Mix tanks, Batch Tanks, Processors, Bio-reactors, Liquefiers, Vemag HP15’s, Color Twist Candy Extruder, Candy Equipment, Packaging Equipment & More.

Refine your search

Estimate

Filter by Price Range

Primary Category

Category

Brand

Item Type

State/Province

Town/City

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
There are 151 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240
Page of 3

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

APV SS 1000 gallon Processor, Model PC, SN K-2021, National Board 9825, Year 1999, Vessel MAWP 40 psi at 350F, MDMT -20 F at 40 psi, Jacket MAWP 1...

APV 1500 gallon SS Jacketed Tank with top agitation and side sweep, Model PC, SN K-2451, Year 1999, 88 in. dia. x 53 in. straight side, with 26 in...

APV 1000 gallon SS Jacketed Tank with top agitation and side sweep, Model PC, SN K-2449, Year 1999, 76 in. dia. x 53 in. straight side, with 21 in...

APV 300 Gal. SS full jacketed bio reactor, SN K-2423, Year 1999, National Board NO. 9819, 57 in. dia. x 36 in. straight side, 15 in. cone bottom, ...

Westfalia Separator, Type 35-03-977, SN 1714432, Mfg. Date: 1997, RPM of bowl: 7230, permissible density of product: 1.1 g/c.c. (heavy liquid), 1....

Urschel Comitrol Processor Mill, Model 1700, SN 2018, 18 in. dia cutting drum, Urschel 66860 cutter, discharge height 27 1/2 in., SS frame, missin...

APV Cozzini Unibloc-PD SS PD pump, SN 4689, 2 HP motor, 6 in. sanitary fitting infeed, 3 in. sanitary fitting discharge, SS internal rotors, skid ...

2008 American Alloy Fab Inc. SS single wall receiving tank, SN 5516-A, 27 in. dia. 44 in. straight side, dome top and bottom, 2.5 in. flange fitti...

2008 American Alloy Fab Inc. SS single wall receiving tank, SN 5516-B, 27 in. dia. 44 in. straight side, dome top and bottom, 2.5 in. flange fitti...

APV SS centrifugal pump, Type W-22-20, SN PP-1065, 2 in. sanitary fitting infeed, 2 in. sanitary fitting discharge, 3 HP motor, 230/460V, 3 phase,...

APV SS pneumatic M series ball valves, one, two, and three-way, 2 in. sanitary fitting ball valves, aseptic diaphragm type (EACH) ** Simple Riggin...

APV SS pneumatic ball valves, M series, Model M41T20B1E3, Aseptic diaphragm type, 2 in. sanitary fitting ball valve (EACH) ** Simple Rigging and L...

APV SS pneumatic ball valve, U 003-33-99-01, 3.75 in. flange ports, 8 bolt hole pattern ** Simple Rigging and Loading Fee: $50 **

APV SS pneumatic 3-way ball valve, 4.5 in. sanitary fitting ports, M series ** Simple Rigging and Loading Fee: $50 **

Unused 2017 Feldmeier 3000 gallon capacity SS Jacketed Batch Tank. SN 17E503, Natl Board: 9753, Standard No. 01-09, Constructed out of 304 SS, 96 ...

SS 3-tank CIP skid, (3) SS single wall tanks, 32 in. diameter x 36 in. tall, top manway 16 in. diameter, each tank has (4-5) 2 in. sanitary clamp ...

2008 Tanis Group 2-tank skid with heat exchangers, SS jacketed tank 350T-15DI, 32 in. diameter x 32 in. tall, 12 in. diameter manway top, (5) 2 in...

Unused 2019 air receiving tank, 46 in. diameter x 120 in. tall, 8 in. flange in/out, MAWP 155 psi at 400F, MDMT -20F at 155 psi ** Simple Rigging ...

Hartman Scale 2-ton super sack unloading station, Loadmate 2-ton electric chain hoist with lifting spider for super sacks, 96 in. long load beam *...

Hartman Scale 2-ton super sack unloading station, Harrington 2-ton electric chain hoist with lifting spider for super sacks, 96 in. long load beam...

Hartman Scale super sack massaging unloader, for lots 204/205, air massage ** Simple Rigging and Loading Fee: $100 **

(4) Sun-mite infrared heater, Model FHK-1324-3A, 240 volt, 3 phase (LOT) ** Simple Rigging and Loading Fee: $50 **

ACMA GD gum slitter/breaker, Type SF-2, SN 880088, 1/2 in. slits ** Simple Rigging and Loading Fee: $50 **

Vemag Robot HP15CK filler, SN 1441408, SS hopper 43 in. diameter x 30 in. tall, 4 in. throat, carbon screws 1in. spacing, SS frame ** Simple Riggi...

SS extruding manifold for Vemag fillers, 4 in. sanitary clamp ends, (3) 4 in. sanitary clamps on back, (50) adjustable extruding ports 0.25 in. di...

Wacker Engineering SS 3-tank pump skid, (3) SS tanks 10 in. diameter x 16 in. tall, (2) agitators, (3) SPX pd pumps Model 006U1, aluminum frame, o...

SS seasoning drum, 120 in. long x 36 in. diameter drum, 16 in. diameter x 34 in. tall infeed, 30 in. diameter x 22 in. tall discharge, motor and d...

FP Developments SS sorting table, 36 in. diameter, 26 in. tall, motor and drive, SS frame, adjustable legs ** Simple Rigging and Loading Fee: $50 ...

(3) Movincool spot cooling systems, Model 20HRF-1, 208/230 volt, 1 phase, (2) 6 in. ducts, (1) 12 in. duct, on casters ** Simple Rigging and Loadi...

NID SS starch removing incline conveyor, 90 in. long x 19 in. wide x 32 in. infeed x 42 in. discharge, motor and drive, SS frame, on casters ** Si...

10-head bucket scale, SS dimple buckets, 2-drop, 88 in. infeed, 43 in. discharge, manual slide for 2 different drop spots, missing one bottom funn...

Meyer bucket elevator, Model 18142, SN 1137, 3 ft. long bottom leg, 13 ft. tall, 3 ft. long top leg, believed to be missing top end with sprocket,...

Little David case sealer, Model LD7DM, top and bottom taper, missing both heads, 9 in. wide, dual belts, mild steel frame, motor and drive ** Simp...

(3) Valley Craft drum handler, Model 8565-C, 800 lb. capacity, electric lift and tilt, 12 volt, on casters (LOT) ** Simple Rigging and Loading Fee...

2016 Leibinger ink jet marking machine, Type JET2neo, 1 head, no stand, SS frame, on casters ** Simple Rigging and Loading Fee: $25 **

Labeling Systems Inc label applicator, Model 40.50, 120 volt, adjustable height stand, 6 in. wide rolls, on casters ** Simple Rigging and Loading ...

2012 Leibinger ink jet marking machine, Type JET2neo, 1 head, with stand, SS frame, on casters ** Simple Rigging and Loading Fee: $25 **

Little David adjustable case taper, Model LDUE/2/50, 110 volt, top and bottom heads, mild steel frame, on casters ** Simple Rigging and Loading Fe...

Label applicator, Type 2100, Year 2005, top label, Proface touch screen, 7 in. rolls, 62 in. long x 6 in. wide x 30 in. tall belt drive, 220 volt,...

3M matic adjustable case sealer, Model 200A, Type 40800, SN 51408, 2013, 120 volt, top head, on casters ** Simple Rigging and Loading Fee: $50 **

Lightnin agitator for drums, 0.5 hp drive, 48 in. long shaft, 2 impeller, mounted on SS stand, on casters ** Simple Rigging and Loading Fee: $25 **

Baker Perkins turbo film cooker, SN 101/1, Year 2011, with APV heat exchanger 48 in. tall x 15 in. wide x 8 in. deep, SS tank 16 in. diameter x 32...

Ashe Converting Equipment paper handling system, Model 1250, SN 952-15, includes guillotine and paper feeder, guillotine with slitter, slit width ...

2015 Leibinger ink jet marking machine, Type JET2neo, 1 head, with stand, SS frame, on casters ** Simple Rigging and Loading Fee: $50 **

Fastrack incline conveyor, 96 in. long x 18 in. wide x 28 in. infeed x 44 in. discharge, SS mesh belt, (3) air nozzles for de-dusting, (3) hoppers...

Incline belt conveyor, 108 in. long x 10.5 in. wide x 10 in. infeed x 38 in. discharge, trough frame, missing end pulley and motor and drive, SS f...

Fastrack incline conveyor, 96 in. long x 15 in. wide x 16 in. infeed x 44 in. discharge, SS mesh belt, (2) air nozzles for de-dusting, (2) hoppers...

Lot 236

Belt conveyor

Belt conveyor, trough frame, 132 in. long x 12 in. wide 34 in. tall, e-stop line, missing end pulley, SS frame, missing motor and drive, on caster...

ENR incline z-conveyor, 102 in. long x 12 in. wide x 14 in. infeed x 48 in. discharge, cleated blue belt, 10 in. spacing x 1/2 in. tall cleats, mo...

SPX SS centrifugal pump, 2 ph., 5 in. diameter head, 2 in. inlet/outlet, SS frame, on casters ** Simple Rigging and Loading Fee: $25 **

System Technology, Inc incline z-conveyor, approximately 108 in. long x 108 in. tall, 3 ft. leg, 11 ft. incline, 4 ft. top leg, blue plastic cleat...

Metal detector with belt conveyor, aperture 12.5 in. wide x 7 in. tall, vinyl belt 72 in. long x 10 in. wide x 28 in. tall, SS frame, on casters *...

Dual panel labeler, Type 620C, year 2005, 7.5 in. wide mandrels, SS frame, on casters ** Simple Rigging and Loading Fee: $150 **

Fastrack belt conveyor, SS mesh belt, 72 in. long x 14.5 in. wide x 40 in. tall, motor and drive, SS frame ** Simple Rigging and Loading Fee: $50 ...

Timing conveyor for lots 226 and 242 and tape sealer, 112 in. long, motor and drive, SS frame, on casters ** Simple Rigging and Loading Fee: $100 ...

Loading...Loading...
  • Lots per page
  • 60
  • 120
  • 240
Page of 3

Recently Viewed Lots