Refine your search
Primary Category
Category
Brand
Item Type
- Spindle (4)
- CNC Machining Center (3)
- Chuck (3)
- Machining Center (3)
- Vertical Machining Center (3)
- Chiller (2)
- Crane (2)
- Feed (2)
- Hoist (2)
- Jib Crane (2)
- Pump (2)
- Shrink Wrap (2)
- Shrink Wrap Machine (2)
- Tooling (2)
- jib (2)
- 3 Axis (1)
- Air Compressor (1)
- Air Dryer (1)
- Ballscrew (1)
- Bandsaw (1)
- Centrifugal Pump (1)
- Chip Conveyor (1)
- Collet (1)
- Compressor (1)
- Control Panel (1)
- Cross Slide (1)
- Dryer (1)
- Engine Lathe (1)
- Filtration System (1)
- Gauge (1)
- Generator (1)
- Lathe (1)
- Mill (1)
- Power Supply (1)
- Refrigerated Air Dryer (1)
- Reservoir (1)
- Roll Former (1)
- Saw (1)
- Screw Compressor (1)
- Tank (1)
- Taper (1)
- Temperature Control (1)
- Tube Bender (1)
- Ultrasonic Cleaner (1)
- former (1)
State/Province
- List
- Grid
-
21 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
Saro SPA 1000x5000 Manual Engine Lathe Description Swing Over Bed: 39.37 in (1000 mm)Distance Between Centers: 196.85 in (5000 mm)Swing Over Cro...
Avtech AV-151D-B (2014) High-Voltage Function Generator / Linear Amplifier Description Pulse width range: 0.5 ns to 0.5 sFrequency range: 1 Hz t...
Atlas Copco FX27ON Air Dryer (2022) Description Type: Non-cycling Refrigerated Air Dryer 460 V - 3 Ph - 60 hZ 572 CFM @ 100 PSI - 2.5" NPT Ste...
Atlas Copco Dryer CD65 (2020) Description Dessicant Dryer - 115V/1 Ph / 60 hZ 138 CFM @ 100 PSI - 1" NPT Pressure Dew point -40 defrees Fahrenhe...
Atlas Copco Air Compressor G5P-145 (2024) Description Type: 7.5 hp fixed speed oil-injected rotary screw compressor Oil injected Screw Compres...
AOTISEN ATX15-AF Chiller (2022) Description CAN ONLY LOAD FROM DOCK HEIGHT Cooling Capacity: 44.15 kW Temperature Control Range: 5–35°C Refrig...
Mitsubishi ML3015NX C02 Laser (2010) Description Laser Type: CO2 Power Output: 4500W Table Size: 5' x 10' Machine Structure: Flying Optics ...
Fryer MC-30L Vertical Machining Center (2020) Description X TRAVEL - 30" Y TRAVEL - 20" Z TRAVEL - 20" BALLSCREW SIZE - 1.57" TABLE LOAD (EVENL...
Ultrasonic Cleaner Omegasonics Pro Plus X3 (2012) Description Ultrasonic Power: 2000 Watts Peak Tank Capacity: 33 gallons Tank Dimensions: 24” x...
Thermo Fisher Scientific ThermoFlex 24000 Chiller (2012) Description Cooling capacity: Up to 24,000 W (81964 BTU) Temperature range: +41°F to ...
Elumatec SBZ 122/20 Vertical Machining Center (2004) Description Aluminum Architectural Machine to mill and drill long narrow parts. Table Ca...
Hubbell Jib Crane 2 Ton (2009) Description Lift Height: 13' Hoist: 2 Ton Capacity Equipped With Hoist
Hubbell Jib Crane 3 Ton Hoist (2008) Description Capacity: 3 Ton 13 ft Lift Height Equipped With 3 Ton Hoist
Lantech Shrink Wrap Machine Q-300 (2008) Description Turntable: 99" Tower Height: 92"
Marvel F2150TS2 Vertical Band Saw (2003) Description Capacity at 90 degrees-20" x 25" Capacity at 45 degrees-20" x 17" Capacity at 60 degrees-20...
DMG Mori CTV 160 2nd Vertical Machining Center (2015) Description Turning Diameter (Max): 6.3 Inches Turning Height (Max): 6.3 Inches, X-Axis T...
Lantech Shrink Wrap Machine Q-300 (2007) Description Base Turntable Diameter: 99" Height: 10'
CRS Staff 89 Rebar Bender (2005) Description Side Lengths - from 2" to 55" Bending Range, right and left - 5° to 180° Side Length Tolerance - ...
Baileigh RDB-500 Hydraulic Rotary Tube Bender 2023 Description Technical Specifications: Maximum Center Line Radius: 20" Minimum Center Lin...
ASC CAS4-36-12 Roll Former
ASC CAS4-36-12 Roll Former Description # of Stands: 12 Diameter of Shafts: 3" Roll Space (max width between part) 36" Horizontal distance betwee...
Tru Tech RollFormer
Tru Tech RollFormer Description# of stands: 10Diameter of Rolls: 1.5"Roll Space: 15"Horizontal Distance: 12" Equipped With NO TOOLING included
Loading...-
21 item(s)/page