Refine your search
Primary Category
Category
Brand
- Giddings & Lewis (7)
- Giddings (5)
- Lewis (5)
- Cincinnati (3)
- Kuraki (3)
- Newall (3)
- Wotan (3)
- Baileigh (2)
- Baldor (2)
- DoALL (2)
- Econoline (2)
- KALAMAZOO (2)
- Wilton (2)
- Allen (1)
- American (1)
- American Hole Wizard (1)
- Bickford (1)
- Blanchard (1)
- Bradley (1)
- Bullard (1)
- Caldwell (1)
- Dake (1)
- Drum (1)
- Eberhardt (1)
- Enco (1)
- Fanuc (1)
- Gardner Denver (1)
- Gould (1)
- Gould & Eberhardt (1)
- Grieve (1)
- Instapak (1)
- Jet (1)
- Lagun (1)
- Landis (1)
- Lincoln (1)
- Mazak (1)
- Monarch (1)
- Quincy (1)
- Rapid (1)
- Siemens (1)
- South Bend (1)
- Springfield (1)
- Tornado (1)
- Victor (1)
Item Type
- Grinder (11)
- Chuck (8)
- Spindle (8)
- Angle Plate (7)
- Angle Plates (7)
- Boring Bar (7)
- Lathe (7)
- Press (7)
- Engine Lathe (5)
- Vise (5)
- Taper (4)
- Blast Cabinet (3)
- Boring Mill (3)
- Drill (3)
- Feed (3)
- Horizontal Boring Mill (3)
- Mill (3)
- Bandsaw (2)
- Boring Machine (2)
- Cross Slide (2)
- Cylindrical Grinder (2)
- Double End Grinder (2)
- Inspection Table (2)
- Milling Machine (2)
- Radial Arm Drill (2)
- Shaper (2)
- Shop Press (2)
- Straightening Press (2)
- Vertical Bandsaw (2)
- 3 Axis (1)
- Air Compressor (1)
- Air Storage Tank (1)
- Bead blasting (1)
- Bench Grinder (1)
- Blasting Cabinet (1)
- CNC Lathe (1)
- Cabinet (1)
- Clamp (1)
- Compressor (1)
- Cutter (1)
- Dip tank (1)
- Dividing Head (1)
- Drill Grinder (1)
- Drill Press (1)
- Dryer (1)
- Evaporator (1)
- Furnace (1)
- Gauge (1)
- Grinding Machine (1)
- Heater (1)
- Lifting Beam (1)
- Light (1)
- Pedestal Grinder (1)
- Plate (1)
- Power Feed (1)
- Pump (1)
- Rotary Table (1)
- Screen (1)
- Shelves (1)
- Slotted Table (1)
- Spindle Lathe (1)
- Storage Tank (1)
- T Slotted (1)
- Table (1)
- Tank (1)
- Turret Lathe (1)
- Washer (1)
State/Province
Town/City
- List
- Grid
- Lots per page
- 60
- 120
- 240
10" X 24" Landis O.D. Cylindrical Grinder, S/N 332-10
Quincy O.G.D-50 Air Compressor
Quincy O.G.D-50 Air Compressor, new 2019, 37 kW (50 HP), 132.0 psi, rotary screw package, 460V, S/N AP1588008 Note: Touch screen does not turn on.
Granite Inspection Table
Granite Inspection Table, 70" L x 48" W x H 42", 4" granite table top thickness
Collins MicroFlat Granite Inspection Table, 60" L x 30" W x 28 1/2" H, 4" granite table top thickness, 6" table leg thickness, S/N 67074
200 Ton Rodgers Model IF200D-4810 Horizontal Wheel Press, 48" between housings, 10' max. length, 13" ram travel, separate hydraulic tank, forward ...
Instapak with Sealed Air Instapak 901 Control
Thompson Reciprocating Table Surface Grinder, 24” X 8” magnetic table, 12" wheel dia, Neutrol controls, coolant, S/N 3574139
Baileigh 100 Ton H-Frame Press
Baileigh 100 Ton H-Frame Press, 100T M/H-M/C-2 D=1500, motor power 2.2 kW/220V/ 60Hz, weight 1145 kg, manufactured in 2015, S/N 10061N15006
Monarch 205 NC CNC Lathe
Monarch 205 NC CNC Lathe, 40" swing over bed, 26" over cross slide, 96" centers, 32" 4-jaw HD chuck with 5-1/2" thru-hole, 6 position hydraulic tu...
South Bend Engine Lathe
South Bend Engine Lathe, 8" 3-jaw chuck, bench top lathe on pedestal, taper attach., 3 hp spindle motor, 208V/3P, S/N 1166
Victor Model S2060B Engine Lathe
Victor Model S2060B Engine Lathe, 20" swing over bed, 60" centers, 3-1/2" spindle bore, 1500 rpm, Aloris tool post, inch/metric threading, Newall ...
DoALL Model 2013-V Vertical Bandsaw, new 1996, blade welder, 230V/3P/60Hz/5.7A, S/N 500-982096
4' 13" Giddings & Lewis Bickford Chipmaster Radial Arm Drill, 24" x 24" x 24" high T-slotted table, rapid traverse, inc. crate of misc tooling, S/...
Baldor 10" Double End Grinder, Table Mounted, 2 hp motor, 208/220V/3P, S/N 572
Allsource Model 41800 Blast Cabinet, new 2016, 110 psi max., int. dim: 47" L 120V/60Hz/1210 W, S/N NA
Grieve Model HB-1050 Box Furnace (with Tin Plate), new 2016, 1050 deg. F max. temp., 30 kW heat input, 460V/3P/60Hz/41A, S/N 117379A0516
Wastewater Evaporator
Wastewater Evaporator, gas fired, Siemens touch screen control, S/N NA
Mart Model Tornado 60 Power Washer, new 1997, 60" rotary table, 48" work height, 40 hp main motor, 15 hp auxilliary motor, 350 gal. reservoir, nat...
Hydro Test Bunker
Hydro Test Bunker, 10' x 10' x 9' inside dim., wood lined, steel fabricated, test bunker, compressed air, water line, alert control tech controls ...
Gardner-Denver Air Compressor, Model EBMOLC, 125 psi max. pressure, 75 hp motor, 460V/3P/60Hz, S/N U23768, S/N 1000002948806, inc. Gardner-Denver ...
500 Ton Dake Horizontal Press
500 Ton Dake Horizontal Hydraulic Wheel Press, 65" between housings, 12' between cylinders and push bar, (2) ram extensions, Rexroth hydraulic val...
25 Ton Dayton Model 3Z916A H-Frame Hydraulic Shop Press, new 1997, S/N NA
Sterling Drill Grinder
Sterling Drill Grinder, pedestal mount, mfd. by McDonough Mfg. Co., S/N NA
JPW Industrial Oven
JPW Industrial Cabinet Oven, Model ST333, 650 deg. F max., double door, 2 int. shelves, S/N NA
Econoline Shot Blast Cabinet
Econoline Shot Blast Cabinet, 43” X 23” X 23”
Econoline Model 42-24 Shot Blast Cabinet, 42” X 23” X 24”, S/N 90-3
10" x 96" Cincinnati Plain Cylindrical Grinder, with SBS Balance System Model SB-5500, Rebuilt by GCH in 2007, 30" Wheel, approx. 30 HP, 6 deg. sw...
36" Blanchard Model 20-36 Rotary Surface Grinder, rebuilt i/out gearbox, coolant pump, pressure on table and saddle, segmented wheel, variable Neu...
Gould & Eberhardt 28 Inch Industrial Shaper, S/N NA
4' 13" American Hole Wizard Radial Arm Drill, 4' arm, 13" col. dia., 32 spindle speeds, 20 - 1600 rpm, col. clamp, 2-sided box table, 14 feeds, 0....
Lagun Republic Model FTV-2 Vertical Milling Machine, 3 hp motor, shaper attach., power feed in X, S/N NA
4" Kuraki KBT-1003W Table Type Horizontal Boring Mill, new 1978, 4" spindle, 50 taper, 41" x 47" table, 78" across trvl, 50" vertical trvl, 63" in...
Barrett 6 x 6' Horizontal Cylinder Boring Machine, 52" W x 68" L bed, (2) 36" cap. steady rests, 60" stroke, S/N 1338
5" Giddings & Lewis Model 350-T Table Type Horizontal Boring Mill, 5" spindle, 60" x 98" table, 96" cross trvl, 72" vert. trvl, 60" in/out trvl, 0...
3" Giddings & Lewis Model 330T Table Type Horizontal Boring Mill, 3" spindle, 1300 rpm spindle speed, 36" x 74" table, 72" cross trvl, 36" vert. t...
Giddings & Lewis 330T Facing Head with Ring Gear and Declutching Unit
5" Wotan Table Type Horizontal Boring Machine, 5" dia. spindle, 72" X 79" power rotary table, 14-1000 rpm spindle speeds, 120" cross trvl, 84" ver...
28” Wotan Facing Head for Model B130
28” Wotan Facing Head for Model B130
DoALL Model 26-3 Vertical Bandsaw, 26" throat, 12.5" max. work ht., 216" max. band length, power table feed, power table tilt, blade tensioning, b...
Enco Model 100-1588 Vertical Milling Machine, new 1996, 10" x 54" table, 60 - 500 rpm (low), 500 - 4250 rpm (high), Enco 2-axis DRO, power table f...
Cincinnati No. 2 Horizontal Milling Machine, 12" x 52" table, #50 taper, 1500 rpm, vertical milling attach., 2 milling arbors with spacer, 1 arbor...
30" x 120" Kuraki Hollow Spindle Lathe Model KH6-30, new 1977, 20" 4-jaw front and 15" rear chucks, 6" hole, chuck guard, Aloris tool post, tails...
34.5" X 72" Springfield Model 25-72 Engine Lathe, new 1949, 34.5" max. swing, 72" centers, 12 - 487 rpm, 28" 4-jaw chuck, chuck guard, Aloris tool...
54" Bullard Cutmaster Vertical Turret Lathe, recent rebuilt by O'Connell, 54" table dia. (4-jaw chuck) with top jaws, 62" swing, 2.1 - 160 rpm tab...
18" x 120" Mazak Engine Lathe
18" x 120" Mazak Engine Lathe, 18" swing, 120" centers, 12 spindle speeds, 2 - 1500 rpm, 16" 4-jaw chuck, tool post, tailstock, chip pans, chuck g...
55 Ton Traveling Gantry Hydraulic Straightening Press, S/N NA
Sioux-Tool Valve Face Grinding Machine, 4” and 6” wheels, 230V/60Hz, 8.5 Amps, Cat No. 958, S/N 556
Baldor Double End 10” Pedestal Grinder with Led Screen Lights , 3 hp, 203-220/440V/3Ph, 7.3/3.6 Amps, Cat No. 1216W, S/N 978
8” Double End Grinder with Led Screen Lights, Brand N/A, Model 23-100, 1725 rpm, 115/230V/60Hz, S/N 63923BUG1
Lincoln 6” Double Bench Grinder on Pedestal, Model PP80BG10, new 1997, 1-1/2 hp, 3450 rpm, 110/220V/1Ph/60Hz, 9 amps, S/N 7070229
Hammond Kalamazoo 6” Tool Grinder, Model CB-77W, 440V/3Ph, 1/2 hp, 1725 rpm, with Led Light Screen, S/N 7179
Hammond Kalamazoo 6” Tool Grinder, Model CB-77B, 1/2 hp, 3450 rpm, 1/2 HP, 440V/3Ph, S/N 8191
Jet Model Jet-420F3P Drill Press
Jet Model Jet-420F3P Drill Press, foot pedal activation, S/N 37617
75 Ton Baileigh Industrial H-Frame Shop Press, Model 75T Air Press, new 2018, ex-factory number PO12036-75T- 10/108
10 Ton Hydraulic Straightening Press, 150” L x 19” W x 33-1/2” H, foot pedal activated, S/N NA
5” Wilton Vise on Pedestal, 6” solid base
6” Wilton Vise on Pedestal, with No. 25 Rigid Pipe Vise, 1/8 to 4”, 2” thick base
Cincinnati Dividing Head with a 8” 3-Jaw Chuck
Loading...- Lots per page
- 60
- 120
- 240