50-Ton CO2 Tank. Praxair. With relatively new Refrigeration package by TRENTON. With Tomco Vaporizer. With Praxair Remote Telemetry Tracking Syste...

583 Ton, 7010 MBTU/hr Condenser. EVAPCO. MDL: PMC-778E. S/N: 196564530. OD = 16 x 12 x 16'H. Top section is 7'H. Bottom section is 9'H. Tubes are ...

740 Ton, 8,889.9 BTU/Hr. Condenser. Frick. Mdl: XLP2- 1210-352. OD= 16' x 10' x 16'H. Top section is 7'H. Bottom is 9'H. Tubes are nearly clear of...

836Ton, 10,032 MBTU/Hr Condenser. FRICK. MDL:XLP2-1218-1075 S/N: U163031701-01-01. OD = 16 x 12 x 16'H. Top section is 7'H. Bottom section is 9'H....

EVAPCO ~690 Ton Ammonia Condenser. Already off the roof.  Mdl: PCMB 690. S/N: 5-129609. Minimal scale on tubes. Fan unit is 18' x 10' x 8'H. Tube ...

200 ton CAT Shell and Tube Water Chiller 30'L x 40" Dia. Mdl 2820. (Called "Rechiller" by C.A.T.) (26) 2.5" Dia. Tubes are 28' long in cold. Shell...

200 ton CAT Shell and Tube Water Chiller 30'L x 40" Dia. Mdl 2820. (Called "Rechiller" by C.A.T.) (26) 2.5" Dia. Tubes are 28' long in cold. Shell...

Turbo Plate Chiller. 7 plates. Approx. 150 gpm. Plates are 7' L x 55"H. Cabinet is good and straight. MDL: HTDA 961207. S/N A8435200 OD = 122" x 7...

Plate Chiller with insulated 2" thick cabinet. Mounted in insulated panel room on roof. TURBO. 13 plates are 8'L x 5'H. Produced 185 gpm cold wate...

Evapco Ammonia Accumulator on roof beside plate chiller and C.A.T. Chillers. Insulated. Horizontal. With valves. With 9" x 3' pressure tank.  Ammo...

MYCOM 400HP ammonia Compressor. Has been disconnected and welded caps added except for top flanged pipe. Compressor is Mdl: 250 VMD. S/N 2535548. ...

Heavy Duty Vice. 6" Jaws. 21" L closed. Works smoothly. OD" 21.5" x 8" x 9.5"H. SOLD AS IS FOB Decatur, AR. The "Rigging/Removals" Tab below the p...

Lot of two section of 12"L S/S 10" diameter screw conveyor. Includes screw and trough. Trough is flanged both ends. Center shaft is 1/2 material 3...

Bulk Lot Condenser Treatment Tank and Pumps. Includes Lots 438 though 442. This lot must have higher bid than the sum of those 5 lots in order to ...

Thick walled water supply tank and treatment tank. Tank is 13' x 65" x 60"H. OD = 13' x 65" x 79"H. Tank may have to be cut to be removed. SOLD AS...

Mycom 150HP Reciprocal Compressor. 8 Cyl. MDL: N8 WB. Skid mounted. Complete package with all pressure data plates. Oil Separator is 29" x 20" x 4...

Mycom 125HP Reciprocal Compressor. 6 Cyl. MDL: N6B. Skid mounted. Complete package with all pressure data plates. Oil Separator is 13"dia x 48"H....

Master Oil Scrubber. Tank is 42" dia x 88"H. With all components. NB# 4424. 250psi @ 300^F. OD= 66" x 62" 135"H. SOLD AS IS FOB Decatur, AR . Load...

Mycom 350hp Ammonia Screw compressor with Quantum HD touch Screen Controls. Mdl: 200VLD. Unit was in use when plant closed. With all pressure data...

Frick 325HP Ammonia Screw Compressor with Quantum HD Touch Screen Controls. Compressor Mdl: S601918. Unit Mdl: RWF11 134. 2016 model. OD = 229L ...

RECO 250hp Ammonia Screw Compressor with Frick Compressor. Frame mounted. Compressor Mdl is 200 SUD-L7. With all pressure data plates. Unit was i...

RECO 250hp Ammonia Screw Compressor with Frick Compressor. Frame mounted. Compressor Mdl is 200SUD-L7. With all pressure data plates. Unit was in...

All Cutler Hammer Motor Controls in compressor room East wall and NE corner of North wall, as shown in photos. (Note: plant may choose to keep tw...

20'L x 4'Dia Ammonia Receiver. Used recently built pumped down. Approx. 9.5'H. Sold AS IS FOB Decatur AR. Loading must be coordinated with Crane a...

Ammonia Accumulator A. Insulated. Used recently built pumped down. 5' Dia x ~15'H. OD with valves = ~ 13' x 6' x 15'H. Sold AS IS FOB Decatur AR. ...

Ammonia Accumulator B. Insulated. Used recently built pumped down. 4' Dia x ~13'H. OD with valves = ~ 11.5' x 68" x 13'H. Sold AS IS FOB Decatur A...

MYCOM 250HP Ammonia Screw Compressor with Frick Quantum HD Touch Screen Controls. 460V motor. Mdl: 200 SUU-LX. Frame mounted complete compressor p...

Mycom 150HP Reciprocal Compressor. 8 Cyl. MDL: N8 WB. Skid mounted. Complete package with all pressure data plates. OD= 94" x 56" x 71"H. In use w...

Ammonia Recirculation Package (In Ice Area) including: 1) Vertical 8' x 44" Dia insulated tank. 2) All valving. 3) Ammonia pump with motor. OD of ...

30 Ton per day  Frick tubular ice maker (TIM)  with 84"H x 24" dia. ammonia accumulator. Ice is formed inside of tubes and released with hot gas o...

30 Ton per day ice maker. Ice is formed outside of tubes. Thickness is control adjustable. 15) 4" dia tubes on each side. OD of frame-mounted ice ...

30 Ton per day ice maker. Ice is formed outside of tubes. Thickness is control adjustable. 15) 4" dia tubes on each side. With Insulated accumulat...

TURBO Plate Chiller in insulated S/S cabinet. 7 S/S plates 48" L x 50"H. Was producing 170 gal of cold water per minute. Chiller will include 2) 3...