SALE IN ASSOCIATION WITH REICH BROTHERS - Equipment to produce muffins, cookies, danishes, croissants, and much more!
No Image
Auction closed
Timed auction

Auction dates

  • Ended Jun 04, 2020 5:15pm CT (11:15pm BST)

Auction details

Currency: USD
Buyer's premium: 18.00%
Sales tax: 6.50%

Venue address

Ormond Beach, Florida Ormond Beach , Florida 32174 United States

Auction house

Add to favorites Ask a question phone_in_talk (701) 745-3356
You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
469 item(s)
  • List
  • Grid
  • 469 item(s)
    /page

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

2016 Easymac muffin line, 45-60 strokes per minute, currently set up for a 35 spot pan, 8-out, cups depositor, SN 58415514, cup denester, tray tra...

Moline reversible sheeter, Model 530REV, SN RS-1046-S-87, 230 volt, 60 hz, 1 phase, 93 in. long x 24 in. wide belt, on casters with legs { Rigging...

2016 Easymac makeup table, Model QTP670/1800, SN 16746, SS 26 in. wide sheeting rolls, 148 in. long x 26 in. wide white belt, with dusters, touch ...

Goodway slurry mixer, Model VBM2000, SN 14, 2500 lb capacity, SS tank 44 in. diameter x 53 in. sidewall, pneumatic lid, 30 hp main drive, 10 hp ag...

Goodway slurry mixer, Model VBM2000, SN 12, 2500 lb capacity, SS tank 44 in. diameter x 53 in. sidewall, pneumatic lid, 75 hp drive main drive, 10...

Goodway slurry mixer, 1500 lb capacity, SS tank 45 in. diameter x 43 in. sidewall, pneumatic lid, 60/30 hp drive main drive, 30 hp agitator motor,...

AMF Glen 340 quart mixer, SN 7436 328, 15 hp motor, with beater, with 4 SS bowls and dollies 36 in. dia x 30 in. deep, Vacon X series drive contro...

Hobart 80 quart mixer, Model M802, SN 31-1240-078, with SS bowl, beater, hook, whisk, guard { Rigging Fee: $250 *Skidded* }

Hobart 140 quart SS bowl { Rigging Fee: $50 }

Maple top work table, 121 in. long x 36 in. wide x 36 in. tall, on castes, with SS lower shelf { Rigging Fee: $50 }

Mimax SS square silo, 79 in. long x 75 in. wide x 195 in. tall, with Binmaster level indicators, with Pfening rotary vein airlock { Rigging Fee: $...

Mimax SS square silo, 79 in. long x 75 in. wide x 195 in. tall, with Binmaster level indicators, with Pfening rotary vein airlock { Rigging Fee: $...

Mild steel control panel for Mimax silos, 36 in. wide x 12 in. deep x 72 in. tall { Rigging Fee: $150 *Skidded* }

Tuthill dual lobe rotary blower package, Model 6005-21L2, SN 1595060708, 15 hp motor, skid mounted { Rigging Fee: $200 }

Mimax control panel, with various controllers and digital readout, 48 in. wide x 18 in. deep x 68 in. tall { Rigging Fee: $150 *Skidded* }

Vacuhoist vacuum hoist, Model VM160, max capacity 150 lbs., on trolley, with vacuum pump and post { Rigging Fee: $300 }

SS 3-compartment sink, 90 in. wide x 24 in. deep x 36 in. tall { Rigging Fee: $150 }

SS 2 compartment sink, 99 in. wide x 28 in. deep x 37 in. tall { Rigging Fee: $150 }

Mild steel elevated platform, 31 ft. long x 20 ft. long x 50 in. tall ,welded construction with poly grate, no stairs { Rigging Fee: $1500 }

Aluminum 6 step platform, 98 in. long x 48 in. wide x 48 in. tall { Rigging Fee: $100 }

SS table with mild steel legs, 72 in. long x 30 in. wide x 34 in. tall { Rigging Fee: $50 }

Traulsen 2 door refrigerator, Model RRI 2-32L UT, SN 681, 208 volt single phase, 70 in. wide x 35 in. deep x 87 in. tall, on legs { Rigging Fee: $...

2013 Reiser Vemag vacuum filler, Model Robot500, SN 1284614, with pneumatic guillotine, high torque drive, 220/240 volt, 3 phase, carbon steel scr...

4-spot dough press, 3.5 in. diameter cups, on mild steel cart { Rigging Fee: $150 *Skidded* }

Lot 33

Belt conveyor

Belt conveyor, 120 in. long x 22 in. wide x 36 in. tall, gray plastic belt, galvanized legs, motor and drive { Rigging Fee: $100 }

Decline belt conveyor, 98 in. long x 36 in. wide x 51 in. infeed x 44 in. discharge, Leeson wash guard motor, SS legs { Rigging Fee: $100 }

Pan conveyor with pan flipper, 161 in. long , adjustable width from 20 in. to 34 in. wide, SS table top belt, washdown motor and drive, SS frame {...

Mallet target area cake pan greaser, Model 620-TF, 172 in. long x 36 in. wide, 14 in. lug spacing, with control panel, 208 volt, 3 phase, poweflex...

90 degree conveyor, 36 in. wide SS rode belt, 68 in. long x 66 in. wide x 36 in. tall, SS legs, no motor and drive, sprocket driven from separate ...

Lot 38

Belt conveyor

Belt conveyor, 117 in. long x 36 in. wide x 36 in. tall, gray inlock belt, motor and drive, mild steel frame, on casters { Rigging Fee: $200 }

2 lane belt conveyor, 120 in. long x 36 in. wide belts x 36 in. tall, mild steel frame, motor and drive { Rigging Fee: $150 }

Lot 40

Belt conveyor

Belt conveyor, 155 in. long x 36 in. wide x 36 in. tall, motor and drive, mild steel frame { Rigging Fee: $200 }

Aluminum 6 step crossover, 48 in. tall x 58 in. wide x clearance, overall 156 in. long, 28 in. wide steps { Rigging Fee: $100 }

Lot 42

Belt conveyor

Belt conveyor, 26.5 ft. long x 36 in. wide x 36 in. tall, Leeson wash guard motor and drive, mild steel frame { Rigging Fee: $250 }

BMI 90 degree conveyor, 44 in. wide SS rod belt, overall 72 in. long x 72 in. wide, SS frame, with motor and drive { Rigging Fee: $150 }

Lot 44

Pan conveyor

Pan conveyor, 156 in. long x 30 in. wide x 36 in. tall, (2) 6 in. wide table top belts, SS bed, mild steel legs, motor and drive { Rigging Fee: $2...

Winkler 3 zone tunnel oven, 110 ft. long x 141 in. wide mesh belt, 3 baking zone, 300-450 degree range, (3) Eclipse 2.5m btu gas fired burners, (3...

Lot 46

Pan conveyor

Pan conveyor, 204 in. long x 6 in. wide plastic table top belts, 36 in. tall, with motor and drive, on casters, adjustable height { Rigging Fee: $...

CSF SS barrel pump, Type PA100AM-255-L/B.B2P10T40F, SN P034230, on SS cart { Rigging Fee: $200 }

Fedco 6 head depositor, Model SQ1424CA, SN 112, SS hopper 30 in. dia x 11 in. straight side x 23 in. cone, top agitation with washdown motor, tilt...

Lot 49

Belt conveyor

Belt conveyor, 23 ft. long x 24 in. wide x 37 in. tall, white plastic interlock belt, washdown motor and drive, SS frame, mild steel legs, on cast...

Decline pan conveyor, 28 ft. long x 4.5 in. wide plastic table top belts, 36 in. infeed x 24 in. discharge, motor and drive, aluminum bed, mild st...

Incline pan conveyor, 151 in. long x 6 in. wide SS table top belts, 35 in. infeed x 38 in. discharge, motor and drive, mild steel bed, SS legs { R...

90 degree incline pan conveyor, 7.5 in. wide SS table top belts, overall 144 in. long x 104 in. wide x 38 in. infeed x 52 in. discharge, aluminum ...

Pulver incline laning conveyor, 84 in. long x 68 in. wide, 30 in. wide lane, 52 in. infeed x 59 in. discharge, SS bed, mild steel legs { Rigging F...

Lot 54

Belt conveyor

Belt conveyor, 38 ft. long x 36 in. wide, grey plastic belt, with motor and drive, galvanized bed, with 90 degree SS rod infeed conveyor 36 in. wi...

Stewart Systems racetrack overhead cooling conveyor, 123 ft. long x 15 ft. wide overall, 7 tiers, 2 turns, approximately 5000 ft. of 20 in. wide b...

Incline belt conveyor, grey plastic belt, 57 ft. long x 36 in. wide, 60 in. infeed x 144 in discharge, galvanized bed, motor and drive { Rigging F...

Overhead belt conveyor, approximately 300 ft of belting, 36 in. wide, grey plastic belt, with motor and drive, galvanized bed, with (4) 90 degree ...

Incline belt conveyor, grey plastic belt, 165 in. long x 36 in. wide x 43 in. infeed x 53 in. discharge, Leeson wash guard motor and drive, galvan...

Alvey pan washer, SN W91132, 51 ft. long x 44 in. wide x 56 in. tall, SS omnigrid belt, 7.75 in. clearance, (2) Maxon Model 500 Size 515 gas fired...

90 degree conveyor, 36 in. wide SS rode belt, 68 in. long x 66 in. wide x 56 in. tall, SS legs, no motor and drive, aluminum frame, SS legs { Rigg...

SS 3-compartment sink, 93 in. wide x 30 in. deep x 37 in. tall, with backsplash { Rigging Fee: $100 }

SS 3-compartment sink, 93 in. wide x 30 in. deep x 37 in. tall, with backsplash { Rigging Fee: $100 }

SS single compartment sink, 24 in. x 24 in. x 37 in. tall { Rigging Fee: $75 }

Weldotron heat shrink tunnel, Model 7020, SN 0E20170B, aperture 16 in. wide x 10 in. tall, overall 76 in. long, on SS frame, on casters, missing b...

Goring Kerr metal detector, aperture 32 in. wide x 2.5 in. tall, missing screen, conveyor bed 65 in. long x 32 in. wide x 39 in. tall, missing bel...

Signode Gemini adjustable case taper, Model UCF-825-1, SN 88S02523, 110 volt, top and bottom tape heads, with tail tucker { Rigging Fee: $150 }

Shanklin heat shrink tunnel, Model T-72, SN T-93108, 460 volt, 3 phase, aperture 22 in. wide x 8 . 5 in. tall, wire mesh belt, 85 in. long tunnel,...

3M adjustable case taper, Model 800RF, Type 19000, SN 1019, 220 volt, top and bottom tape heads, with tail tucker, on casters { Rigging Fee: $250 }

Loading...Loading...
  • 469 item(s)
    /page

Recently Viewed Lots