Cambio 75A 27" Debarker, S/N 66203; 75 HP 575V, Top & Bottom Tire Rolls; Control shack & controls; Waste Conveyor, 15" x 36', flighted long link c...

4 Run Log Transfer Deck, 27’L x 12’1"W, H78 Chain

10 HP Motor w/ Radicon Reducer

Belt Conveyor, 24"W x 21’6"L

Log Bunk, 11'W x 12'L

4 Run Log Transfer Deck, 12'7" x 18’6"L WITH KICKERS

15HP Motor & Radicon No. 5 Reducer ...[more]

{ Group of lots: 10, 11 } Spiked Hourglass Rollcase, 36"W x 60' ; (19) Rolls; w/ 89' x 36" grate steel catwalk, railing & stairs

{ Group of lots: 10, 11 } 6 Roll Hourgiass Rollcase, 30.5" x 25'

15 HP Motor & Reducer, 575V ...[more]

Log Infeed Operator Console

4 Run Head Rig Infeed Transfer, 12'7" W x 16'6"; w/ Drive

Debarker Waste Conveyor, 15" x 62'; Flighted long link chain

10HP Motor, 575V; w/ Falk 74.48 Ratio Reducer, 1750 RPM

Morbark Circular Saw Head Rig, Modular; 4’6” Diameter Blade; 16’ 4 Bunk Carriage; 150HP Drive; S/N 1274; Operator booth, controls & setworks; w/ 3...

50HP Hydraulic Power Unit, & reservoir, 575V ...[more]

Allen-Bradley 3 Section, 2 Sided MCC (as-is)

{ Group of lots: 23, 24 } PLC Cabinet (as-is)

{ Group of lots: 23, 24 } Service Breaker Panel (as-is)

Marcus 40KVA transformer, 600-120/208V; (as-is)

PHL Horizontal Twin Scragg Saw, Model S 110, (2) 48" blades; S/N SJB 63 ER; 75HP; Spiked holdown infeed & outfeed holddown rolls; 20" flat chain t...

25HP Hydraulic Power Unit, 575V

20HP Hydraulic Power Unit, 575V

{ Group of lots: 31, 39 } Scragg Outfeed Belt Conveyor, 18"W x 51’L

7.5HP Motor & Reducer ...[more]

Winged box chain waste conveyor below scragg, 18" x 40'

{ Group of lots: 35, 36 } 5 Run Log Transfer Deck, 15’6”W x 38’L; H78 Chain; w/ head & tail shaft

{ Group of lots: 35, 36 } 5 Run Log Transfer Deck, 15’W x 22’L, H78 Chain; (Excluding common head shaft)

25 HP Drive; 575V

6 Strand Unscrambler; 20'3" x 9'H Pyramid Flights; w/ drive

All catwalk, railings & stairs in scragg & outfee areas ...[more]

Salem Optimized Gang Edger, S/N 91695, (2) 200 HP Drives; 27" & 43" Feed lines, each w/ knurled top & bottom rolls; Temposonic optimization ...[m...

(5) Laser Guides

5 Run Transfer Deck, 16’W x 14’L, (From PHL Line)

Double Edger Infeed Rollcase Transfer; (2) Runs 27” & 43” Splined Rolls x 19’6"L; Each run w/ (4) 30" & (4) 48" cross jump chains w/ air bags; fee...

52” x 51’ Rollcase, 9 of 15 Rolls w/ Half Spiral; (6) Smooth rolls; w/ drive

5 Run Lumber Transfer Deck, 15’6"W x 28’L, H78B chain (From head rig); w/ drive

Edger Control Booth, 10'6" x 7'7" ...[more]

Edger & feed controls & PLC in booth ...[more]

7 Section MCC, 21 Full Buckets

HD Steel Protection Plate, front of edger booth, 6'H x 12'W ...[more]

Incline Pocket Edger, Single Arbor w/ (2) 24" Saws; 75HP 1780 RPM 575V; w/ Angled Feed system & holddown system; w/ 7 Run Infeed Transfer, 8'6"L x...

Adjustable Powered Knurled Pinch Rolls; 26"; w/ adjustable cylinder & drive ...[more]

Pocket edger Infeed Belt Conveyor, 12" x 18'L,

Pocket Edger Outfeed Belt Conveyor, 82'L Overall; Comprised of (2) Belts, 16" x 31'L & 11" x 51' ...[more]

20HP Hydraulic Power Unit, w/ Reservoir

Double Outfeed Rollcase Transfer, (2) Runs Of Side By Side Offset Rolls, 48”W x 19’6”L

5 Run Lumber Transfer Deck, 15'W x 21’L, H78B Chain; w/ end stop; full steel deck

10 HP Motor, 1765 RPM 575V; w/ Radicon reducer

6 Run Lumber Transfer Deck, 15'W x 13’L, H78B Chain; w/ end stop & hydraulic drop gate ...[more]

5 HP Motor, 575V w/ reducer

Operator Console

Lot of spare edger blades ...[more]

19' Hydraulic Drop Gate & slide ...[more]

Return Belt Conveyor, 15" x 43', w/ drive

(4) Foot Pedals

6 Run Lumber Transfer Deck, 17'6"W x 30’L, H78B Chain

10HP Motor, 1745 RPM 575V; w/ Radicon 31:1 reducer

4 Section MCC

Double Valley Trim Saw System, w/ (10) Run 40’L Transfer Deck, 20 HP, Left & Right Trim Saws, 3,500 RPM; H78 Chain; (8 Roll) 9’ Even ending roll l...