TRADEMASTER MODEL 14303 10" DOUBLE END BENCH GRINDER, S/N: N/A

MILFORD 12" DOUBLE END PEDESTAL GRINDER, S/N: N/A

VERTICUT 115B ROLL-IN VERTICAL BANDSAW WITH 18"X30" TABLE, 12" THROAT, 3.25 HP, 115V, SINGLE PHASE, S/N: 4077

DARBERT HORIZONTAL BANDSAW, S/N: 0260 (CI) [RIGGING FEE FOR LOT #4 - $150 CAD PLUS APPLICABLE TAXES]

INVICTA ELLIOT 4MR 18" SHAPER WITH 16"X12" T-SLOT TABLE, SPEEDS TO 101 STROKES/MINUTE, S/N: N/A (FIXTURES NOT INCLUDED) (CI) [RIGGING FEE FOR LOT ...

{ Group of lots: 6, 7 } MAS VF4 5' RADIAL ARM DRILL WITH 12" COLUMN, SPEEDS TO 2000 RPM, COOLANT, S/N: 9795 (CI) [RIGGING FEE FOR LOT #6 - $375 C...

{ Group of lots: 6, 7 } 36"X22"X24" T-SLOT BOX TABLE (CI) [RIGGING FEE FOR LOT #7 - $25 CAD PLUS APPLICABLE TAXES]

CHIEN YEH CY-680X2000 GAP BED ENGINE LATHE WITH 12" 3-JAW CHUCK, 30" SWING OVER BED, 76" DISTANCE BETWEEN CENTERS, 3" SPINDLE BORE, SPEEDS TO 1000...

SPARE 14" 4 JAW CHUCK

{ Group of lots: 10, 11, 12, 13 } STANKO 16K401-3 GAP BED ENGINE LATHE WITH 32" 4-JAW CHUCK, 36" SWING OVER BED, 127" DISTANCE BETWEEN CENTERS, 4...

{ Group of lots: 10, 11, 12, 13 } SPARE 19.5" 4 JAW CHUCK

{ Group of lots: 10, 11, 12, 13 } SPARE 16" 3 JAW CHUCK

{ Group of lots: 10, 11, 12, 13 } LOT/ LATHE TOOLING - HSS & CARBIDE INSERT CUTTERS ...[more]

LOT/ LISTA CABINET WITH CONTENTS - TOOLING & ACCESSORIES ...[more]

PEARSON HYDRAULIC BRAKE PRESS WITH 175 TON CAPACITY, 147" OVERALL BENDING LENGTH, 122" BETWEEN HOUSINGS, 8" STROKE, 17" OPEN HEIGHT, SAFETY LIGHT ...

STANKO 2620B TABLE-TYPE BORING MILL WITH 3.5" SPINDLE, 44"X49" ROTARY T-SLOT TABLE, TRAVELS: VERTICAL-41", CROSS-40", LONGTITUDINAL-49", #40 TAPER...

{ Group of lots: 16, 17 } LOT/ (15) 40 TAPER TOOL HOLDERS

{ Group of lots: 16, 17 } LOT/ HOLD-DOWN CLAMPING

STANKO 65A90 CNC VERTICAL MILL WITH (RETROFIT) HEIDENHAIN CNC CONTROL, 108"X41" TABLE, TRAVELS: X-100.50", Y-39.00", Z-34.466", APPROX. 32" MAX. D...

12" MACHINE VISE

{ Group of lots: 20, 21, 22 } LOT/ (5) 50 TAPER TOOL HOLDERS

{ Group of lots: 20, 21, 22 } LOT/ (5) 50 TAPER TOOL HOLDERS

{ Group of lots: 20, 21, 22 } LOT/ HOLD-DOWN CLAMPING & SET UP BLOCKS ...[more]

HAAS (1997) VF9 CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 36"X84" T-SLOT TABLE, TRAVELS: X-49", Y-40", Z-30", SPEEDS TO 3000 RPM, 40 TA...

JVC 35 KVA TRANSFORMER WITH 600HV, 220LV, 3 PH, 60 HZ (CI) [RIGGING FEE FOR LOT #24 - $50 CAD PLUS APPLICABLE TAXES]

12" MACHINE VISE

HOMGE 15" DIA. ROTARY TABLE

{ Choice of lots: 27, 28, 29 } LOT/ (2) 60"X18 ANGLE PLATES

{ Choice of lots: 27, 28, 29 } LOT/ (2) 18"X18" ANGLE PLATES

{ Choice of lots: 27, 28, 29 } LOT/ 18"X12" ANGLE PLATES

LOT/ V-BLOCKS

{ Choice of lots: 31, 32 } 96"X36" DRILLED & TAPPED SINE PLATE WITH ANCHORS ...[more]

{ Choice of lots: 31, 32 } 30"X15" DRILLED & TAPPED SINE PLATE WITH ANCHORS ...[more]

{ Choice of lots: 33, 34 } FORZA 8" MACHINE VISE

{ Choice of lots: 33, 34 } FORZA 8" MACHINE VISE

{ Group of lots: 35, 36, 36A } ESAB AVENGER AVG2-4 VIS2C REMAN BRIDGE-TYPE CNC CUTTING TABLE WITH ESAB VISION 2000C/3000 CNC CONTROL, (1) PLASMA ...

{ Group of lots: 35, 36, 36A } ESAB ESP600C PLASMA CUTTING POWER SOURCE, S/N: PD-I651077 (CI) [RIGGING FEE FOR LOT #36 - $150 CAD PLUS APPLICABLE...

{ Group of lots: 35, 36, 36A } LOT/ LISTA 10 DRAWER TOOL CABINET WITH ESAB PERISHABLES & TOOLING ...[more]

YALE GLP 080LFNSBE088 LPG FORKLIFT WITH 7550LB CAPACITY, 24" LOAD CENTER, 185.6" MAX. VERTICAL REACH, 3-STAGE MAST, CUSHION TIRES, 4'5" FORKS, S/N...

YALE GLP110MGNGBV124 LPG FORKLIFT WITH 11,000 LB CAPACITY, 24" LOAD CENTER, 180" MAX. VERTICAL REACH, OUTDOOR CUSHION TIRES, 2-STAGE MAST, 5' FORK...

LOT/ (3) FIBREGLASS A-FRAME LADDERS

DEWALT POWERSHOP 250 10" RADIAL ARM SAW, S/N: N/A

DIE LIFT CART

LOT/ STEEL RACK WITH CUT OFFS AND WIP & MATERIAL RACK WITH CONTENTS ...[more]

LOT/ CABINETS WITH HARDWARE

{ Group of lots: 44, 45 } PORTABLE PARTS WASHER

{ Group of lots: 44, 45 } BARREL DOLLY WITH PUMP

LOT/ ENERPAC HYDRAULIC POWER PACK WITH PISTONS & (2) MAG BASE DRILLS ...[more]

36"X24"X4.5" GRANITE SURFACE PLATE WITH STAND

{ Group of lots: 48, 49 } LOT/ STEEL RACK WITH CONTENTS - HARDWARE, TOOLING, SHOP SUPPLIES

{ Group of lots: 48, 49 } LOT/ STEEL RACK WITH INSPECTION EQUIPMENT - INCLUDING OUTSIDE MICROMETERS, INSIDE MICROMETERS, VERNIER CALIPERS, STRAIG...

LOT/ LISTA 15 DRAWER TOOL CABINET WITH PERISHABLE TOOLING - INCLUDING TAPS, DRILLS, EXTENSION DRILLS, TAPER SHANK DRILLS, REAMERS, DIES & HANDLES,...

{ Group of lots: 51, 52 } LOT/ PERISHABLE TOOLING - INCLUDING TAPS, TAPER SHANK DRILLS

{ Group of lots: 51, 52 } LOT/ 50 TAPER TOOL HOLDERS, FIXTURES & CLAMPING ...[more]

LOT/ 2 DRAWER STEEL SHOP TABLE WITH TOOLING & PARTS ...[more]

MASTER FAN 44" SHOP FAN