{ Group of lots: 60, 61 } SHELF W/CONTENTS TO INCLUDE MISC. STEEL, CASTERS, STEEL SHIM STOCK - LOAD FEE - $100

{ Group of lots: 60, 61 } LOT SHELF W/CONTENTS TO INCLUDE MISC. DRILL BITS - LOAD FEE - $75

{ Group of lots: 62, 63, 64 } LOT SHELF W/CONTENTS TO INCLUDE MISC. STEEL, BAR STOCK - LOAD FEE - $75

{ Group of lots: 62, 63, 64 } LOT SHELF W/CONTENTS TO INCLUDE S.S. & BRASS MATERIAL - LOAD FEE - $100 ...[more]

{ Group of lots: 62, 63, 64 } LOT SHELF W/CONTENTS TO INCLUDE S.S. & BRASS MATERIAL - LOAD FEE - $100 ...[more]

OMIT ...[more]

ROBOPAC M# ROBOT S6.1 PVS-USA, ROBOTIC STRETCH WRAPPER, S/N 30143257, 2016, DIGITAL CONTROLS (NOT CHARGED-REPORTED AS IN RUNNING CONDITION) - LOA...

DRESSER/ROOTS VACUUM BLOWER PUMP, M# CRS65, S/N 96-115943 (NOT HOOKED UP-REPORTED AS IN RUNNING CONDITION WHEN REMOVED FROM SERVICE) - LOAD FEE -...

UTE M# 4X8 SH-ST-A THERMAL FORMING MACHINE, S/N 0904-232, 4' X 8', 8' TABLE TRAVEL, 100 AMP, RIETFCHLET M# VC50 VACUUM PUMP, VERT. 200 GAL. VACUUM...

{ Group of lots: 69, 70 } QUINCY ROTARY SCREW AIR COMPRESSOR, M# QMALACA21D, S/N 72367, 29,245 HOURS (NOT HOOKED UP-REPORTED AS IN RUNNING CONDIT...

{ Group of lots: 69, 70 } HANKISON HHE-450 HEATLESS DESICCANT AIR DRYER, S/N 1000002823603 (NOT HOOKED UP-REPORTED AS IN RUNNING CONDITION WHEN R...

DEKKER, M# VMX0553KA1-00, S/N I19376, VACUUM PUMP, 2007, 31,333 HOURS, 550 CFM (NOT HOOKED UP-REPORTED AS IN RUNNING CONDITION WHEN REMOVED FROM S...

{ Group of lots: 72, 73, 74 } FALLS, M# D-BUR-R (121), EDGE DEBURR MACHINE, S/N 3939, 24 GA. - 1/4" CAP. - LOAD FEE - $30

{ Group of lots: 72, 73, 74 } FALLS, M# D-BUR-R (121), EDGE DEBURR MACHINE, S/N 3938, 24 GA. - 1/4" CAP. - LOAD FEE - $30

{ Group of lots: 72, 73, 74 } FALLS, M# N/A, EDGE DEBURR MACHINE, 24 GA. - 1/4" CAP. - LOAD FEE - $30

{ Group of lots: 75, 76 } NISSAN ELEC. FORKLIFT, M# CYGM02L253, S/N 003632, 3,000 LB. CAP., 3-SECTION LOW PROFILE MAST, SIDE SHIFT, 48" FORKS, HA...

{ Group of lots: 75, 76 } NISSAN FORKLIFT BATTERY (CONDITION UNKNOWN) - LOAD FEE - $25

2000 FORD F250 XL, EXT. CAB, VIN# 1FTNX20F2YEE07415, 311,924 MILES, GOOD RUBBER (NOT RUNNING-MOTOR PROBLEMS) - BUYER WILL NEED TO MAKE ARRANGEMENT...

2000 FORD F250 XL, EXT. CAB, VIN# 1FTNX20F6YEE07417, (RUNS-NO BRAKES) - BUYER WILL NEED TO MAKE ARRANGEMENTS TO TOW VEHICLE FROM PROPERTY - NO REP...

FOWLER MICROMETER, 12" - 16", MITUTOYO DIAL HEIGHT GAUGE - LOAD FEE - $20

DOALL GRANITE SURFACE PLATE, S/N 1578-G, 36" X 48", METAL STAND - LOAD FEE - $100

WILSON/ROCKWELL HARDNESS TESTER - LOAD FEE - $25

J & L 14" OPTICAL COMPARATOR, M# 116, 1979 - LOAD FEE - $30 ...[more]

LOT (3) ROLLAROUND WOOD SHOP TABLES - LOAD FEE - $125

LOT MISC. ALUM. STOCK - LOAD FEE - $75 ...[more]

LOT RACK W/CONTENTS TO INCLUDE MISC. TUBING, ROUND BARS, ALUM. - LOAD FEE - $750

LOT RACK W/CONTENTS TO INCLUDE MISC. TUBING, ROUND BARS, ALUM. - LOAD FEE - $500

LOT (2) ROLLAROUND RACKS W/CONTENTS TO INCLUDE MISC. ROUND BAR, SQUARE TUBING, SOLID ROUND BAR - LOAD FEE - $200

WILTON HORIZ. BANDSAW, M# 3410, S/N 061213828, 7" X 12" CAP. - LOAD FEE - $50

POWERMATIC, VERT. BANDSAW, M# 87, S/N 587444, 20" THROAT, 10" CAP. - LOAD FEE - $75

60" H-FRAME PRESS, 5 HP, HPU, APPROX. 20 TON CAP. - LOAD FEE - $180

DAVIS KEYSEATER, M# 4, W/ACCESS. - LOAD FEE - $50

LOT PIPE STANDS & BENCH CENTER - LOAD FEE - $50 ...[more]

SHELF CONTENTS TO INCLUDE WOOD SAMPLES & PLASTIC STOCK - LOAD FEE - $100 ...[more]

CINCINNATI MILICRON, M# SABER 1000, CNC VERT. MACHINING CENTER, S/N 7039-A01-96-0693, ACRAMATIC 2100 CONTROLS, REMOTE JOG, 21-TOOL ATC, CAT 40 SPI...

OMIT

BROWN & SHARP, M# 2, PLAIN HORIZ. MILL, 10" X 45" - LOAD FEE - $100 ...[more]

MILWAUKEE, M# H-2UNIV, HORIZ. MILL, S/N 15-3382, 10" X 50" - LOAD FEE - $100

{ Group of lots: 95A, 96, 97 } LOT SHELF W/CONTENTS TO INCLUDE MISC. TOOL CUTTERS, MISC. CAT TOOLING - LOAD FEE - $50

{ Group of lots: 95A, 96, 97 } LOT SHELF W/CONTENTS TO INCLUDE MISC. TOOLING - LOAD FEE - $100

{ Group of lots: 95A, 96, 97 } LOT SHELF W/CONTENTS TO INCLUDE 6" SHOP VISE, BRIDGEPORT 6" SHOP VISE, MISC. TOOLING - LOAD FEE - $50

SHARP 3 HP VERT. MILL, S/N 84060064, NEWALL 2-AXIS DRO, V.S., 10" X 50" TABLE - LOAD FEE - $120

WELLS-INDEX, VERT. MILL, M# 747, S/N 19954, NEWALL 2-AXIS DRO, V.S., 9" X 46.5" TABLE - LOAD FEE - $100

{ Group of lots: 100, 101 } LOT SHELF W/CONTENTS TO INCLUDE MISC. DRILLS, REAMERS, CUTTERS, ETC. - LOAD FEE - $100

{ Group of lots: 100, 101 } LOT SHELF W/CONTENTS TO INCLUDE 72-BIN NUT & BOLT RACK - LOAD FEE - $100 ...[more]

{ Group of lots: 102, 103, 104 } LOT SHELF W/CONTENTS TO INCLUDE MISC. NUTS, BOLTS, DRILLS, TAPS - LOAD FEE - $100

{ Group of lots: 102, 103, 104 } LOT SHELF W/CONTENTS TO INCLUDE MISC. NUTS, BOLTS, DRILLS, TAPS - LOAD FEE - $100

{ Group of lots: 102, 103, 104 } LOT SHELF W/CONTENTS TO INCLUDE MISC. NUTS, BOLTS, DRILLS, TAPS - LOAD FEE - $100

LOT MISC. CUTTERS & SAW BLADES W/ROLLAROUND RACK - LOAD FEE - $150 ...[more]

DOALL SURFACE GRINDER, M# G-1, SURFACE GRINDER, 51952, 6" X 18" MAGNETIC CHUCK, COOLANT - LOAD FEE - $75

TOOL & CUTTER GRINDER, M# N/A, 1 HP MOTOR (NOT IN SERVICE) - LOAD FEE - $45 ...[more]

KO LEE TOOL & CUTTER GRINDER, M# B300, S/N 8795-465 - LOAD FEE - $25 ...[more]

BALDOR 2" VERT. SANDER - LOAD FEE - $25

LOT MISC. SCRAP - LOAD FEE - $50

3' X 7' STAINLESS STEEL-TOP TABLE - LOAD FEE - $30

ARTER ROTARY SURFACE GRINDER, M# B-30, S/N 887, 31" MAG CHUCK, 2-1/4" X 20" WHEEL - LOAD FEE - $500

LANDIS OD CYLINDRICAL GRINDER, M# 14X38, S/N 24974, 14" SWING X 48" CENTERS - LOAD FEE - $500

COOKS M# CATCLAW AUTOMATIC BLADE SHARPENER, V.S., W/CATCLAW DUAL TOOTH SETTER, MTD. ON ROLLAROUND WORK TABLE - LOAD FEE - $50 ...[more]

TAYLOR-WINFIELD BLADE WELDER, M# 8-2.5A FLASHBUTT, S/N 77460, ENTRON CONTROL (NOT CURRENTLY HOOKED UP-CONDTION NOT KNOW) - LOAD FEE - $50

MAY DRILL GRINDER, S/N 3357, 3/8" - 3" CAP. - LOAD FEE - $50