Wilton bullet vise, 4 inch, no. 101028 ...[more]

Buffalo 21 piece 1 inch drive socket set, 1-1/2 - 3-1/8 inch sockets ...[more]

Thermac precision grinder, type J45, serial 8676, full load speed 10,000rpm, 1/2 inch arbor, 4.5amp, 115v ...[more]

Bridgeport15 inch rotary table, serial no. 17845 ...[more]

Mastercraft tools 5-1/2 × 12 inch cross slide table, model no.800 ...[more]

Economy Engoneering die lift cart, model MV54, serial 23324, 750lb capacity, 54 inch lift, 18 inch load center, 24 x 24 inch deck ...[more]

Workhorse products mower plowing attachment, 42 x 16 inch blade, 65 x 14-1/2 (widest end) inches, tilt lever ...[more]

9 inch diameter x 40 inch auger PTO driven with 3-point hitch attachment ...[more]

Cub Cadet 19 inch gas powered lawn mower, model 12AE18M3056, serial 1B048K30982, 173cc OHV engine, electric and pull starting, self propelled, 10w...

{ Choice of lots: 10, 11 } Magna-sine 6 x 10 permanent magnet chuck, model A-10, attached to sine plate ...[more]

{ Choice of lots: 10, 11 } 6 x 10 permanent magnet chuck attached to sine plate ...[more]

Burnerd "EE" collet closure, camlock mounting, includes collets 1 inch up to 2-3/8 inch ...[more]

R8 spin index fixture ...[more]

Assorted lathe tooling to include, no 3 concave radius tools, trav-a-dial, straight shNk live center, knurling tools ...[more]

Enco 6 inch precision machine vise with handle, model 42016 includes swivel base ...[more]

Enco 6 inch precision machine vise with handle, model 42016 includes swivel base ...[more]

Sandvik tool holders and assorted Carbide inserts as shown ...[more]

Assorted drill chucks 0 to 1/2 inch capacity, some Jacob brand ...[more]

Assorted measuring tools to include 72 inch straight edge ruler, squares, levels, tape measures ...[more]

{ Choice of lots: 20, 21, 22, 23, 24 } (8) Kant-twist clamps, 6 inch ...[more]

{ Choice of lots: 20, 21, 22, 23, 24 } (9) Kant-twist clamps, 6 inch ...[more]

{ Choice of lots: 20, 21, 22, 23, 24 } (9) Kant-twist clamps, 4 inch ...[more]

{ Choice of lots: 20, 21, 22, 23, 24 } (8) Kant-twist clamps, 4 inch ...[more]

{ Choice of lots: 20, 21, 22, 23, 24 } (9) Kant-twist clamps, 4 inch ...[more]

(11) assorted c-clamps as shown ...[more]

Assorted pipe cutters up to 3 inch ...[more]

(4) pipe wrenches, 8 to 36 inch ...[more]

Assorted dead blow hammers ...[more]

{ Choice of lots: 29, 30 } Assorted metal stamping sets, letter and number ...[more]

{ Choice of lots: 29, 30 } Assorted metal stamping sets, letter and number ...[more]

Strongway pallet jack, 4400lb capacity ...[more]

Assorted bearings as shown, Timken, Hoover, NTN, Torrington brands, see pictures for part numbers ...[more]

Morse taper no. 5 socket and 5 to 4 adapters ...[more]

Assorted jacks ...[more]

Gas powered suction pump, Briggs and Stratton 2.5hp engine ...[more]

(2) grinding attachments with 3-phase motors and depth adjustment pneumatic actuators ...[more]

Lot off assorted Timken bearings and assorted pillow blocks (appear new) ...[more]

{ Choice of lots: 38 } (3) pallets of wood, 2-7/8 x 3-1/2 x 30 inch ...[more]

Pallet of 3 x 3-1/4 × 30 inch wood ...[more]

Stacks of pallets, 72 x 30 inches ...[more]

Contents or storage room to include: cabinets, shelves, saw blades, back supports, air hoses, bearing puller, power drills, drill bits, gas regula...

Misawa Seiki Rockwell hardness tester, serial no. 75260, B and C scales, includes hardness pins, plates and weights ...[more]

Mitutoyo calipers partial set, 2 - 3 inch up to 11 - 12 in, .0001 inch, standards and wood box ...[more]

Mitutoyo 30 inch vernier calipers, wood box ...[more]

{ Choice of lots: 45, 46 } Mitutoyo 18 inch vernier caliper in wood box ...[more]

{ Choice of lots: 45, 46 } Mitutoyo 18 inch Vernier Calipers, wood box ...[more]

{ Choice of lots: 47 } Mitutoyo cylinder gauge, model 511-106, 2 - 4 inch, .0005 ...[more]

Mitutoyo cylinder gauge, model 511-106, 2 - 4 inch, .0005 ...[more]

{ Choice of lots: 49, 50 } Teclock cylinder gauge, 4 - 25 inch, model CCI-60 ...[more]

{ Choice of lots: 49, 50 } Teclock cylinder gauge, 7 - 14 inch, model CCI-35 ...[more]

(4) assorted micrometers, 0-1, 2-3, 3-4 inches ...[more]

Bestool Kanon 12 inch height gage with counter, .001 inch, model ADH-12 ...[more]

Assorted indicators and magnetic stands ...[more]

Assorted inspection items to include, 3 - 4 inch micrometer, 6 inch calipers, mitutoyo radius gage, depth gage, engineering set ...[more]

Starrett 20 inch steel square, no.20, wood holder ...[more]

(3) assorted indicators, Enco .0005, Verdict .001 ...[more]

Offset indicator model CDI-60000-K, .0005 inch axis offset ...[more]

(5) steel squares, 4 to 10-1/2 inches ...[more]

Adjustable parallels, 3/8 - 2-1/4 inches ...[more]

(2) radius gage sets 1/16 up to 1 inch ...[more]