Aluminum trough, 60 in. long x 28 in. wide x 18 in. deep, dented and cracked lips ** Rigging Fee: $50 **

Electric barrel pump, 1/3 hp, 230/115 V, SS tube 38 in. long x 1.5 in. diameter ** Rigging Fee: $25 **

Vermette 500 lb. cable lift, 22 in. long x 20 in. wide forks, 72 in. lift height, on casters ** Rigging Fee: $75 **

Four shelf wire metro rack, 60 in. long x 18 in. wide x 80 in. tall, on casters ** Rigging Fee: $50 **

4 spot loaf pans, 9 in. long x 4.5 in. wide x 2.5 in. deep loaves, OAD 22 in. long x 9.5 in. wide x 3 in. tall, approximately 178 ** Rigging Fee: ...

Aluminum sheet pan cart with sheet pans, 18 in. x 26 in. sheet pans, approximately 110 pans. ** Rigging Fee: $25 **

Pallet of assorted 18 in. x 26 in. sheet pans and 18 in. x 26 in. bun pans, approximately 100 standard sheet pans, approximately 60 bun pans ** Ri...

18 in. x 26 in. sheet pans with mild steel cart, approximately 60 pans ** Rigging Fee: $175 **

Mild steel sheet pan carts ** Rigging Fee: $25 ** ...[more]

Aluminum tub cart, 22 in. long x 14 in. wide ** Rigging Fee: $10 **

2019 Belshaw Adamatic double rack oven, Model Oven-2020, SN S456294, used for 2 months, natural gas, 275,000 btu/hr., 208-240 volt, 3 phase, manuf...

2019 Belshaw Adamatic double rack oven, Model Oven-2020, SN S448823, used for 2 months, natural gas, 275,000 btu/hr., 208-240 volt, 3 phase, manuf...

2019 Belshaw Adamatic double rack oven, Model Oven-2020, SN S448782, used for 2 months, natural gas, 275,000 btu/hr., 208-240 volt, 3 phase, manuf...

2019 Belshaw Adamatic double rack oven, Model Oven-2020, SN S457109, used for 2 months, natural gas, 275,000 btu/hr., 208-240 volt, 3 phase, manuf...

Hobart double rack oven, Model HBA2G, SN 24-1051930, 300,000 btu/hr., 208-240 volt, 3 phase ** Rigging Fee: $1000, skidded **

2012 Shanklin Sealed Air L-bar sealer, Model A27A, SN A12029-01, lug infeed, 18 in. lug spacing or can be set in increments of 4 in. lug spacing, ...

Ameripak flow wrapper, Model 140, SN 25-473, L-R, 14 ft. long lug infeed, 9 in. long x 1 in. tall lugs, 4.5 in. wide, 28 in. web, bottom crimp, 10...

Doboy super mustang flow wrapper, SN 83-20746, L-R, 96 in. long lug infeed, 9 in. long x 1 in. tall lugs, 3 in. wide bed, 24 in. web, bottom crimp...

Doboy super mustang flow wrapper, SN 84-21671, R-L, 108 in. long lug infeed, 12 in. long x 1 in. tall lugs, 3.25 in. wide bed, bottom crimp, 21 in...

3M Matic adjustable case sealer, 77R random case sealer, Model 18500, SN 1286, top and bottom tape heads, 17 in. wide infeed, on casters ** Riggin...

Squid Ink adjustable case sealer, top and bottom tape heads, 16 in. wide, on casters ** Rigging Fee: $200 **

2012 Loma metal detector check weigher combination, Model LCW-3000 COMBO, SN KCB23274, L-R, Loma IQ3 metal detector, 18 in. wide x 6 in. tall aper...

2012 Loma metal detector check weigher combination, Model LCW/COMBO6000 , SN KCB23287, R-L, Loma IQ3 metal detector, 18 in. wide x 6 in. tall aper...

2015 Loma IQ3 metal detector, Model quickship, SN KMC25863, 14 in. wide x 6 in. tall aperture, plastic belt conveyor, 60 in. long x 12 in. wide x ...

Ramsey metal detector with Safeline conveyor, Ramsey metal detector head, 24 in. wide x 17 in. tall aperture, Safeline conveyor bed and controls, ...

Shrink Tech Systems L-bar sealer, Model STS-AL, SN 170409693, 15 in. wide infeed, 24 in. wide, 24 in. long x 18 in. wide seal, 220 volt, single ph...

Graybill Machines honey bun guillotine and proofer tray loader, Job 15792/15781, reconditioned by Topos Mondial Corporation in 12-2017, Job # 7197...

5 pedestal ambient fan cooling system, includes (8) assorted 18-22 in. diameter fans for ambient cooling of rack oven racks ** Rigging Fee: $200 **

2019 Quadrel top labeler, Quadrel labeler head Model Q110, SN 82844-02, R-L, with 2012 Quadrel labeler conveyor, Model Q DRIVE TOP LABELER, SN 808...

2019 Quadrel top labeler, Quadrel labeler head Model Q110, SN 82844-01, R-L, with 2012 Quadrel labeler conveyor, Model Q DRIVE TOP LABELER, SN 808...

2008 Barrington check weigher, Model BPCW-500, SN 070785, 44 in. long x 10 in. wide x 32 in. tall, SS frame ** Rigging Fee: $150 **

2012 Loma IQ3 metal detector, Model quickship, SN KMC23273, 17.5 in. wide x 15 in. tall aperture, plastic belt conveyor, 72 in. long x 16 in. wide...

Loma metal detector, Model super scan micro, remanufactured by Topos Mondial Corp 12-09, Job 3568, 20 in. wide x 4 in. tall aperture, plastic belt...

Hitachi ink jet printer, Model RX2-SD160W, SN R2820379709, broken head ** Rigging Fee: $150 **

Domino ink jet printer, Model A-200, SN N3B00804, with head, on SS cart ** Rigging Fee: $150 **

Domino ink jet printer, Model A-200, SN N2A07932, with head, on SS cart ** Rigging Fee: $150 **

Domino ink jet printer, Model A-200, SN N2A25288, with head, on SS cart ** Rigging Fee: $150 **

Weldotron heat shrink tunnel, Model 7221, SN HJ14172, 68 in. long x 28 in. wide x 36 in. tall conveyor, 22 in. wide x 8 in. tall aperture, 46 in. ...

Shanklin heat shrink tunnel, Model T-7XL, SN T-9647, 60 in. long x 42 in. wide x 32 in. tall conveyor, 22 in. wide x 8 in. tall aperture, 42 in. l...

Shanklin heat shrink tunnel, Model T71, SN T12057-01, 96 in. long x 35 in. wide x 36 in. tall conveyor, 22 in. wide x 10.5 in. tall aperture, 60 i...

Autolabe label applicator with hot stamp printer, hot stamp printer, Model 310, SN 070619, labeler head Model 110S LH EXT.REV E, SN 070620, frame ...

2019 Quadrel labeler, Model 3 PANEL Q110 APPLICATOR, SN 82845-200, R-L, with 2019 Markem Imaje smartdate 60 coder with head and controller, convey...

2012 WS Packaging top/bottom/side labeler, Model ASD TOP/BOT./SIDE LABELER, SN JN69507-1, R-L, conveyor 146 in. long x 6 in. wide x 36 in. tall, 2...

AMF Glen planetary mixer, Model 74-36, SN 663, with (2) SS bowls and dollies 33 in. dia x 28 in. deep, (2) guards ** Rigging Fee: $800 **

Ohaus defender 5000 digital scale, Model T51P, 14 in. x 12 in. SS platform ** Rigging Fee: $25 **

2008 Vestil self elevating spring cart, Model ETS230, 230 lb capacity, on casters ** Rigging Fee: $25 **

Pfening SS control panel, 48 in. wide x 20 in. deep x 72 in. tall, (10) Allen Bradley powerflex 40 vfds, 1 hp, (2) Allen Bradley powerflex 40 vfds...

SS gravity decline conveyor, 60 in. long x 17 in. wide x 33 in. infeed x 24 in. discharge ** Rigging Fee: $25 **

90 degree rod belt conveyor, 36 in. wide rod belt x 65 in. tall, overall 72 in. long x 72 in. wide, washdown motor and drive, SS frame, adjustable...

90 degree rod belt conveyor, 36 in. wide rod belt x 65 in. tall, overall 72 in. long x 72 in. wide, motor and drive, SS frame, adjustable height l...

DCA SS rod belt conveyor, 96 in. long x 36 in. wide x 65 in. tall, SS frame, motor and drive, adjustable height legs ** Rigging Fee: $150 **

3M Matic adjustable case sealer, Model 800af, Type 3900, SN 4143M, top and bottom tape heads with tail tucker, missing bottom tape head ** Rigging...

Southworth self elevating spring load pallet lift, Model PP360R4, 44 in. diameter turntable ** Rigging Fee: $50 **

Quadrel labeling head, Model Q60/Q65, left hand, with 2012 Markem Imaje Smart Date 5 coder with controller and head ** Rigging Fee: $50 **

Quadrel labeling head, Model Q60/Q65, right hand, with 2012 Markem Imaje Smart Date 5 controller, 2007 Smart Date 5 print head ** Rigging Fee: $50...

Belshaw donut depositor, Model 2040, SN 884, Model MS/8/10/12/16/S/N167, 36 in. wide, on cart ** Rigging Fee: $150 **

SS icing glazing system with tank, tumbler and conveyor, SS icing glaze tank, 30 in. long x 27 in. wide x 6 in. deep bed, remanufactured by Topos ...

SS sugar tumbler, with recirculating sugar return system consisting of SS blender with screw conveyor, SS drum 108 in. long x 24 in. diameter x 63...

SS sugar tumbler, with recirculating sugar return system consisting of SS blender with screw conveyor, SS drum 108 in. long x 24 in. diameter x 63...

Moline SS sugar tumbler, with recirculating sugar return system consisting of SS blender with screw conveyor, SS drum 84 in. long x 28 in. diamete...