2015 Adco high speed wrap around sleever, Model 9WM110PW, SN 5624, 460 volt, 3 ph., 3.25 in. plastic chain infeed, Fanuc Robot 6 axis placer, M-3i...

2015 GEA twinstar 8 spot tray sealer, SN 4047100314, 4 in. infeed x 12.5 in. discharge, Allen Bradley panelview plus 600, Busch R5 vacuum pump, D...

2015 FEMC conveyor system, Model 8100-124, SN 8666 vertical conveyor 13 ft. long x 24 in. tall conveyor, cleated belt 6 in. spacing x 3 in. deep, ...

FEMC 90 degree S turn conveyor, approximately 10 in .wide, overall 120 in. long x 94 in. wide, motor and drive, SS frame, belt and pully not pictu...

Paper Converting Machine Company Marlin Flex 4-lane crossfolder wet wipe line, Barry-Wehmiller Company, SN NG4178808, 34 in. maxium web width, sli...

FHS overhead crane system, 30 ft. long x 152 in. tall x 126 in. wide, (2) manual slide 2000 lb capacity jibs, (3) Harrington 1000 lb electric chai...

Uline impulse foot sealer, Model H89, 18 in. seal bar, foot operated { Rigging Fee: $25}

Patriot Automation round carton belly bander/wrapper, SN 10038710, single lane, 17 in. wide carton feeder, 6 in. wide x 32 in. tall belt infeed, m...

Patriot Automation round carton belly bander/wrapper, SN 10038712, single lane, 17 in. wide carton feeder, 6 in. wide x 32 in. tall belt infeed, m...

Patriot Automation round carton belly bander/wrapper, SN 10038712, single lane, 17 in. wide carton feeder, 6 in. wide x 32 in. tall belt infeed, m...

Stork texwrap TTS-TVS over-wrapper, Model STB-914VSTTSL, T914IVS-010, 16 in. tall vertical seal jaws, 7.5 in. wide belt infeed x 39 in. tall, mild...

Stork texwrap TTS-TVS over-wrapper, Model STB-914IVSTTSL, T914IVS-012, 16 in. tall vertical seal jaws, 7.5 in. wide belt infeed x 39 in. tall, mil...

Stork texwrap TTS-TVS over-wrapper, Model STB-914VSTTSL, T914IVS-011, 16 in. tall vertical seal jaws, 7.5 in. wide belt infeed x 39 in. tall, mild...

Stork Texwrap transfer conveyor, Model STE-SA359, SN SA0217, with Simco ionizing air blower, white vinyl belt, 60 in. long x 7.5 in. wide x 39 in....

Stork Texwrap transfer conveyor, Model STE-SA438, SN SA0215, white vinyl belt, 60 in. long x 7.5 in. wide x 39 in. tall, inverter duty motor, mild...

Stork Texwrap transfer conveyor, Model STE-SA438, SN SA0213, white vinyl belt, 60 in. long x 7.5 in. wide x 32 in. tall, inverter duty motor, mild...

Stork Texwrap radiant convection heat shrink tunnel, Model ST-822CM, SN T822CM-017, tunnel 60 in. long x 22 in. wide x 8 in. tall, SS mesh belt 92...

Stork Texwrap radiant convection heat shrink tunnel, Model ST-822CM, SN T822CM-018, tunnel 60 in. long x 22 in. wide x 8 in. tall, SS mesh belt 92...

Stork Texwrap transfer conveyor, Model STE-SA438, SN SA0214 , white vinyl belt, 60 in. long x 7.5 in. wide x 32 in. tall, inverter duty motor, mil...

Stork Texwrap transfer conveyor, Model STE-SA359, SN SA0218 , white vinyl belt, 60 in. long x 7.5 in. wide x 32 in. tall, inverter duty motor, mil...

Shanklin heat shrink tunnel, Model T-62, SN T-99214, tunnel 61 in. long x 19 in. wide x 10 in. tall, mesh conveyor belt 112 in. long x 15 in. wide...

Shanklin heat shrink tunnel, Model T-62, SN T84111, tunnel 60 in. long x 18 in. wide x 11 in. tall, 112 in. long x 15 in. wide x 34 in. tall, mild...

Weldotron heat shrink tunnel, tunnel 46 in. long x 22 in. wide x 13 in. tall, rod belt conveyor 69 in. long x 20 in. wide x 35 in. tall, digital t...

L-bar sealer, 16 in. wide belt, 28 in. long x 20 in. wide seal, 24 in. wide film stand, variable speed drive, SS frame, on casters { Rigging Fee: ...

2014 Multivac tray sealer, Model T200, SN 192165, 220 volt, 3 phase, with pallet of spare plates (2 pieces) { Rigging Fee: $50}

Autolabe labeler, Model 110-S LH REV E, SN 120007, Model 110-S, SN 110613, up to 6 in. wide film { Rigging Fee: $25}

Pallet of assorted Markem 9840 coders and parts, approximately 11 control boxes { Rigging Fee: $25}

Domino ink jet coder, Model A100+, SN W1A06931, 100-120 volt/200-240 volt, with head, on SS cart { Rigging Fee: $25}

Domino ink jet coder, Model A100+, SN W1A06930, 100-120 volt/200-240 volt, with head, on SS cart { Rigging Fee: $25}

2003 Econoseal case packer, Model 7607, SN 8035, 220 volt, 1 ph., on casters (2 pieces) { Rigging Fee: $100}

2003 Econo seal cartoner, Model 7512, SN 8034, 220 volt, 1 ph., side infeed 5 in. long x 6 in. wide spacing, 5.5 in. lug spacing { Rigging Fee: $1...

MGS Machine Corporation 3-lane rotary feeder, Model RPP-433DB, SN 10078, 4 in. wide lanes, 230 volt, 3 ph., 20 amp, Becker vacuum pump, mild steel...

3M-Matic 22A adjustable case sealer, Model 18500, SN 1535, top and bottom tape heads, mild steel frame, on casters { Rigging Fee: $25}

3M-Matic 12AF adjustable case sealer, Model 48800, SN 1811, top and bottom tape head, mild steel frame { Rigging Fee: $25}

Caldwell overhead crane system, electric chain hoist, manual travel, 750 lb capacity { Rigging Fee: $50}

Pasteurizing control skid, 40 spot hydraulic press with hydraulic power pack, (2) Anderson AV-9000 chart recorders, Allen Bradley panelview 550, (...

BULK BID OF CONVEYOR LOTS 95-110, THE BULK BID WILL BE OFFERED CONDITIONAL, SUBJECT TO THE SUM OF THE INDIVIDUAL LOTS AND AWARDED SOLD INDIVIDUAL ...

M-tech belt conveyor, blue vinyl belt, 138 in. long x 7.75 in. wide x 37.5 in. tall, AB poweflex 40 vfd (0.5 hp), SS frame, motor and drive ** THE...

M-tech incline conveyor, blue vinyl belt 57 in. long x 7.75 in. wide x 38 in. infeed x 57 in. discharge, SS frame ** THE INDIVIDUAL BID WILL BE OF...

M-tech incline conveyor, blue vinyl belt 103 in. long x 7.75 in. wide x 57 in. infeed x 38 in. discharge, SS frame, 2 vfds ** THE INDIVIDUAL BID W...

M-tech compression conveyor, 67 in. long x 7.25 in. wide x 38 in. tall, powerflex 40 vfd ** THE INDIVIDUAL BID WILL BE OFFERED CONDITIONAL, SUBJEC...

M-tech conveyor, white plastic interlock belt, 174 in. long x 4 in. wide x 37 in. tall, vfd adjustable rails and legs, motor and drive, SS frame *...

M-tech conveyor, white plastic interlock belt, 117 in. long x 4 in. wide x 37 in. tall, vfd adjustable rails and legs, motor and drive, SS frame *...

M-tech conveyor, white plastic interlock belt, 170 in. long x 4 in. wide x 37 in. tall, 2 vfd adjustable rails and legs, motor and drive, SS frame...

M-tech conveyor, white plastic interlock belt, 117 in. long x 4 in. wide x 37 in. tall, adjustable rails and legs, motor and drive, SS frame ** T...

M-tech 90 degree belt conveyor, white vinyl belt, 12 in. wide belt, 41 in. long, 49 in. tall, motor and drive ** THE INDIVIDUAL BID WILL BE OFFERE...

M-tech conveyor, white plastic interlock belt, 141 in. long x 8 in. wide x 33 in. tall, vfd adjustable rails and legs, motor and drive, SS frame *...

M-tech 90 degree S conveyor, white plastic interlock belt, 4 in. wide x 33 in. tall, overall 125 in. long x 60 in. wide, vfd adjustable rails and ...

M-tech 90 degree conveyor, white plastic interlock belt, 5 in. wide x 33 in. tall, overall 76 in. long x 40 in. wide, vfd adjustable rails and leg...

M-tech 90 degree conveyor, white plastic interlock belt, 4 in. wide x 33 in. tall, overall 240 in. long x 78 in. wide, vfd adjustable rails and le...

M-tech converging conveyor, 187 in. long x 4 in. wide x 38 in. tall, pneumatic reject system, adjustable rails, vfd, motor and drive, conveyor tha...

M-tech 90 degree conveyor, white plastic interlock belt, 4 in. wide x 33 in. tall, overall 210 in. long x 28 in. wide, vfd adjustable rails and le...

Dorner incline conveyor, white plastic cleated belt, 108 in. long x 19.5 in. wide x 18 in. infeed x 45 in. discharge, cleats 20.5 in. long x 3 in....

Dorner transfer conveyor, 36 in. long x 8 in. wide, no legs, 1 missing belt { Rigging Fee: $25}

9 lane magazine conveyor, 77 in. long x 2.25 in. wide x 35 in. tall, SS/mild steel frame, motor drive { Rigging Fee: $50}

Belt conveyor, 120 in. long x 24 in. wide x 36 in. tall, mild steel frame, motor and drive, { Rigging Fee: $50}

9 lane magazine conveyor, 114 in. long x 2.25 in. wide x 37 in. tall, SS/mild steel frame, motor drive { Rigging Fee: $50}

Alum-a-lift electric lift, SN 120812432A, 300 lb load limit, on board charger, on casters { Rigging Fee: $25}

Manual slide hopper, poly insert hopper 40 in. long x 31 in. wide x 37.5 in. tall, SS frame { Rigging Fee: $25}

IKA 2000 series centrifugal pump, 10 hp, 1.5 in. in/out { Rigging Fee: $25}