180 degree conveyor frame and drive, 20 in. wide, missing belt, 90 degree conveyor, 14 in. wide belt, 102 in. long overall, motor and drive ** Rig...

SS conveyor, 56 in. long x 15 in. wide, SS wash-down motor and drive ** Rigging Fee: $50 **

Nercon dual conveyor, table top belt, 64 in. long x overall 18 in. wide belts, missing motor and drive, SS frame, (1) 96 in. long x 7.5 in. wide t...

(2) pieces of Sidel SS conveyor 14 ft. long x 15 in. wide, missing belt ** Rigging Fee: $75 **

2004 Douglas case packer, Model CP8712, SN M103087, Allen Bradley panelview plus 1500, Nordson Problue 10 glue pot, control panel, (2) powerflex 4...

SS laning decline conveyor, 175 in. long x 60 in. wide x 54 in. infeed x 37 in. discharge, motor and drive ** Rigging Fee: $100 **

SS conveyor, 196 in. long x 60 in. wide, motor and drive, no legs ** Rigging Fee: $200 **

Woods SS dual lane table top conveyor, 84 in. long x 10 in. wide each, motor and drive, on casters ** Rigging Fee: $50 **

Wire chain conveyor, 90 in. long x 24 in. wide, motor and drive, carbon steel, on casters ** Rigging Fee: $50 **

SS incline conveyor, 144 in. long x 50 in. wide x 41 in. infeed x 52 in. discharge, motor and drive, adjustable legs ** Rigging Fee: $100 **

Arcall conveyor, 92 in. long x 11 in. wide, SS wire link belt, SS frame, missing motor and drive, on casters ** Rigging Fee: $50 **

Incline conveyor, 144 in. long x 16 in. wide x 36 in. infeed x 46 in. discharge, motor and drive, SS frame, carbon steel legs, on casters ** Riggi...

BMI SS incline conveyor, 84 in. long x 18 in. wide x 30 in. infeed x 52 in. discharge, flighted belt, 6 in. spacing x 1.5 in. tall, motor and driv...

BMI conveyor 72 in. long x 17 in. wide, motor and drive, missing belt, legs on one end ** Rigging Fee: $50 **

Allen vibratory conveyor, Model D26169, Type C, SN CON15182, 84 in. long x 32 in. wide x 40 in. tall ** Rigging Fee: $50 **

Key Impulse vibratory conveyor, Model 436205-1, SN 07-179399, 88 in. long x 36 in. wide x 30 in. tall, SS bed and frame ** Rigging Fee: $100 **

Key Impulse vibratory conveyor, Model 436204-1, SN 07-179398 , 142 in. long x 36 in. wide x 36 in. tall, SS bed and frame ** Rigging Fee: $200 **

Meyer vibratory conveyor, Model MFN-L130/1, SN 153, 72 in. long x 24 in. wide x 48 in. tall, SS bed ** Rigging Fee: $100 **

Electric Metal Fab table top conveyor, 48 in. long x 10 in. wide x 25 in. tall, SS frame, motor and drive ** Rigging Fee: $50 **

Carbon steel wire bar conveyor, 52 in. long x 16 in. wide, motor and drive, on casters ** Rigging Fee: $50 **

BMI conveyor, 80 in. long x 30 in. wide x 68 in. tall, carbon steel frame, motor and drive, adjustable incline on one end ** Rigging Fee: $50 **

Lot of Hytrol powered roller conveyor, (1) S turn, (2) 90 degree section, 2 straight sections, with 2 motors and drives, approx. 40 ft. ** Rigging...

SS incline conveyor, 208 in. long x 10 in. wide x 34 in. infeed x 72 in. discharge, SS wash-down motor and drive, missing belt ** Rigging Fee: $15...

Incline conveyor, 120 in. long x 12 in. wide x 25 in. tall hopper infeed x 83 in. discharge, carbon steel frame, belt is no good, motor and drive,...

U-MEC SS incline conveyor, 128 in. long x 12 in. wide x 37 in. hopper infeed x 84 in. discharge, flighted belt 12 in. spacing x 1 in. tall, motor ...

SS conveyor, 126 in. long x 12 in. wide x 39 in. tall, motor and drive, SS hopper, on casters ** Rigging Fee: $50 **

2 pieces of SpanTech SS conveyor parts, 9 in. wide and 24 in. wide, both incomplete ** Rigging Fee: $100 **

Arrowhead 90 degree table top conveyor, 4.5 in. wide belt, 96 in. long overall x 33 in. tall, missing motor and drive, adjustable legs ** Rigging ...

SS S-curve conveyor, 120 in. long x 6 in. wide x 32 in. tall, motor and drive, speed controller ** Rigging Fee: $50 **

Belt conveyor, 112 in. long x 23 in. wide x 36 in. tall, motor and drive, adjustable legs, carbon steel frame ** Rigging Fee: $50 **

Gravity roller conveyor, 116 in. long x 16 in. wide x 24 in. tall, carbon steel frame ** Rigging Fee: $50 **

Powered roller conveyor, 180 in. long x 15 in. wide rollers, missing motor and drive ** Rigging Fee: $100 **

The Bauer pan greaser, 22 in. wide belt ** Rigging Fee: $75 **

Wexxar case erector and bottom taper, Model WFT, SN 1262, incomplete ** Rigging Fee: $200 **

IAG needle denester, last used on bun line ** Rigging Fee: $200 **

SS die holder, adjustable height, on casters ** Rigging Fee: $50 **

1978 Demaco extruder, Model C001, Job no 25304, 25 hp, 25 hp PowerFlex 70 vfd, last used for bagels extruding dough ** Rigging Fee: $200 **

Raccordia fat pump, Model MCE 55_4/AF_MY_72, SN M031232/M031230, PowerFlex 70 vfd, (2) PowerFlex 4 vfds, Waukesha 064 pd pump, SN 211905-97, 5 hp ...

OK Corporation liner inserter, Model C348-98, SN 06-1537, 24 in. roll plastic, (3) PowerFlex 4 vfds, Allen Bradley panelview plus 600 touch screen...

1999 Saiet trivi flatbread laminating line, 48 in. wide, including; overhead dough chunker with infeed conveyor, spare dough chunker, extruder, du...

Conveyor with laner, 115 in. long x 17.5 in. wide x 34 in. tall, carbon steel ** Rigging Fee: $50 **

3M Matic top and bottom case taper, Model 800a, Type 39600, SN 5118M, missing both heads ** Rigging Fee: $50 **

3M Matic case taper, Model 800a, Type 39600, SN 5169M, bottom only, missing head, on casters ** Rigging Fee: $50 **

Greenheck SS 36 in. roof cover, Model GRSR-36, SN 04J04475 ** Rigging Fee: $25 **

Creamery Package insulated tank, SN 6664, 44 in. dia x 35 in. tall, slant bottom, sbo outlet ** Rigging Fee: $75 **

PBS positive bagging system bagger, SN 1028 ** Rigging Fee: $200 **

Hand pack cartoner, single push, 4.5 in. x 5 in. infeed, SS frame ** Rigging Fee: $200 **

Rondo 5 station sheeting line, Model PQC613333, SN A5113002, 24 in. SS rolls, SS frame, on casters ** Rigging Fee: $250 **

Rondo 5 station sheeting line, frame only, SS frame ** Rigging Fee: $150 **

REMOVED FROM AUCTION

Shick SS ingredient station, Shick rotary air lock, 9 in. vein, SS hopper, 42 in. x 42 in. x 30 in. tall ** Rigging Fee: $150 **

Vibratory conveyor, 40 in. long x 6.5 in. wide with SS hopper ** Rigging Fee: $25 **

Tennant walk behind floor scrubber, Model SS2701, SN SS27100009691GT, 24 volt ** Rigging Fee: $50 **

Minuteman walk behind floor scrubber, Model E26, 24 volt ** Rigging Fee: $50 **

Factory Cat walk behind floor scrubber, Model 2800, SN 43554 ** Rigging Fee: $50 **

Factory Cat walk behind floor scrubber, Model 3400, SN 40615, 24 volt, missing batteries ** Rigging Fee: $50 **

Marlen 2 piston dough pump, Model 629, SN 629484, SS frame and hopper, on casters ** Rigging Fee: $150 **

Metalchek metal detector, 20 in. wide x 9 in. tall aperture, 72 in. long x 18 in. wide belt, ** Rigging Fee: $150 **

Koppens waterfall applicator and conveyor, Type EPR600, ER 600-218-HD, 80 in. long x 24 in. wide, centrifugal pump, SS frame, missing belt ** Rigg...

Loma metal detector, SN 894443, 10 in. wide x 25 in. tall aperture, 84 in. long x 7 in. belt, motor and drive, reject push, SS frame ** Rigging Fe...