READ AND UNDERSTAND THESE TERMS AND CONDITIONS. Information Lot, This is a surplus equipment auction for VA Hardwood Flooring and other of its mem...

Winston Machinery Incline 5 Strand Transfer Deck Check out lots 10-20, 9' x 13' x 50" high, electric drive, needs sprocket and chain on drive Chec...

Winston Machinery stick removal Belt Conveyor, 21" x 12', 18" belt, no drive

Winston Machinery 5 Strand Incline Transfer Deck, 9' x 13' x 50" high, electric drive

6 Strand Lumber Grading Chain, 11' x 15'6" x 32" high, electric drive, C55B rooftop chain

Dead Rolls, 50" x 26' overall, 4" x 48" rolls, 1 1/4" shaft, 32" roll spacing

Winston 6 Strand Unscrambler Machinery, 8' x 16' x 5' high, electric drive   NOTE: This unscrambler will also work nicely with Lot 340A the T & S ...

Winston Machinery 4 Strand Transfer Deck, 12'8" x 26' x 56" high, electric drive

6 Strand Transfer Deck, 13' x 13' x 48" high, electric drive, popup stops

Winston Machinery Belt Conveyor, 3' x 17'6" x 44" high, 30" belt, electric drive Infeed conveyor to Multi Gang Rip

Winston Machinery Roll Case, 3' x 31' x 42" high, electric drive, 8 1/2" x 24" rolls, 2" shaft, 24" roll spacing

Hydraulic Unit, Tag on motor is missing

{ Choice of lots: 20a } * mcc and VFD for Winston system, Weg cfw 8vector inverter plus

* CH nema 0 and weg CFW08 plus controls, Last lot of entirety  ...[more]

*Winston Machine Complete Breakdown Line Infeed to Ripping Line, Breakdown hoist with stick removal  landing table and transfer decks stick remova...

{ Choice of lots: 21, 22 } Industrial Upcut Saw, Serial # 501L-9-343885, 14" blade, electric drive Includes Foot Control

{ Choice of lots: 21, 22 } Industrial Upcut Saw, Serial # 501L-9-343585, 14" blade, electric drive

Kiln Carts, 6 1/2" x 72", for 1 3/4" rails, 70 total

Hasko SR-24 Gang Saw, Serial # 0133512, 75 HP electric motor, hydraulic powered feed rolls, includes hydraulic pack on top

*New Arbor for Hasko Rip Saw, .

Belt Conveyor with 4 Cutoff Saws, 5' x 70' overall, 16" belt, saws have 12" blades, electric drive

Hasko Flooring Machine side matcher Feed Table,  13' infeed,    6 grooved spiral feed rolls with top roll indelible feed 10" bed plates   ...[mor...

Hasko Matchmaster FSM 4-Sided side matcher, HASKO MATCH MASTER  Side matcher flooring machine Serial # 9715911, 6" capacity, 40 HP electric motors...

*Matcher and Feed Table Control Panel, For Side Matcher and feed table

Yates American Profile Grinder, Serial # B-29393

Heads for Hasko Side Matcher, Heads for the  side matchers  and end matchers.  head jointing units extra knives  There are thousands of dollars of...

25 HP Hydraulic Pack, Was used on lot # 26 and 27

75 HP Hydraulic Power Pack, For Match Master Side Matcher Feed

Ingersoll-Rand Air Compressor, Model 523, serial # 30T280121, 7 1/2 HP electric motor, approx. 200 gallon vertical tank, located on the other side...

{ Choice of lots: 31, 34, 35, 36, 37 } Waste Conveyor, 10" x 22', 6" belt, 4" sides, electric drive

{ Choice of lots: 32 } Waste Conveyor, 20" x 55', 4" sides, 16" belt, electric drive

{ Choice of lots: 33 } Waste Conveyor, 13" x 80', 3" sides, 12" belt, electric drive

{ Choice of lots: 31, 34, 35, 36, 37 } Waste Conveyor, 17" x 24', 5" sides, 13" belt, electric drive

{ Choice of lots: 31, 34, 35, 36, 37 } Waste Conveyor, 12" x 15' on incline, additional 10'

{ Choice of lots: 31, 34, 35, 36, 37 } Waste Conveyor, 14" x 12', 5" sides, 12" belt, electric drive

{ Choice of lots: 31, 34, 35, 36, 37 } Waste Conveyor, 17 1/2" x 28' x 35" high

Cornell Automated Cutoff Saw, Model SHL, serial # 634-7-85, 24" blade, 15 HP electric motor mounted motor controls, and pedestal control

Cornell Waste Conveyor, 23" x 7', 6" sides, 19" belt, electric drive

Waste Conveyor and Metal Detector, 17" x 17', 4" sides, 12" belt, electric drive with metal detector controls on wall

Williams Patent Crusher and Pulveriser, Serial # 20007, 24" x 30" top feed hopper, bottom discharge, swing hammers, does not include electric motor

Lincoln Electric Motor, 100 HP, 1785 RPM, 405T frame

*Starter and Disconnect for Hog, 100 HP motor control soft start

6" Tailing Belt, 8" x 26' x 42" high

Wooden slat conveyor at chop saws, 12' x 28' x 60" high, electric drive

Crosscut Solutions Upcut Saw, Model CS14ML, serial # 060811, 7 1/2 HP

*Control For Upcut Saw,

{ Choice of lots: 46, 47, 48, 49 } Crosscut Solutions Upcut Saw, Model CS14ML, serial # 060810, 7 1/2 HP

{ Choice of lots: 46A, 47A, 48A, 49A } *Control For Upcut Saw,

{ Choice of lots: 46, 47, 48, 49 } Crosscut Solutions Upcut Saw, Model CS14ML, serial # 060809, 7 1/2 HP

{ Choice of lots: 46A, 47A, 48A, 49A } *Control For Upcut Saw,

{ Choice of lots: 46, 47, 48, 49 } Crosscut Solutions Upcut Saw, Model CS14ML, serial # 060812, 7 1/2 HP

{ Choice of lots: 46A, 47A, 48A, 49A } *Control For Upcut Saw,

{ Choice of lots: 46, 47, 48, 49 } Crosscut Solutions Upcut Saw, Model CS14ML, serial # 0603-11, 7 1/2 HP

{ Choice of lots: 46A, 47A, 48A, 49A } *Control For Upcut Saw,

Wooden board slat conveyor transfer, 5' x 36' x 60" high, electric drive

Hasko HSEM-C End Matcher system, Serial # 0653308T and serial # 0653308G, 8' x 36', very little use includes dust tree

Waste Conveyor, 9" x 26', 4" sides, 6" belt

Belt Conveyor with Nesting Stations, 14" x 42', 4" sides, 12" belt, electric drive transfers to nesting 6. 7'x 15" nesters.  ...[more]

Belt Conveyor, 51" x 9' x 54" high, electric drive, 30" belt

Wooden Conveyor, 5' x 28' x 50" high