1995 Fadal VMC 3060HT mdl. 907 CNC Vertical Machining Center s/n 9506979 w/ Fadal CNC32MP Controls, 21-Station ATC, CAT-40 Taper Spindle, Dual Flo...

OOYA RE-2M CNC Vertical Machining Center s/n 835415 w/ GN-Fanuc 6 Series Controls, 32-Station ATC, CAT-50 Taper Spindle, Oilmatic Oil Cooler, 33” ...

1997 Fadal VMC 4020 mdl. 906-1 CNC Vertical Machining Center s/n 9707398 w/ Fadal CNC88HS Controls, 21-Station ATC, CAT-40 Taper Spindle, 28” Exte...

1997 Fadal VMC 4020 mdl. 906-1 CNC Vertical Machining Center s/n 9707399 w/ Fadal CNC88HS Controls, 21-Station ATC, CAT-40 Taper Spindle, Hand Whe...

{ Group of lots: 88, 89, 90 } } } Daewoo PUMA 10S CNC Turning Center s/n 830005 w/ Fanuc System 11TControls, 12-Station Turret, Hydraulic Tailsto...

{ Group of lots: 88, 89, 90 } } } S-26 Collet Pad Nose

Enshu VMC 610 CNC Vertical Machining Center s/n 126 w/ Fanuc System 6M Controls, 30-Station ATC, CAT-50 Taper Spindle, Hand Wheel, 24” x 55” Table...

Bridgeport Vertical Mill s/n 205142 w/ Bridgeport DRO, 2Hp Motor, 60-4200 Dial Change RPM, Chrome Ways, Power Feed, 9” x 42” Table

Enshu VMC 650 CNC Vertical Machining Center s/n 132 w/ Fanuc System 11M Controls, 30-Station ATC, CAT-50 Taper Spindle, Hand Wheel, 26” x 63” Tab...

Enshu VMC 650 CNC Vertical Machining Center s/n 141 w/ Fanuc System 11M Controls, 30-Station ATC, CAT-50 Taper Spindle, Hand Wheel, 26” x 63” Tab...

Lathe Tooling

Collet Pad Sets

{ Group of lots: 115, 116 } } } Northfield Pneumatic 4” 3-Jaw Chuck and 6” 2-Jaw Chuck

{ Group of lots: 115, 116 } } } 6” 3-Jaw Chucks (2)

{ Group of lots: 117, 118, 119, 120 } } } 5” 3-Jaw Chucks (2)

{ Group of lots: 117, 118, 119, 120 } } } 5” 3-Jaw Chuck and 5” 4-Jaw Chuck

{ Group of lots: 117, 118, 119, 120 } } } Misc Lathe Tooling

{ Group of lots: 117, 118, 119, 120 } } } Face Plates

Lathe Tooling and Cabinets

Dayton Bench Grinders (2) w/ Bench

{ Group of lots: 136, 137 } } } CAT-40 Taper Insert Shell Mills (4)

{ Group of lots: 136, 137 } } } CAT-40 Taper Collet Chucks (6)

{ Group of lots: 138, 139 } } } CAT-40 Taper Collet Chucks (10)

{ Group of lots: 138, 139 } } } CAT-40 Taper Collet Chucks (10)

{ Group of lots: 140, 141 } } } CAT-40 Taper Collet Chucks (6)

{ Group of lots: 144, 145, 146 } } } Fadal Carrousel Protectors

{ Group of lots: 147, 148 } } } CAT-50 Taper Tapping Heads(2) and Tap Holders

{ Group of lots: 149, 150 } } } CAT-50 Taper Tapping Heads(2) and Tap Holders

{ Group of lots: 151, 152 } } } CAT-50 Taper Collet Chucks (10)

{ Group of lots: 193, 194 } } } 10" 3-Jaw Chuck

{ Group of lots: 193, 194 } } } 8" 6-Jaw Chuck (NEEDS 1 JAW) and 8" 3-Jaw Chuck

5C Spin Fixtures (2)

Bridgeport 90 Deg Milling Head

{ Group of lots: 222, 223, 224 } } } Lathe Tooling

{ Group of lots: 233, 234, 235, 236, 237, 238 } } } Step Chuck Adaptors

{ Group of lots: 233, 234, 235, 236, 237, 238 } } } 5C Step Chucks

{ Group of lots: 233, 234, 235, 236, 237, 238 } } } 5C Step Chucks

{ Group of lots: 239, 240, 241 } } } 5C Expanding Mandrels

{ Group of lots: 239, 240, 241 } } } 5C Expanding Mandrels

{ Group of lots: 239, 240, 241 } } } 5C Expanding Mandrels

{ Group of lots: 244, 245, 246, 247 } } } Lock-Line Coolant Hose

{ Group of lots: 244, 245, 246, 247 } } } Mill Stops