Savage model S92 Warrior natural gas fired Firemixer, 24" diameter x 12" deep copper kettle, single action agitator with scrapers, cream of tartar...

Savage model S92 Warrior natural gas fired Firemixer, 24" diameter x 16" deep copper kettle, single action agitator with scrapers, cream of tartar...

Savage #33 natural gas fired candy stove, serial#609, 135,000 btu's, with rings for smaller kettles with 22" diameter x 12" deep copper pot with (...

Pitco model 35C+SS Basket Fryer, natural gas fired, two baskets, serial#G02G023096, 90,000 btu/hr. Rigging $200.00. Skidding and crating are addit...

Hobart model M802 80-quart vertical mixer, 4-speed, timer, 3 HP, 3 phase, 60 cycle, 200 volt motor with (2) SS bowls, (2) flat beaters, wire whip ...

Stephan model VCM60E Stainless Steel Vacuum, Jacketed Cutter/Mixer, serial#725362.01, two speed motor, 1690/3360 rpm, 11/15 HP, 3 phase, 60 cycle,...

Mills 3 x 8 ft carbon steel water jacketed cold table, 30" tall with mixing valves. Rigging $250.00. Skidding and crating are additional. ...[mor...

Mills 3 x 8 ft carbon steel water jacketed cold table, 30" tall with lot of bars, with mixing valves. Rigging $250.00. Skidding and crating are ad...

Vent hood stainless steel - 20ft long x 6ft deep. Rigging $1700.00. Skidding and crating are additional. ...[more]

Cardinal digital floor scale with 28" x 19" platform, model 8852-204 with capacity 1000 x.5 lb, on casters. Rigging $250.00. Skidding and crating ...

Werner Lehara 24" Wire-Cut Candy Extruder, rolls not jacketed, serial#1-16390, filler block with (14) approx. 1-1/8" diameter holes, (14) outlet d...

Prefamac 24" Enrobing Line with 6-ft long wire mesh belt infeed conveyor, Sollich BEM 620 mm pre-bottomer with 9-ft long cold plate conveyor water...

Nielsen AEN-750 750 kg/hr Tempering Unit - Model AEN-750 - Serial # 990925-1 built new in 1999 - Output 400kg-750kg per hour - Water cooled - Four...

Sollich UT500-F 500 kg/hr screw type tempering unit with built-in freon compressor, temperature controls. Rigging $250.00. Skidding and crating ar...

Prefamac 2000 kg (4400lbs) Stainless Steel Chocolate Melter with agitator and water jacketed with electric immersion heater, digital temperature c...

Awema One Shot Depositing line with model UDM-202 One Shot Depositor, built 1997,serial#52689, 3 phase, 208 volts was running molds 410 x 230 mm m...

Sollich ST750K 750 kg/hr tempering unit, screw type, water jacketed and cooled. Serial#0428, built 1963. Rigging $250.00. Skidding and crating are...

Mikrovaerk Chocolate Molding Plant – Solid Bars with Inclusions - 670 x 305 molds (about 14 mold sets come with the line) - Output: 8 to 10 molds/...

Carle Montanari Tan 25 Screw Type Tempering machine - 3 stage tempering unit - Water Cooled. Rigging $375.00. Skidding and crating are additional....

Prefamac 2000 kg (4400lbs) Stainless Steel Chocolate Melter with agitator and water jacketed with electric immersion heater, digital temperature c...

Collmann Hydo-12 Hollow Molding Line with hand fed pre-formed foil molds, mold heater, Two depositors, continuous spinning, with cooling tunnel se...

(4) Kalpert foil molding machines. Rigging $9500.00. Skidding and container loading is additional. ...[more]

Sollich UT500-F 500 kg/hr screw type tempering unit with built-in freon compressor, temperature controls, serial#0982 built 1973. Rigging $250.00....

Bindler 2000 kg carbon Steel Chocolate Tank approximately 42" diameter x 67" tall inside, jacketed and agitated, electric immerson heater with Cho...

Ben Moore 500-lb Stainless Steel water jacketed and agitated chocolate tank with electric immersion heater. Inside dimensions 24" diameter x 30" d...

Ben Moore 250-lb Stainless Steel water jacketed and agitated chocolate tank with electric immersion heater. Inside dimensions 18" diameter x 30" d...

Thomas Mill 6" wide two roll nut grinder with 1/4" spacing on teeth, 1 HP, 115/230 volt motor.  Rigging $175.00. Skidding and crating are addition...

Sapal model BI-e high speed foil wrapper for chocolates with belt infeed, electric eye for printed registration, hot melt system with glue gun, cu...

Sapal model BI-e high speed foil wrapper for chocolates with belt infeed, electric eye for printed registration, hot melt system with glue gun, cu...

Sapal model BI-e high speed foil wrapper for chocolates with belt infeed, electric eye for printed registration, Hot melt system with glue gun. Cu...

Verpackundgsmachinen Chocolate Cigar wrapping machine with cellophane overlap and paper cigar band from pre-cut label. Rigging $1050.00. Skidding ...

Rasch model RU-F hand fed foil wrapper with electric eye for print registration, pre-cut magazine for applying band with hot melt glue and vacuum ...

Rasch model RUDC Double Twist wrapper for chocolates, hand fed feed plate, 8-station, double twisters, discharge belt. Serial#2701. set for a piec...

Ulma Chocolate Bar Wrapper with foil from roll and labels from pre-cut stack, set for a bar measuring approximately 7" long x 2" wide, belt infeed...

Sapal Multi Style Chocolate Wrapper set for Double Twisting a chocolate ball measuring approximately 1" diameter. Hand fed infeed with special hol...

Rasch model RUBESTZ Foil Wrapper for Chocolate balls and eggs. Hand fed with rolling attachment, and set for an egg measuring about 1-3/4" wide x ...

Doboy Mustang Horizontal Flow Wrapper serial#76-12166 with two-up cutting head with 7" wide jaws, 5-ft lug infeed with flat top chain on 11" lug c...

Superior model 20 Hand Load Hot Melt Cartoner with carton magazine, carton pre-breaker, 6-ft long hand loading area, embossing coder, Nordson hot ...

Heat Seal Equipment L-Bar Sealer with 16" x 20 sealing area with discharge belt with Heat Seal Shrink tunnel with roller bar conveyor with 20" wid...

12" wide x 36-ft long x 36" tall packing conveyor. Rigging $700.00. Skidding and crating are additional. ...[more]

16" wide x 30-ft long x 36" tall packing conveyor on casters. Rigging $700.00. Skidding and crating are additional. ...[more]

Scotch 3M model 22A-18500 Top and Bottom case Taper with bottom belts and adjustable length skate infeed conveyor, 115 volts. Rigging $750.00. Ski...

Inclined 10" wide conveyor starting 8" from floor, 44" dump height and 6-ft long with 44" diameter accumulating table. Rigging $350.00. Skidding a...

Triangle Form Fill and Seal machine with 3-Linear weighers, sealing jaw with hole punch with Bucket elevator, 9" wide hole punch and 4.5" wide fla...

Rasch model RUEA2 Foil Wrapper for balls and eggs with stringing attachment, rolling attachment, electric eye, Herma label applicator. Set for an ...

Rasch model RU hand fed chocolate foil wrapper, electric eye for film registration, set for turkey shaped chocolate piece, discharge belt.. Riggin...

Kuhl CFW-400 Mold Washer with 11'"wide belt. Overall dimensions 2 ft x 11 ft. Hydro Therm Gas fired boiler is included. Rigging $2200.00. Skidding...

Aqua Products Model CDR-120C-S2S water chiller, 460 volts. Rigging $300.00. Skidding and crating are additional. ...[more]

Bradford White Hot Water Heater, 98 gallon, gas fired. New 2013. Rigging $300.00. Skidding and crating are additional. ...[more]

Rheem 76 Gallon gas fired Hot Water heater built 2007.. Rigging $350.00. Skidding and crating are additional ...[more]

Ingersoll-Rand Air Compressor with Intellisys controls. Rigging $150.00. Skidding and crating are additional. ...[more]

Sullair ES-8 Dryer. Rigging $150.00. Skidding and crating are additional. ...[more]

Dominick Hunter Eco-Smart Commpressed Air dryer. Rigging $150.00. Skidding and crating are additional. ...[more]

Royal #5 dry gas fired dry Roaster with perforated drum, gas burner. Rigging $150.00. Skidding and crating are additional. ...[more]