clamp-Type N, Mounted on S/S Base - Rigging Fee: $75

45 Gallon S/S Tank with Clamp-On Lid, 3 and 2-Way S/S Air Valves and Air-Actuated Ball Valve - Rigging Fee: $200

Ampco Centrifugal Pump with S/S Clad Motor and 2" x 1.5" S/S Head, Clamp-Type - Rigging Fee: $50