Ingersoll-Rand Type 30 Mdl. 253 Air Compressor, Horizontal Tank Mounted (Located in Levittown, PA Facility)(There will be a $200 Rigging/Loading F...

Rockwell Delta Mdl. 15-655 Drill Press, Pedestal Mounted, 7-1/2" Throat, 15" Swing, 11" x 14" Table, Spindle Speeds 300 to 4700 (Located in Levitt...

Clausing Mdl. 2276 Drill Press, Pedestal Mounted, 10" Throat, 20" Swing, 22" x 20" T-Slot Table with 1-1/2" Drip Lip, Spindle Speeds 150 to 2000 R...

Spindle Wizard Series 2 CNC Vertical Milling Machine, 51" x 13" T-Slot Table, Dana Summit Controls (Machine Does NOT Operate) (Located in Levittow...

Okuma & Howa ACT 4 CNC Turning Center, Approx. 21" Swing Over Bed, 28" Turning Length, 12-Station Turret, Fanuc Systems 3T Controls including Cart...

H.E.S. Lathe, 16"Diameter Swing, 70" Between Centers, 10"Diameter Swing over Carriage, 1-1/2"Diameter Hole through Spindle, Carriage, Steady Rest,...

Clausing Colchester Lathe, 16"Diameter Swing, 50" Between Centers, 10"Diameter Swing over Carriage, 2"Diameter Hole through Spindle, Carriage with...

Clausing Tool Room Lathe, 12"Diameter Swing, 24" Between Centers, 6"Diameter Swing over Carriage, Carriage with Quick Change Tool Post, Turret and...

Lot with (4) Square Indexing Turret Tool Posts (Located in Levittown, PA Facility)

Lot with Square Indexing Turret Tool Post and Quick Change Tool Posts (Located in Levittown, PA Facility)

Lot with New and Used Tool Holders (Located in Levittown, PA Facility)

Various Tool Holders (Located in Levittown, PA Facility)

Various Tool Holders (Located in Levittown, PA Facility)

Various Tool Holders (Located in Levittown, PA Facility)

CAT 30 Tool Holders and Tooling (Located in Levittown, PA Facility)

Lot of Double End End Mills (Located in Levittown, PA Facility)

Lot of End Mills (Located in Levittown, PA Facility)

Lot of Assorted Taps (Located in Levittown, PA Facility)

Lot of Assorted New and Used Taps (Located in Levittown, PA Facility)

Lot of Assorted Inserts (Located in Levittown, PA Facility)

Lot with (3) Sets of Drill Indexes along with Drill Bits (Located in Levittown, PA Facility)

Various Centers and Holders (Located in Levittown, PA Facility)

Kennedy Portable Tool Cabinet, 7-Drawer with Large Quantity of Tooling (Located in Levittown, PA Facility)

Bijur Speedbit Spraymist Deep Drill Unit with Tooling (Located in Levittown, PA Facility)

Various Spades and Tooling (Located in Levittown, PA Facility)

Dumore Mdl. 10-251 Hand Grinder (Located in Levittown, PA Facility)

Top and Bottom Deburring Bits (Located in Levittown, PA Facility)

Lot with (2) Die Heads and Tooling (Located in Levittown, PA Facility)

De Vlieg Spiramatic Jigmils Tool (Located in Levittown, PA Facility)

Tapping Head (Located in Levittown, PA Facility)

Holex Cutter with Tooling (Located in Levittown, PA Facility)

Sunnen Mdl. MC-1802 Precision Hone with Hole Gage and Cabinet Full of Tooling (Located in Levittown, PA Facility)(There will be a $350 Rigging/Loa...

Boyer-Schultz Challenger Delux 2A Hydraulic Surface Grinder with 18" x 6" Magnetic Chuck and Hydraulic Tank (Located in Levittown, PA Facility)(Th...

Wissota 1/2HP Double Ended Pedestal Grinder (Located in Levittown, PA Facility)

Lot with (5) Barrels of Assorted Steel and Stainless Steel (Located in Levittown, PA Facility)

Barrel with Scrap Inconel X750 (Located in Levittown, PA Facility)

Namco Mdl. 2015 Fork Lift, 2000Lb Capacity, 15" Load Center (Located in Levittown, PA Facility)

Chemical Storage Container, Outside Dimensions 45'-4"L x 11'-3"W x 8'-8"T (Located in Morrisville, PA Facility)(There will be a $450 Rigging/Loadi...

Jorgensen Wooden Clamps including (11) 16" Clamps, (10) 14" Clamps, (1) 12" Clamp and (1) 10" Clamp (Located in Morrisville, PA Facility)

Reliant Mdl. NN830 Bag Style Dust Collector, Dual Bag (Located in Morrisville, PA Facility)(There will be a $150 Rigging/Loading Fee added to your...

Donaldson Torit Mdl. VS1200 Vibra Shake Cartridge Dust Collector (Located in Morrisville, PA Facility)(There will be a $150 Rigging/Loading Fee ad...

Ingersoll Rand Mdl. SSR-EP25U Rotary Screw Air Compressor, 25HP, Capacity 94 CFM, 230/460 Volts 3Ph (Located in Morrisville, PA Facility)(There wi...

Joy Twistair Mdl. TA-030BA141TH Air Compressor, 30HP, Listed Hours 27,627 (Located in Morrisville, PA Facility)(There will be a $150 Rigging/Loadi...

Graymills Mdl. TH24205LP-B Parts Washer, Internal Area 24" x 24" x 24" (Located in Morrisville, PA Facility)(There will be a $100 Rigging/Loading ...

Sunnen Mdl. LBA650 Precision Honing Machine (Located in Morrisville, PA Facility)(There will be a $50 Rigging/Loading Fee added to your Invoice fo...

Sunnen Mdl. MBB1600MS Precision Honing Machine with Cabinet and Box of Tooling (Located in Morrisville, PA Facility)(There will be a $300 Rigging/...

Lapmaster Mdl. 12 Lapping Machine (Located in Morrisville, PA Facility)(There will be a $50 Rigging/Loading Fee added to your Invoice for this Ite...

National 48" x 14 Gauge Shear, Front Extension Arm, Manual Back Gauge (Located in Morrisville, PA Facility)(There will be a $150 Rigging/Loading F...

MSC Vertical Milling Machine, Knee Type, 9" x 42" T-Slot Table with Power Cross Feed, Spindle Speed 80 to 4200 RPM, Anilam Wizard 100 Digital Read...

Dah Lih Mdl. DL-V1200 Vertical Mill, 16" x 72" T-Slot Table, 12-Spindle Speeds, Digital Read Out (Vise is NOT Included) (Located in Morrisville, P...

Farrel 60-Ton Heated Top and Bottom Platen Hydraulic Press, Platens 36"LR x 36"FB, Upstroke Type with 16"Diameter Cylinder, 4-Post 37-1/2"LR x 16"...

300-Ton Heated Top and Bottom Platen Hydraulic Press, Platens 96"LR x 51"FB, Upstroke Type with 18"Diameter Cylinder, Allen Bradley Pannelview 550...

700-Ton Heated Top and Bottom Platen Hydraulic Press used for making Abrasive Wheels and Blades, Top and Bottom Platen 35"FB x 32"RL, Single Cylin...

400-Ton Heated Top and Bottom Platen Hydraulic Press used for making Abrasive Wheels and Blades, Top and Bottom Platen 27"FB x 24"RL, Single Cylin...

300-Ton Heated Top and Bottom Platen Hydraulic Press used for making Abrasive Wheels and Blades, 4-Post Type, Top and Bottom Platen 30"FB x 22"RL,...

Large Quantity of Abrasive Wheel and Blade Dies, Molds and Weights (Located in Broomall, PA Facility)

Hobart Mdl. H-600T Industrial Mixer used for Mixing Abrasive Compounds, Includes (2) Bowls (Located in Broomall, PA Facility)(There will be a $150...

Industrial Mixer used for Mixing Abrasive Compounds, Includes (6) Bowls (Located in Broomall, PA Facility)(There will be a $150 Rigging/Loading Fe...

Abrasive Compound Mixing Station with Funnel and Platform Scale, 12" x 12" Platform (Located in Broomall, PA Facility)

GSE Mdl. 350 Digital Scale with 14-1/2" x 14-1/2" Platform (Located in Broomall, PA Facility)