Lot

521

1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE

In Laser Clean Ltd & TurCon United Bldg Systems I...

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 780-922-6090 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
1/9
Bidding has ended
1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE - Image 1 of 9
1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE - Image 2 of 9
1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE - Image 3 of 9
1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE - Image 4 of 9
1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE - Image 5 of 9
1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE - Image 6 of 9
1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE - Image 7 of 9
1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE - Image 8 of 9
1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE - Image 9 of 9
1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE - Image 1 of 9
1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE - Image 2 of 9
1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE - Image 3 of 9
1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE - Image 4 of 9
1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE - Image 5 of 9
1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE - Image 6 of 9
1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE - Image 7 of 9
1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE - Image 8 of 9
1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE - Image 9 of 9
8,500 CAD
Edmonton, Alberta
5.00%
13.00%

FOOTHILLS EQUIPMENT LIQUIDATION CO LTD

1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE DRAG SLICKS, 116,564 MILES ON GAUGE, S/N 1GCEC14W9VZ184116 

INFORMATION ON PICK-UP SUPPLIED BY OWNER WHEN TRYING TO SELL IT 

NOT WARRANTED BY FOOTHILLS

97 Silverado reg cab short box step side. Only a few miles since it's been finished.
Chassis & Suspension;
The truck was disassembled, chassis stripped to bare metal and painted, re-assembled with all new parts.
Front- Belltech 2/3" pro coil drop springs and 2" drop spindles, new ball joints, monroe shocks, rotors, pads, calipers, wheel bearings. 88-94 style proportioning valve used with factory booster, new hard lines.
Rear- Fabricated axle flip & under bed c-notch, tubular cross members for rear sway bar and relocated shock set up, and tank. Again, new everything, monroe shocks, shackles, leaf spring bushings. Factory Gas tank was removed, and a 19-gallon fuel tank was rear-mounted, and sumped for a holley fuel pump, and 3/8 stainless lines ran front to back. New drums, shoes, wheel cyl's, parking brake cables.
Wheels & Tires
Wheel Vintiques Camaro / Corvette Rally's-15x7 fronts with BFG Radial T/A 235/70/15, 15x10 rears with, Mickey Thompson 28x11.5 et street drag radials
Drive Train
-1998 5.7 Mexican roller block (880 casting # ) same as zz4 block but 2 bolt main, powdered rods, coated hypertectic pistons, 6 qt oil pan/windage tray, hv oil pump, gm hd single roller timing chain (short block all parts out of gmpp performance catalog) Edelbrock E-tec 170 heads, Edelbrock (rollin thunder) roller cam 296 in./300 ex. duration 539 in./548 ex lift, 112 LSA, Edelbrock air gap intake, world performance 1.5 roller rockers, msd stree fire distributer, holley 750 dp, Holley fuel pressure regulator, Griffin aluminum rad / flexalite electric fan ran on a thermostat, Headman long tube headers, serpentine accessories (a/c delete), 2.5" dual exhuast with Flowmaster super 44's
Still pump gas friendly, drive anywhere, makes 435hp so it goes like hell, and turns a tame 2200RPM at 75mph
-NV3500 5-speed transmission, new pressure plate/clutch, gm flywheel, 5" aluminum driveshaft built at pat's driveline
-10 bolt rear end w/3.42 gears

Interior
-Grey full load (power windows, locks) leather buckets, floor console, overhead console, factory delco radio with cd player, alpine door speakers, MTX truck speakers behind seats, full sweep autometer ultra lite 2 electronic gauges (speedo with gps interface, tach, water temp, oil temp, oil pressue, volts, signals, and high beam lights...over $1600 worth of gauges and associated senders), rear slider window
Body
- Its still stock as i purchased it, but in nice shape. The truck is rust-free with the exception of the pass side door. The few small changes are, the grill has a black bowtie, clear upper markers, and signals. The factory folding mirrors were changed to 454ss style. The front bumper was switched to a smoothie style, with a new lower valance, and the rear bumper is removed in favor of a fiberglass roll pan (not pictured)

 

Auctioneer:

FOOTHILLS EQUIPMENT LIQUIDATION CO LTD

1997 CHEVROLET DRAG PICK UP TRUCK, REGISTRATION INDICATES REBUILT, MODIFIED ENGINE DRAG SLICKS, 116,564 MILES ON GAUGE, S/N 1GCEC14W9VZ184116 

INFORMATION ON PICK-UP SUPPLIED BY OWNER WHEN TRYING TO SELL IT 

NOT WARRANTED BY FOOTHILLS

97 Silverado reg cab short box step side. Only a few miles since it's been finished.
Chassis & Suspension;
The truck was disassembled, chassis stripped to bare metal and painted, re-assembled with all new parts.
Front- Belltech 2/3" pro coil drop springs and 2" drop spindles, new ball joints, monroe shocks, rotors, pads, calipers, wheel bearings. 88-94 style proportioning valve used with factory booster, new hard lines.
Rear- Fabricated axle flip & under bed c-notch, tubular cross members for rear sway bar and relocated shock set up, and tank. Again, new everything, monroe shocks, shackles, leaf spring bushings. Factory Gas tank was removed, and a 19-gallon fuel tank was rear-mounted, and sumped for a holley fuel pump, and 3/8 stainless lines ran front to back. New drums, shoes, wheel cyl's, parking brake cables.
Wheels & Tires
Wheel Vintiques Camaro / Corvette Rally's-15x7 fronts with BFG Radial T/A 235/70/15, 15x10 rears with, Mickey Thompson 28x11.5 et street drag radials
Drive Train
-1998 5.7 Mexican roller block (880 casting # ) same as zz4 block but 2 bolt main, powdered rods, coated hypertectic pistons, 6 qt oil pan/windage tray, hv oil pump, gm hd single roller timing chain (short block all parts out of gmpp performance catalog) Edelbrock E-tec 170 heads, Edelbrock (rollin thunder) roller cam 296 in./300 ex. duration 539 in./548 ex lift, 112 LSA, Edelbrock air gap intake, world performance 1.5 roller rockers, msd stree fire distributer, holley 750 dp, Holley fuel pressure regulator, Griffin aluminum rad / flexalite electric fan ran on a thermostat, Headman long tube headers, serpentine accessories (a/c delete), 2.5" dual exhuast with Flowmaster super 44's
Still pump gas friendly, drive anywhere, makes 435hp so it goes like hell, and turns a tame 2200RPM at 75mph
-NV3500 5-speed transmission, new pressure plate/clutch, gm flywheel, 5" aluminum driveshaft built at pat's driveline
-10 bolt rear end w/3.42 gears

Interior
-Grey full load (power windows, locks) leather buckets, floor console, overhead console, factory delco radio with cd player, alpine door speakers, MTX truck speakers behind seats, full sweep autometer ultra lite 2 electronic gauges (speedo with gps interface, tach, water temp, oil temp, oil pressue, volts, signals, and high beam lights...over $1600 worth of gauges and associated senders), rear slider window
Body
- Its still stock as i purchased it, but in nice shape. The truck is rust-free with the exception of the pass side door. The few small changes are, the grill has a black bowtie, clear upper markers, and signals. The factory folding mirrors were changed to 454ss style. The front bumper was switched to a smoothie style, with a new lower valance, and the rear bumper is removed in favor of a fiberglass roll pan (not pictured)

 

Laser Clean Ltd & TurCon United Bldg Systems Inc

Ends from
Venue Address
Multiple Locations
Edmonton & Grande Prairie
Alberta
T0B 4J0
Canada

We are making things easier for you, auction specific shipping information coming soon. For now, please visit the Important Information / Terms & Conditions tab [next tab to the right] for auction specific removal dates, preferred vendors and more.

For general shipping information from the auctioneer please see below:

For FOOTHILLS EQUIPMENT LIQUIDATION CO LTD delivery information please telephone 780-922-6090.

Important Information

Please note there are two locations for this sale  -  Bldg 4, 7220 51 Avenue Edmonton, Ab T6B 2P4 & 9823 97 Avenue, Grande Prairie T8V 8B9

 

=========================================

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here. 

Customer Support Hours:

  • Monday – Thursday, 8:00 AM EST – 10:00 PM EST
  • Friday, 8:00 AM EST – 6:30 PM EST 

Email: support@bidspotter.com

Office: (253) 858-6777      Toll Free: (866) 597-2437

Frequently Asked Questions

RIGGER/SHIPPER

Rusty's Equipment & General Hauling Ltd. - Doug Manuel, Office 780-456-5611, Cell 780-288-7770

Stan Canada - 780-965-6202

 

**IMPORTANT - PLEASE NOTE - ALL PIPE AND STEEL FROM DAY 2, SEPT 30. REMOVAL IS BY APPOINTMENT OR AS AGREED TO BY FOOTHILLS.

 

 

Terms and Conditions

 

 Terms and Conditions

TERMS & CONDITIONS FOR FOOTHILLS EQUIPMENT LIQUIDATION CO. LTD.

UNRESERVED TWO INDUSTRIAL BANKRUPTCIES -ONE DAY SIMUTANEOUS TIMED ONLINE AUCTION FOR LASER CLEAN LTD. EDMONTON & TURCON UNITED BUILDING SYSTEMS INC. GRAND PRAIRIE.  BIDDING STARTS ON FRIDAY, MARCH 26, 2021 & STARTS CLOSING AT 9 A.M. MST. ON THURSDAY, APRIL 8, 2021

TERMS & CONDITIONS FOR ON-LINE BIDDER:

CUTOFF FOR ONLINE BIDDER REGISTRATION IS WEDNESDAY APR 7, 3 P.M.

CDN. DOLLARS (CAD) SETTLEMENT MUST BE MADE BY 4 P.M. ON THE DAY FOLLOWING THE AUCTION.

Subject to additions and deletions prior to the sale and at the time of the auction. All bidders participating in the auction shall be bound by the following terms & conditions.

1. Auction to be conducted in English & in Canadian Dollars (CAD).

1(a) Payment or guaranteed settlement must be made immediately at the conclusion of the auction.

2. Foothills required guaranteed payment which must be provided by the purchaser by means of the following: 2a, 2b or certified funds given as a deposit in trust.

2(a) Bidders must provide a valid credit card number to register. A $1, OOO pre-authorized hold may be placed on this credit card prior to the sale and anytime up to sale time.  Bidders will be refunded within 3 – 5 days if no purchases are made.

2(b) A pre-authorized hold may be placed on the credit card provided for 25% of the amount of any purchases immediately on the drop of the hammer. This deposit is non-refundable unless certified funds are given. Payment in full is expected by 4 p.m. the day following the sale.

 2(c) Foothills may and will charge the credit card left at the point of registration for any and all auction purchases if another method of payment is not arranged within 24 hours prior to the auction ending

3. Foothills Equipment Liquidation Co. Ltd. "Foothills" reserves the right to accept or reject a Bidders registration, and those with incomplete information, invalid credit card, or insufficient funds to complete a hold, as described in paragraph 2. To avoid delays in the registration approval process, please check accuracy of all information provided. If your anticipated purchases are going to be over $10,000 a guarantee of payment must be provided at the time of registration.  Failure to comply allows Foothills to reject any bid.

4.  Foothills accept the following methods of payment: Visa, Mastercard to $3,000 with no credit card fees, 3% over $3,000.  Wire Transfer & Bank Drafts in Canadian Dollars (CAD)

5. Each successful online bidder will receive confirmation at the beginning of the next business day either by phone or by email. All purchases must be settled in full by 4 p.m. on the day following the sale. Foothills will make one attempt at phoning all winning bidders with the final invoice total and to confirm the method of payment. If we are unable to contact you, purchases will be charged to the credit card as provided. Otherwise, payment arrangements can be made by calling 780-922-6090 with your Bidder # as reference.

6. BUYERS MUST ARRANGE ALL SHIPPING AT THEIR OWN EXPENSE.  All articles purchased shall be removed by the Purchaser. Purchaser is responsible for all removal, dismantling, crating, shipping and related costs, as well as the arrangement of the shipping company. No exceptions will be made whatsoever. Articles left behind immediately after the auction and thereafter will be at the winning bidders own risk. Foothills will not be held responsible for any items damaged, stolen, missing, or left behind. Please make all necessary arrangements to have your items removed as soon as possible. Small items must be removed immediately.

7. Removal deadline for Edmonton Site, “Laser Clean Ltd. in bankruptcy” at Bldg 4, 7220 51  Ave, Edmonton is Friday, April 16th, NO EXCEPTIONS!! Pickup for this site for Saturday, April 10th is by appointment only.

Removal for Grand Prairie site “Turcon United Building Systems Inc.” at 9823 97 Street, Grand Prairie is Friday April 9 to Monday April 12, NO EXCEPTIONS!! **REMOVAL AT THIS SITE IS COMPLETLY THE RESPONSIBILITY OF THE PURCHASER, THERE IS NO FORKLIFT AT THIS SITE**

8. A 13% buyer's premium will apply on all purchases made by internet bidding.

9. A 5% GST applies to all purchases in Canada.  Any exempt buyers can apply to CRA for a refund

10. Terms and conditions are subject to amendments and modifications announced by the auctioneer at the time of the auction. Sale is subject to additions & deletions, and may include items from other consignors and/or situations.

11. All items are sold "AS IS, WHERE IS" with no warranties expressed or implied.

12. The Auction Company reserves the right to accept or reject bids, and to resolve any disputes or discrepancies at its discretion. The Auctioneers or Auction Companies decision shall be final.

13. All descriptions & photos provided by the catalog listing are for informational purposes only and in no way a representation or guaranteed implied or given.

14.  If for any reason the auction company’s ability to turnover clear title and unrestricted removal becomes an issue the auction company is liable only to refund the hammer price, buyer’s premium and taxes paid.

 

 

 

Wire transfer Information:

Currency: CAD

Beneficiary: Foothills Equipment Liquidation Co. Ltd.

Contact Linda: 780-922-6090 or cell 780-721-5245

Reference: LASER CLEAN LTD & TURCON CONSTRUCTION GROUP   - For payment on Bidder # and Name

See Full Terms And Conditions

Tags: Chevrolet, Monroe, MSD, Leaf Spring, Fuel Pump, Oil Pump, Fuel Tank, Shocks, Bumper, Tires, Oil, Engine, Wheel, Pistons, Lift