Refine your search
Primary Category
Category
Brand
Item Type
- Tool Holder (23)
- Indicator (10)
- Collet (9)
- Machine Vise (9)
- Tooling (8)
- Milling Vise (7)
- CNC Machine (4)
- Gauge (4)
- Spindle (4)
- Caliper (3)
- Chuck (3)
- Cutter (3)
- Micrometer (3)
- Rotary Table (3)
- 3 Axis (2)
- CNC Lathe (2)
- Clamp (2)
- Collet Holder (2)
- Drill (2)
- Edge Finder (2)
- Finishing Machine (2)
- Indicator Set (2)
- Lathe (2)
- Lathe Chuck (2)
- Micrometer Set (2)
- Mill (2)
- Milling Machine (2)
- Organizer (2)
- Taper (2)
- Tool Changer (2)
- Vertical Mill (2)
- Vertical Milling Machine (2)
- Vibratory Finisher (2)
- Tumbler (2)
- 1 2 3 Blocks (1)
- Arbor Press (1)
- Bolts (1)
- Bore (1)
- Carbide End Mills (1)
- Carbide Insert (1)
- Collet Closer (1)
- Counter Sink (1)
- Cross Slide (1)
- Dial Caliper (1)
- Electric Forklift (1)
- Floor Matting (1)
- Fly Cutter (1)
- Forklift (1)
- Gage Block (1)
- Height Gage (1)
- Huot (1)
- Indexer (1)
- Inspection Equipment (1)
- Knurler (1)
- Lathe Accessories (1)
- Live Center (1)
- Oil Water Separator (1)
- Parallel Set (1)
- Parts Washer (1)
- Press (1)
- Quick turn (1)
- Reamer (1)
- Refractometer (1)
- Riser (1)
- Shrinker (1)
- Slotted Table (1)
- Square (1)
- Straight Edge (1)
- Tap (1)
- Taper Tool (1)
- Tool Sleeve (1)
- Vernier (1)
- Waste Recepticle (1)
State/Province
Town/City
- List
- Grid
-
94 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
Simple Green 56570 Parts Washer29'' X 33'' X 37'', Load Capacity 100, Grounded 15 Amp, 120 Volt, 60 Hz, Power Supply
(3) Global Rolling Garbage TotesWith Lids68'' X 33'' X 48'' Tall, On Wheels
Nissan 2500 Model MA01L13S Electric Forklift5,000 LBS Capacity 24 Volt, 3 StageSolid Tires5365 HoursBattery Weight Max 1709 LBS Min 1554 LBS Max L...
2019 Haas TM 2P CNC Vertical Mill10 1/2'' X 57.8'' Table Size, T Slot Table10 Pocket Carousel Tool Changer Capacity6,000 RPM Spindle Capacity3 Axi...
2019 Haas DM-2 CNC Vertical Mill15'' X 34'' Table Size, T Slot Table18+1 Carousel Tool Changer Capacity10,000 RPM Spindle Capacity3 AxisX-Axis Tra...
2019 Haas HRTA5 CNC 4th Axis Rotary TableA1-5 Spindle NosePlug & Play,A5 Chuck Bolts Directly to Spindle NoseMax Torque 150 ft-lb, Max Speed 130 D...
2019 Haas HA5C-T Single Spindle 5C Indexer5C Collet Nose, Single SpindleMax Torque 60 ft-lbMax Speed 410 Degrees / Sec, Platter : Max Weight on Pl...
2019 Haas TL-1 CNC Lathe
2019 Haas TL-1 CNC LatheA2-5 Nose Chuck Size2.3'' Bar Capacity1.8k RPM, 10 HP MotorSwing Ober Front Apron 20''Swing Over Cross Slide 11''No Chuck,...
1999 Mazak Quick Turn 200 CNC LatheSwing 20'', Machining Length 21''Chuck Size 8''Bar Capacity 2''Spindle 5,000 RPMTurning Diameter 10''12 Station...
Dorian Tool NVIT8-75 Manual Indexing Lathe Tool Holder8 Station Tool Holder
2007 Kennametal ISG 2200 Thermo Grip Heat Shrink Machine20 MM Diameter Max Tool Capacity40 Taper Tool SleevesWeight 55Lbs,400 Volts,50/60 Hz, 8 Kw...
(5) BT 40 Shrink Fit Tool HoldersIn (1) Tote
(5) BT 40 Shrink Fit Tool HoldersIn (1) Tote
(5) BT 40 Shrink Fit Tool HoldersIn (1) Tote
(6) BT 40 Shrink Fit Tool HoldersIn (1) Tote
(5) BT 40 Shrink Fit Tool Holders In (1) Tote
(4) BT 40 Shrink Fit Tool HoldersIn (1) Tote
(5) Lyndex BT 40 Collet Style Tool HoldersIn (1) Tote
(5) Lyndex BT 40 Tool HoldersIn (1) Tote
(5) Lyndex BT 40 Tool HoldersIn (1) Tote
(5) Lyndex BT 40 Tool HoldersIn (1) Tote
(4) Lyndex BT 40 Tool HoldersIn (1) Tote
(5) Lyndex BT 40 Tool HoldersIn (1) Tote
(6) Lyndex BT 40 Tool HoldersIn (1) Tote
(5) Lyndex BT 40 Tool HoldersIn (1) Tote
(5) Lyndex BT 40 Tool Holders In (1) Tote
(5) Lyndex BT 40 Tool Holders In (1) Tote
(5) Lyndex BT 40 Tool HoldersIn (1) Tote
(6) Lyndex BT 40 Tool HoldersIn (1) Tote
Assorted Chucks, Bore Tooling, Live Centers and Sleeves In (1) Tote
(8) Kennametal Double Angle DA180 Collet ChucksStraight Shanks, In (1) Tote
Haimer Universal 3D Sensor Edge Finder
(3) Enco 3/4'' Shank Fly Cutter Set
Hardinge 5C Pneumatic Collet Block
(35) Brand New 5C Collet Set
(35) Brand New 5C Collet Set In (1) Box
(26) 5C Collets and (12) Plastic 5C Collets
(142) Assorted Size ER Collets and (36) Tap Collets
(23) Hardinge 22J Assorted Sized Collets
(14) Global 86-12C Assorted Sized Tool Holder Bushings
(11) Hardinge 5C Step Collets With (1) Royal 5C Accu-Length Expanding Collet
(3) Lathe Chuck Adapter Plate Sizes 6'', 8'', 10''
Dunham DACC 27 Air Collet Closer 3/4'' Stroke3600 RPM MaxMax Stroke .750''Pull Force 2700 LBS @ 100 PSIPush Force 3100 LBS @ 100 PSI8.45'' Diameter
Yuasa 550-210 10'' Tilting Rotary Table 10'' Table Diameter3MT Center Taper(6) 11.94mm T Slot Width and a 90:1 Gear Ratio
Kurt 6'' HDL CarvLock Double Station Vise With Handle
Kurt 6'' HDL CarvLock Double Station Vise With Handle
Kurt 6'' AngLock Milling Machine Vise With Handle
Kurt 6'' AngLock Milling Machine Vise With Handle
Kurt 4'' Crossover Milling Machine Vise With Handle
Kurt 4'' Crossover Milling Machine Vise With Handle
Kurt 4'' Crossover Milling Machine Vise With Handle
Kurt 4'' Crossover Milling Machine Vise With Handle
(9) Riser Blocks
(9) Riser Blocks (3) 16'' X 4'' X 2 3/4'', (3) 7'' X 4'' X 2 3/4'', (3) 24'' X 4'' X 2 3/4''
Loading...-
94 item(s)/page