0
FULL CATALOG COMING SOON. REGISTER TODAY.
1/4
Auctioneer has chosen not to publish the price of this lot
South El Monte, California
10.00%
18.00%
Description
Fabrication : Megobal PB63T 63 Ton x 98” CNC Press Brake w/ Comp-U-Bend MDD5-61000 Controlled Back Gaging, 98 ½” Bed Length, 19 3/8” Throat Depth. DiAcro 55-8 55 Ton x 8’ CNC Hydra-Power Press Brake s/n 6550682197 w/ DiAcro CNC Back Gaging System, 100” Bed Length, 8” Throat, 80” Between Uprights. Verson 45 Ton x 8’ Mechanical Press Brake s/n 6854-2078 w/ Manual Back gage, 96” Bed Length, 7 ¼”Throat, 78” Between Uprights. Verson 25 Ton x 78” Press Brake s/n 14513-1062 w/ 78” Bed Length, 7 ½” Shut Height, 2” Stroke, 2” Adj., 7” Throat, 62” Between Uprights, Light Curtain. Heller HS-40-10 14’ Power Shear s/n 54686 w/ 36” Controlled Back Gage, Squaring Arm, Front Supports. Amada H-3065 10’ Hydraulic Power Shear s/n 30650035 w/ Amada Controlled Back Gaging, 78”Squaring Arm. Roper Whitney mdl. 7212 72” Power Shear s/n 260-1077 w/ 24” Dial Back Gage, Front Supports. Niagara 48”Power Shear. (3) Bruderer BSTA-30 30,000kg Cap High Speed Stamping Presses w/ Bruderer Controls, 100-600 Strokes / Min. Bruderer / Kohler mdl. 12-120B 4.72” Cap. Straightener / Feeder. Bruderer / Kohler mdl. 10-120 4.72” Cap. Straightener / Feeder. V & O No. 25ST OBI Stamping Press w/ Pneumatic Clutch, 13 ½” x 24” Bolster. Niagara A3 OBI Stamping Press. 1978 Amada “Torc-Pac 110” Series E-11231 110 Ton Cap Stamping Press (NO CONTROLS) w/ 50 Strokes/Min, 6” Stroke, 3.94” Slide Adj., 16.52” Open Height, Lower Cushion. (4) Famco Kick Punches. Presstronics Dual Feed Coiler. (2) Dallas 2500 Lb Cap x 12” x 48” Coilers. 2011 US Industrial mdl. USI66TDO 66 Ton Ironworker w/ 5/8” x 10” – Max 16” Flat Bar Shear, 1 ¾” Rnd – 1 9/16” Sq Bar Shear, 5” x 5” Channel Shear, 2 ¼” x 4” Coping Notcher, 1 3/32” Thru 3/8” Punch Cap with 12” Throat. Fellows High Speed Gear Shaper w/ 5 ½” Rotary Base. Reed 48” Power Initial Pinch Roll w/ 6” Rolls. Pullmax X91 Plate Beveller w/ 25 Deg to 55 Deg Adjustable Bevel Angle, Roll Feeder. Wire Machine w/ Straightener, Cutoff and Bending Capab. Hydraulic Tube Bender w/ PLC Controls. 1993 Boy mdl. 50T2 50 Ton Plastic Injection Molding Machine s/n 54526 w/ Boy Controls, 4-Heat Zones, 12” x 13” Die Space, 19” x 19” Bolster Area. 1993 Nissui mdl. FNSK-15AP Plastics Granulator s/n F15360. Speed-Fam 32” Lapping Machine w/ (4) 12” Plates. Davis No. 5 Vertical Broaching Machine. Pexto mdl. PS-66 6” x 6” x 16/18GA Corner Notcher s/n 12/73. Roper Whitney AR231 Punch s/n 533174 w/ 24” Throat, 25” x 48” Table. Carolina CBP1200 Hydraulic H-Frame Press s/n CBP5668. Carolina 40 Ton Hydraulic H-Frame Press s/n CF27317. Branson 900 Series mdl. 921AES Ultrasonic Welder. Whittmann “Tempro 2200 Plus” Temperature Controller. Lathes and Mills : Lodge & Shipley T60” Right Angle Chucking Lathe s/n 41150 w/ 6-338 RPM, 11 ½” Thru Spindle Bore, 46”Chuck, Aloris Tool Post. TOS Type SN71B 28” x 90” Geared Head Gap Bed Lathe s/n 071200760374 w/ 10-1000 RPM, Inch Threading, 3” Thru Spindle Gore, Tailstock, Steady Rest, Tool Post, Coolant. LeBlond 16” x 60” Geared Head Lathe s/n NC1243 w/ 20-600 RPM, Taper Attachment, Relieving Attachment, Inch Threading, Tailstock, KDK Tool Post, 10” 3-Jaw Chuck. LeBlond Makino Regal Servo Shift 15” x 38” Lathe s/n 13C-445 w/ 45-1800 RPM, Inch/mm Threading, Tailstock, Trava-Dial, KDK Tool Post, 12” 3-Jaw Chuck. Hercules “SAG 14” 14” x 40” Gap Bed Lathe w/ Anilam Mini Wizard DRO, 45-1500 RPM, Taper Attachment, Inch/mm Threading, Tailstock, KDK Tool Post, 10” 3-Jaw Chuck, 12” 4-Jaw Chuck. Edison 1340GH 13” x 40” Geared Head Lathe w/ 120-2000 RPM, Inch/mm Threading, Tailstock, Aloris Tool Post, 6 ½” 3-Jaw Chuck, Coolant. Republic 12” x 40” Geared Head Lathe s/n AEI-1 w/ Tailstock, KDK Tool Post, 6” 3-Jaw Chuck. SuperMill J Horizontal Boring Mill w/ 30-1000 RPM, 2 ½” Spindle, 50-Taper Spindle, 16 ½” Boring Head, 23 ½” x 35 ½” Indexable Table. Bridgeport Vertical Mill s/n 188712 w/ DRO mdl. DRO II-2ML Programmable DRO, 2Hp Motor, 60-4200 Dial Change RPM, Chrome Ways, Power Feed 9” x 42” Table. Bridgeport Vertical Mill s/n 188712 w/ DRO mdl. DRO II-2ML Programmable DRO, 2Hp Motor, 60-4200Dial Change RPM, Chrome Ways, Power Feed, 9” x 42” Table. Bridgeport Vertical Mill s/n 206529 w/ 60-4200 Dial Lathes and Mills : Bridgeport Vertical Mill s/n 167396 w/ Anilam Mini Wizard DRO, 80-2720 RPM, 8-Speeds, Chrome Ways, Power “X”, “Y” and Knee Feeds, 9” x 42” Table. Birmingham Vertical Mill w/ Sargon Prospector DRO, 90-5600 RPM, 16-Speeds, Chrome Ways, Power Feed, 9” x 42” Table. Yuasa Vertical Mill s/n 52156 w/ 2Hp Motor, 80-2720 RPM, Chrome Ways, Power “X” and Knee Feeds, 9” x 47” Table. Maxmill Vertical Mill s/n 51132 w/ 2Hp Motor, 80- 2720 RPM, Chrome Ways, 9” x 47” Table, 6” Angle- Lock Vise. Kanto Koki “J-Spindle” Vertical Mill w/ 90-2400 RPM, 8-Speeds, Box Ways, 4” Riser, 9” x 42” Table. Kearney &; Trecker / Milwaukee mdl. CH No. 3 Horizontal Mill s/n 5-8357 w/ 15-1500 RPM, 50-Taper Spindle, Power Feeds, 13 ½” x 64” Table. Saws : DoAll C-305NC 10” Automatic Hydraulic Horizontal Band Saw s/n 522-96104 w/ DoAll Controls,Hydraulic Clamping and Feeds, Chip Auger, Coolant. Marvel Series 15 mdl. 15A 15” Hydraulic Horizontal Band Saw s/n D-15638 w/ Marvel Controls. DoAll LR-5320 12” Automatic Hydraulic Horizontal Band Saw w/ UniOP PLC Controls, Hydraulic Clamping and Feeds. DoAll 12” Horizontal Band Saw w/ Manual Clamping, Coolant. Baileigh mdl. BS-260M 9” Horizontal Miter Band Saw s/n 16036112 w/ Manual Clamping, Coolant. KBC mdl. BAH-712 7” Horizontal Band Saw w/ Manual Clamping, Work Stop, Coolant. Tannewitz mdl. 6V1E 35” Vertical Band Saw s/n 83041 w/ Reeves Vari-Drive Speed Controller. DoAll mdl. ML 16” Vertical Band Saw / 24” x 24” Table. Yates American 13” Vertical Band Saw. Promacut / Trennjaeger mdl. UNI-10/60 20” Cutoff Saw s/n 7481. Racine “Hydraulic Shear Cut” 12” Power Reciprocating Saw. Rockwell Delta 14” Radial Arm Saw.Support Machinery : Studer Type S20-12 6” x 12” Cylindrical Grinder s/n 627.26 w/ Motor Driven Head, Tailstock. Heald mdl. 271 Plain Automatic ID Grinder w/ Auto Feeds, Wheel Dresser, (NO CHUCK). Heald No. 25A 18” Rotary Surface Grinder s/n 28412 w/ 18” Rotary Magnetic Chuck. Moore No. 2 Jig Boring Machine s/n 7156 w/ Pneumatic Rotary Grinding Head, 10” x 19” Table, X=17”, Y=11” Travels, Chrome Box Ways. Vollmer CEF Saw Blade Sharpener w/ Vollmer PMCSystems Digital Controls. Hacer Precision Tool Grinder. Fosdick 14”Column x 58” Radial Arm Drill s/n 10926 w/ 20-1406 RPM, Power Column and Feeds, 33” x 74” Base. Tai Piin mdl. TPR-1100 9” Column x 33” Radial Arm Drill s/n 7885 w/ 44-1500 RPM, Power Column and Feeds, Fixture Block. Morris “Mor-Speed” 9” Column x 24” Radial Arm Drill w/ Power Column and Feeds, Fixture Table. Reynolds RMT / Snow Automatic Tapping Machine w/ 24” x 42” Table. Dresser 20Hp Horizontal Air Compressor w/ 3-Stage Pump, 120 Gallon Tank. Ingersoll Rand 15Hp Horizontal Air Compressor w/ 3-Stage Pump, 120 Gallon Tank. 3.5Hp Vertical Air Compressor w/ 60 Gallon Tank. Oliver mdl. 399-D 18” x 6” Planer s/n 65920.& MORE!
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
Fabrication : Megobal PB63T 63 Ton x 98” CNC Press Brake w/ Comp-U-Bend MDD5-61000 Controlled Back Gaging, 98 ½” Bed Length, 19 3/8” Throat Depth. DiAcro 55-8 55 Ton x 8’ CNC Hydra-Power Press Brake s/n 6550682197 w/ DiAcro CNC Back Gaging System, 100” Bed Length, 8” Throat, 80” Between Uprights. Verson 45 Ton x 8’ Mechanical Press Brake s/n 6854-2078 w/ Manual Back gage, 96” Bed Length, 7 ¼”Throat, 78” Between Uprights. Verson 25 Ton x 78” Press Brake s/n 14513-1062 w/ 78” Bed Length, 7 ½” Shut Height, 2” Stroke, 2” Adj., 7” Throat, 62” Between Uprights, Light Curtain. Heller HS-40-10 14’ Power Shear s/n 54686 w/ 36” Controlled Back Gage, Squaring Arm, Front Supports. Amada H-3065 10’ Hydraulic Power Shear s/n 30650035 w/ Amada Controlled Back Gaging, 78”Squaring Arm. Roper Whitney mdl. 7212 72” Power Shear s/n 260-1077 w/ 24” Dial Back Gage, Front Supports. Niagara 48”Power Shear. (3) Bruderer BSTA-30 30,000kg Cap High Speed Stamping Presses w/ Bruderer Controls, 100-600 Strokes / Min. Bruderer / Kohler mdl. 12-120B 4.72” Cap. Straightener / Feeder. Bruderer / Kohler mdl. 10-120 4.72” Cap. Straightener / Feeder. V & O No. 25ST OBI Stamping Press w/ Pneumatic Clutch, 13 ½” x 24” Bolster. Niagara A3 OBI Stamping Press. 1978 Amada “Torc-Pac 110” Series E-11231 110 Ton Cap Stamping Press (NO CONTROLS) w/ 50 Strokes/Min, 6” Stroke, 3.94” Slide Adj., 16.52” Open Height, Lower Cushion. (4) Famco Kick Punches. Presstronics Dual Feed Coiler. (2) Dallas 2500 Lb Cap x 12” x 48” Coilers. 2011 US Industrial mdl. USI66TDO 66 Ton Ironworker w/ 5/8” x 10” – Max 16” Flat Bar Shear, 1 ¾” Rnd – 1 9/16” Sq Bar Shear, 5” x 5” Channel Shear, 2 ¼” x 4” Coping Notcher, 1 3/32” Thru 3/8” Punch Cap with 12” Throat. Fellows High Speed Gear Shaper w/ 5 ½” Rotary Base. Reed 48” Power Initial Pinch Roll w/ 6” Rolls. Pullmax X91 Plate Beveller w/ 25 Deg to 55 Deg Adjustable Bevel Angle, Roll Feeder. Wire Machine w/ Straightener, Cutoff and Bending Capab. Hydraulic Tube Bender w/ PLC Controls. 1993 Boy mdl. 50T2 50 Ton Plastic Injection Molding Machine s/n 54526 w/ Boy Controls, 4-Heat Zones, 12” x 13” Die Space, 19” x 19” Bolster Area. 1993 Nissui mdl. FNSK-15AP Plastics Granulator s/n F15360. Speed-Fam 32” Lapping Machine w/ (4) 12” Plates. Davis No. 5 Vertical Broaching Machine. Pexto mdl. PS-66 6” x 6” x 16/18GA Corner Notcher s/n 12/73. Roper Whitney AR231 Punch s/n 533174 w/ 24” Throat, 25” x 48” Table. Carolina CBP1200 Hydraulic H-Frame Press s/n CBP5668. Carolina 40 Ton Hydraulic H-Frame Press s/n CF27317. Branson 900 Series mdl. 921AES Ultrasonic Welder. Whittmann “Tempro 2200 Plus” Temperature Controller. Lathes and Mills : Lodge & Shipley T60” Right Angle Chucking Lathe s/n 41150 w/ 6-338 RPM, 11 ½” Thru Spindle Bore, 46”Chuck, Aloris Tool Post. TOS Type SN71B 28” x 90” Geared Head Gap Bed Lathe s/n 071200760374 w/ 10-1000 RPM, Inch Threading, 3” Thru Spindle Gore, Tailstock, Steady Rest, Tool Post, Coolant. LeBlond 16” x 60” Geared Head Lathe s/n NC1243 w/ 20-600 RPM, Taper Attachment, Relieving Attachment, Inch Threading, Tailstock, KDK Tool Post, 10” 3-Jaw Chuck. LeBlond Makino Regal Servo Shift 15” x 38” Lathe s/n 13C-445 w/ 45-1800 RPM, Inch/mm Threading, Tailstock, Trava-Dial, KDK Tool Post, 12” 3-Jaw Chuck. Hercules “SAG 14” 14” x 40” Gap Bed Lathe w/ Anilam Mini Wizard DRO, 45-1500 RPM, Taper Attachment, Inch/mm Threading, Tailstock, KDK Tool Post, 10” 3-Jaw Chuck, 12” 4-Jaw Chuck. Edison 1340GH 13” x 40” Geared Head Lathe w/ 120-2000 RPM, Inch/mm Threading, Tailstock, Aloris Tool Post, 6 ½” 3-Jaw Chuck, Coolant. Republic 12” x 40” Geared Head Lathe s/n AEI-1 w/ Tailstock, KDK Tool Post, 6” 3-Jaw Chuck. SuperMill J Horizontal Boring Mill w/ 30-1000 RPM, 2 ½” Spindle, 50-Taper Spindle, 16 ½” Boring Head, 23 ½” x 35 ½” Indexable Table. Bridgeport Vertical Mill s/n 188712 w/ DRO mdl. DRO II-2ML Programmable DRO, 2Hp Motor, 60-4200 Dial Change RPM, Chrome Ways, Power Feed 9” x 42” Table. Bridgeport Vertical Mill s/n 188712 w/ DRO mdl. DRO II-2ML Programmable DRO, 2Hp Motor, 60-4200Dial Change RPM, Chrome Ways, Power Feed, 9” x 42” Table. Bridgeport Vertical Mill s/n 206529 w/ 60-4200 Dial Lathes and Mills : Bridgeport Vertical Mill s/n 167396 w/ Anilam Mini Wizard DRO, 80-2720 RPM, 8-Speeds, Chrome Ways, Power “X”, “Y” and Knee Feeds, 9” x 42” Table. Birmingham Vertical Mill w/ Sargon Prospector DRO, 90-5600 RPM, 16-Speeds, Chrome Ways, Power Feed, 9” x 42” Table. Yuasa Vertical Mill s/n 52156 w/ 2Hp Motor, 80-2720 RPM, Chrome Ways, Power “X” and Knee Feeds, 9” x 47” Table. Maxmill Vertical Mill s/n 51132 w/ 2Hp Motor, 80- 2720 RPM, Chrome Ways, 9” x 47” Table, 6” Angle- Lock Vise. Kanto Koki “J-Spindle” Vertical Mill w/ 90-2400 RPM, 8-Speeds, Box Ways, 4” Riser, 9” x 42” Table. Kearney &; Trecker / Milwaukee mdl. CH No. 3 Horizontal Mill s/n 5-8357 w/ 15-1500 RPM, 50-Taper Spindle, Power Feeds, 13 ½” x 64” Table. Saws : DoAll C-305NC 10” Automatic Hydraulic Horizontal Band Saw s/n 522-96104 w/ DoAll Controls,Hydraulic Clamping and Feeds, Chip Auger, Coolant. Marvel Series 15 mdl. 15A 15” Hydraulic Horizontal Band Saw s/n D-15638 w/ Marvel Controls. DoAll LR-5320 12” Automatic Hydraulic Horizontal Band Saw w/ UniOP PLC Controls, Hydraulic Clamping and Feeds. DoAll 12” Horizontal Band Saw w/ Manual Clamping, Coolant. Baileigh mdl. BS-260M 9” Horizontal Miter Band Saw s/n 16036112 w/ Manual Clamping, Coolant. KBC mdl. BAH-712 7” Horizontal Band Saw w/ Manual Clamping, Work Stop, Coolant. Tannewitz mdl. 6V1E 35” Vertical Band Saw s/n 83041 w/ Reeves Vari-Drive Speed Controller. DoAll mdl. ML 16” Vertical Band Saw / 24” x 24” Table. Yates American 13” Vertical Band Saw. Promacut / Trennjaeger mdl. UNI-10/60 20” Cutoff Saw s/n 7481. Racine “Hydraulic Shear Cut” 12” Power Reciprocating Saw. Rockwell Delta 14” Radial Arm Saw.Support Machinery : Studer Type S20-12 6” x 12” Cylindrical Grinder s/n 627.26 w/ Motor Driven Head, Tailstock. Heald mdl. 271 Plain Automatic ID Grinder w/ Auto Feeds, Wheel Dresser, (NO CHUCK). Heald No. 25A 18” Rotary Surface Grinder s/n 28412 w/ 18” Rotary Magnetic Chuck. Moore No. 2 Jig Boring Machine s/n 7156 w/ Pneumatic Rotary Grinding Head, 10” x 19” Table, X=17”, Y=11” Travels, Chrome Box Ways. Vollmer CEF Saw Blade Sharpener w/ Vollmer PMCSystems Digital Controls. Hacer Precision Tool Grinder. Fosdick 14”Column x 58” Radial Arm Drill s/n 10926 w/ 20-1406 RPM, Power Column and Feeds, 33” x 74” Base. Tai Piin mdl. TPR-1100 9” Column x 33” Radial Arm Drill s/n 7885 w/ 44-1500 RPM, Power Column and Feeds, Fixture Block. Morris “Mor-Speed” 9” Column x 24” Radial Arm Drill w/ Power Column and Feeds, Fixture Table. Reynolds RMT / Snow Automatic Tapping Machine w/ 24” x 42” Table. Dresser 20Hp Horizontal Air Compressor w/ 3-Stage Pump, 120 Gallon Tank. Ingersoll Rand 15Hp Horizontal Air Compressor w/ 3-Stage Pump, 120 Gallon Tank. 3.5Hp Vertical Air Compressor w/ 60 Gallon Tank. Oliver mdl. 399-D 18” x 6” Planer s/n 65920.& MORE!
CNC MACHINE TOOLS AND FABRICATION
Sale Date(s)
Venue Address
9703 Alesia St.
South El Monte
California
California
United States
For American Auctioneers Group delivery information please telephone (818) 763-2021.
Important Information
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
- Monday – Thursday, 8:00 AM EST – 10:00 PM EST
- Friday, 8:00 AM EST – 6:30 PM EST
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms and Conditions
Terms and Conditions
BY REGISTERING TO BID ON LINE, ALL Registered BIDDERS ARE AGREEING TO ALL THE FOLLOWING TERMS AND CONDITIONS:
1) If registering online, all registered bidders must provide email address and fax number in order to process proper invoice.
2) Bidders by registering assume a legal responsibility to pay for lots sold to him with no exchanges, refunds, adjustments, or refusals.
PURCHASERS ARE TO SATISFY THEMSELVES AS TO CONDITIONS, QUALITY AND DESCRIPTION OF LOTS BEFORE BIDDING.
3) All lots are offered AS IS, WHERE IS, and become the property and responsibility of the bidder at time of the sale.
All lots to be sold as shown, with all faults, imperfections and errors of description. All SALES ARE FINAL.
4) No warranties or guarantees, expressed or implied are made by the auctioneer, concerning the accurace of description, genuineness, authenticity, or condition of lots.
5) A 18% BUYERS PREMIUM WILL BE PAID BY THE BUYER AS PART OF THE PURCHASE PRICE.
6) American Auctioneers Group, Inc. are not responsible for accidents, damage or loss of any kind to bidders, persons online or their property. We cannot be responsible and assume no liability for the packing, loading or securing of merchandise to your vehicle or truck.
All winning bidders are responsible to hire an insured rigger for the removal of items.
7) All purchases must be removed from the premises in the time allocated, as announced by the auctioneer.
8) A deposit of 25% of purchases will be required of every buyer. The deposit and final payment must be paid for by CASH, CASHIER'S CHECK OR WIRE TRANSFER BEFORE REMOVAL.
Deposits will not be returned if, items are not removed or paid for within the time announced or posted.
9) All buyers shall, at the time of purchase pay any state and local taxes, unless documentation is on file with AAG exempting from such taxes.
10) While quantities and description are believed to be correct, there are no guarantees and the auctioneers, owners, and advertising counsel will not be held responsible for advertising discrepancies, inaccuracies or failure of merchandise to correspond with any standard expected. All lots shall auctioned and bid upon lot number.
11) The auctioneer shall in no event be liable to the purchaser for non delivery of any lot for any reason except for the return to the purchaser of the deposit or money paid on such non delivered lots.
.
ANY ITEMS NOT REMOVED ON OR BEFORE THE REMOVAL DATE SHALL BE DEEMED ABANDONED AND WILL BE REMOVED AND SCRAPPED AT THE BUYERS EXPENSE
12) ALL SALES IN U.S. DOLLARS ONLY
13) If you do not have a credit card to register with bidspotter, then please call our office at 818-763-2021 and make arrangements to overnight checks.
14) PAYMENTS MUST BE MADE OR WIRE INITIATED BY CLOSE OF BUSINESS THE DAY AFTER THE SALE. Credit card authorization and company checks (not accompanied by bank letter) are for deposit only, and in the case of company checks (not accompanied by bank letters), will be returned to customer once full payment in cash, cashier's check or wire transfer is made.
INTERNET BUYERS PREMIUM IS 18%.
ALL SALES TAX WILL BE SUBJECT TO LOCAL SALES TAX.
AAG OFFICE NUMBER IS 818-763-2021
AAG FAX NUMBER IS 818-291-9495
Cash, Cashier check, or Wire transfer ONLY.
Credit Card is required for registrations but cannot be used for purchases.
