All lot numbers below 500 are located at 131 Thomas RD Ebensburg PA 15931. All lots above 500 are located at 59 Library Ave. Alstead NH 03602

3-phase electric motor

{ Group of lots: 101, 102, 103, 104, 105, 106, 107, 108, 109 } .

{ Group of lots: 101, 102, 103, 104, 105, 106, 107, 108, 109 } Serial # AA

{ Group of lots: 101, 102, 103, 104, 105, 106, 107, 108, 109 } 34 x 65, 15" high

{ Group of lots: 101, 102, 103, 104, 105, 106, 107, 108, 109 } 27" x 53", 4 wheels, 2 swivel

{ Group of lots: 101, 102, 103, 104, 105, 106, 107, 108, 109 } 24" x 53", 4 wheels, 2 swivel

{ Group of lots: 101, 102, 103, 104, 105, 106, 107, 108, 109 } 24" x 53", 4 wheels, 2 swivel

{ Group of lots: 101, 102, 103, 104, 105, 106, 107, 108, 109 } 24" x 53", 4 wheels, 2 swivel

{ Group of lots: 101, 102, 103, 104, 105, 106, 107, 108, 109 } 24" x 53", 4 wheels, 2 swivel

{ Group of lots: 101, 102, 103, 104, 105, 106, 107, 108, 109 } 24" x 53", 4 wheels, 2 swivel

7" x 28" pan, with foot pedal

SVX 9000, 240 volt, 24 amp ...[more]

10' x 8" x 2'3", 43" capacity

Model GR 54, serial # 103129, 14" blade

Model 552515B120S, serial # 019-006-77 (552635), Baldor 15 HP, 3-phase, electric motor, 120 gallon tank

Serial # 16024, glue line ready

Model 500DB, serial # 440-DB-90, 5 HP, 3-phase, electric motor, dust bag included

Model LH16UC, serial # 27940

3 HP, 3-phase motor

Serial # 220107, electric over air, 3/4 HP, single-phase motor

Cat. # P-272, serial # 305354, 5 HP, 3-phase

{ Choice of lots: 121 } Serial # 21455, 15 HP electric motor, 3-phase, 7' capacity

Serial # 10137, 10 HP 3 phase electric motor, 42" capacity

{ Choice of lots: 123 } 10 HP 3 phase electric motor, 42" capacity

{ Group of lots: 124, 124A } Electric motor, etc.

{ Group of lots: 124, 124A } .

{ Choice of lots: 125, 126 } 10 Spindle, 2 HP and 5 HP motors, 3-phase, 72" capacity

{ Choice of lots: 125, 126 } 6 spindle, 3 HP, 3-phase motor, 72" capacity

.

32" x 9' x 7", sliding table, 7" x 312" belts, 5 HP electric motor

7" x 312"

5" x 196" sandpaper

Model FT655P, serial # 78130, 1/2 HP electric motor with foot pedal electric/air

10' capacity, 10 HP electric motors, 3-phase

Model U17A, Machine # 1297-2038, 5 head, 10 HP, 3-phase motors, 5" x 7" capacity, does not include any heads or tooling

1 1/2" shaft, 12-15 heads and tooling

24" blower, 3-phase electric motor

3-phase electric motor

30" x 8', 5 HP 3-phase electric motor

6 bags and barrels only

3-phase

.

.

Hickory Tulip, pencil post, turned ball tops

{ Choice of lots: 142, 143 } 23" long table pedestal, dowel rods, baseball bats

{ Choice of lots: 142, 143 } 11" spindles, miscellaneous

.

.

6 sets of legs, 10 sets of arms, does not include any plywood

14", 12", 16", 22", 1" arbor, 16" with 2" arbor

Serial # 10290, type G, 6000 lb. lift, LP, 2-stage mast, no side shift, 8488 hours, engine was rebuilt at 8040 hours, will be retained for 2 weeks...

{ Group of lots: 400, 401, 402, 403, 404, 405, 406, 407, 408, 409, 410, 411, 412, 413 } 2 5/8" shaft

{ Group of lots: 400, 401, 402, 403, 404, 405, 406, 407, 408, 409, 410, 411, 412, 413 } 2 5/8" shaft, 3 heads

{ Group of lots: 400, 401, 402, 403, 404, 405, 406, 407, 408, 409, 410, 411, 412, 413 } 2 5/8" shaft

{ Group of lots: 400, 401, 402, 403, 404, 405, 406, 407, 408, 409, 410, 411, 412, 413 } 2 5/8" shaft

{ Group of lots: 400, 401, 402, 403, 404, 405, 406, 407, 408, 409, 410, 411, 412, 413 } 2 5/8" shaft

{ Group of lots: 400, 401, 402, 403, 404, 405, 406, 407, 408, 409, 410, 411, 412, 413 } 2 5/8" shaft

{ Group of lots: 400, 401, 402, 403, 404, 405, 406, 407, 408, 409, 410, 411, 412, 413 } 2 5/8" shaft

{ Group of lots: 400, 401, 402, 403, 404, 405, 406, 407, 408, 409, 410, 411, 412, 413 } 2 5/8" shaft