Refine your search

Estimate

Filter by Price Range

Category

There are 23 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

ACCURSHEAR 625010 HYDRAULIC SHEAR WITH 10'X0.25" CAPACITY, FRONT OPERATED POWER BACK GAUGE , SQUARING ARM, OMRON SAFETY LIGHT CURTAINS, 575V/3PH/6...

ACCURPRESS 717512 HYDRAULIC PRESS BRAKE WITH 12' X 175 TON CAPACITY, 8" STROKE, 14" OPEN HEIGHT, 10" THROAT, 124" BETWEEN HOUSINGS, HONEYWELL SHAD...

BOLDRINI BSA362 HEAVY DUTY, VERTICAL PLATE ANGLE ROLLS, S/N 4984  [RIGGING FEE FOR LOT # 3  - $1300.00 USD - PLUS TAXES] ...[more]

BRANCING WELDING MANIPULATOR ENGINE LATHE CONVERSION WITH 36" SWING, 96" CENTERS, 2" BORE, 12" 3-JAW CHUCK, 24" 4-JAW CHUCK, S/N 4172 [RIGGING FEE...

LOVAT ROTATING WELDING POSITIONER WITH LEESON SPEED MASTER VARIABLE SPEED CONTROL, 12" 3-JAW CHUCK, S/N N/A  [RIGGING FEE FOR LOT # 5  - $985.00 U...

KONE CRANES 40 TON CAPACITY SINGLE GIRDER CRANE WITH APPROX 50' SPAN, S/N 10853  [RIGGING FEE FOR LOT # 11  - $800.00 USD - PLUS TAXES] ...[more]

{ Group of lots: 12, 13, 14 } CSEPEL RFH5-4000 11' RADIAL ARM DRILL WITH SPEEDS TO 1900 RPM, 480V/3PH/60HZ, S/N 13377  [RIGGING FEE FOR LOT # 12 ...

{ Group of lots: 12, 13, 14 } 39"X31"X25" T-SLOT BOX TABLE  [RIGGING FEE FOR LOT # 13  - $50.00 USD - PLUS TAXES]

{ Group of lots: 12, 13, 14 } 39"X31"X25" T-SLOT BOX TABLE  [RIGGING FEE FOR LOT # 14  - $50.00 USD - PLUS TAXES]

RED-ROCK (2012) RWIP-100 TANK TURNING ROLL SET (1) POWERED, (1) IDLER WITH 100 METRIC TON CAPACITY, 18" DIAMETER STEEL/COMPOSITE ROLLS, (4) POSITI...

LOVAT HYDRAULIC CABLE PULLER/WINDER, S/N N/A  [RIGGING FEE FOR LOT # 16  - $50.00 USD - PLUS TAXES] ...[more]

MORI-SEIKI (2010) NT4300DCG/1500SZ CNC TWIN SPINDLE SIMULTANEOUS 5-AXIS INTEGRATED MILL TURN CENTER WITH MORI SEIKI MAPPS MSX CNC CONTROL, 25.9" M...

MARCUS TRANSFORMER  [RIGGING FEE FOR LOT # 18  - $100.00 USD - PLUS TAXES] ...[more]

MORI-SEIKI (2009) NT6600DCG/4000CS CNC TWIN SPINDLE SIMULTANEOUS 5-AXIS INTEGRATED MILL TURN CENTER WITH MORI SEIKI MAPPS MSX CNC CONTROL, 42.1" M...

MARCUS TRANSFORMER  [RIGGING FEE FOR LOT # 20  - $100.00 USD - PLUS TAXES] ...[more]

GRAZIANO SAG 22 ENGINE LATHE WITH 24" SWING OVER BED, 72" BETWEEN CENTRES, APPROX. 30 HP, DRO, S/N: N/A (CI) ...[more]

EMA 3' RADIAL ARM DRILL WITH 24"×12" TABLE, SPEEDS TO APPROX. 1100 RPM, #3 MORSE TAPER SPINDLE, S/N: N/A ...[more]

Loading...Loading...
  • Lots per page
  • 60
  • 120
  • 240

Recently Viewed Lots