15hp hydraulic powerpack, with reservoir.

40hp hydraulic pump with close couple drive motor.

40hp hydraulic pump with close couple drive motor.

40hp hydraulic pump with close couple drive motor.

40hp hydraulic pump with close couple drive motor.

40hp hydraulic pump with close couple drive motor.

40hp hydraulic pump with close couple drive motor.

40hp hydraulic pump with close couple drive motor.

CM series 640 manual chain hoist, 1 ton maximum capacity, mild steel construction.

Alden 5th wheel jack, mild steel construction.

Rice Lake platform scale, 36" x 36" platform.

Rice Lake platform scale, 36" x 48" platform.

Micro Motion model 150S-SS-CLAMP FTG flow meter, serial number 88142, 2" Tri-Clover fittings, temperature range of 204-240 degrees Fahrenheit, 150...

Micro Motion mass flow meter, model number CMF300M355NRAUEZZZ, sensor serial number 479464, 3” flanged fitting, with sensor, all stainless steel c...

Micro Motion mass flow meter, model number DL200S226SU, serial number 238326, 2” Tri-Clover fittings, with sensor, all stainless steel constructio...

Micro Motion mass flow meter, model number DL200S226SUR, serial number 198543, 2” Tri-Clover fittings, with sensor, serial number 198549, all stai...

Micro Motion mass flow meter, model number DL200S226SU, serial number 950713, 2” Tri-Clover fittings, with sensor, serial number 189346, all stain...

Micro Motion mass flow meter, model number DL200S226SU, serial number 189098, 2” Tri-Clover fittings, with sensor, serial number 189098, all stain...

Micro Motion model L100S202 mass flow meter, serial number 112175, with remote flow transmitter, model number RFT9739, serial number 1518437, Alle...

Micro Motion model F050S113SRAUEZZZZ flow meter, serial number 532517, 1/2" flanged fittings, temperature range of 150 to 240 degrees Celsius, wit...

Lot of 14 each 2” product valves, Tri-Clover and I-line available, all stainless steel construction, priced each.

Groen model CC20-E convection combo, serial number 06844 MS, 240 volt, built 1997, touchpad controls, 28” x 24” x 21” chamber.

American Sterilizer model LS-1624 jacketed autoclave, serial number 225064, 15-1/2" diameter x 24" deep, with temperature gauge, 50-70 pounds of s...

Blue M electric Co gravity oven, 9" wide x 15" high x 19-1/2" deep baking area, dial controls, 110 volts, stainless steel contact, mild steel fram...

FLSMidth Minerals separator, serial number SSP7728, max OP 75 PSIG, mild steel construction.

Sargent-Welch DirecTorr model 8806 deairator, serial number 3095, 1/3 HP electric motor drive, 1725 RPM, single phase, 115/230 volts, 4 gallon sta...

Fliers Quality Water Systems Reverse Osmosis (RO) system, 6 bank unit with 4” diameter x 10’ long cartridges, 1” schedule 40 plastic fittings and ...

Goodway model RAM-4-60 rotary chiller tube cleaner, serial number 027256, 1/2 HP motor drive, 115 volts, 50 Hz, single phase, includes dolly, sing...

Totaline Totalvac refrigerant recovery unit.

Masoneilan Camflex 2 rotary control valve, model number 35-35212, serial number A13-23248, size 3, 3” flanged fittings, air to open, 7-15 PSI supp...

Masoneilan Camflex 2 rotary control valve, model number 35-35212, serial number A14-24225, size 3, 3” flanged fittings, air to open, 7-15 PSI supp...

Cochrane size 12 multiport valve, 12” flanged fitting, 60,000 pound capacity, body construction rated at 25 PSI at 350 degrees fahrenheit, spring ...

Cochrane size 12 multiport valve, 12” flanged fitting, 60,000 pound capacity, body construction rated at 25 PSI at 350 degrees fahrenheit, spring ...

Jacobson model P-240DTF Hammermill, serial number 33886, 8” diameter flanged infeed, 60 HP electric motor direct drive, 3555 RPM, 60 Hz, 3 phase, ...

Flex-Kleen dust collector, model number 58-BVBS-36, serial number 11163, PO number 2208W005, with Magnehelic air pressure gauge, 36 each 6” diamet...

Flex-Kleen dust collector, model number 58-BVBS-25, serial number 11162, PO number 2208W005, with Magnehelic air pressure gauge, 36 each 6” diamet...

Flex-Kleen dust collector, model number 58-BVBS-36, serial number 11163, PO number 2208W005, with Magnehelic air pressure gauge, 36 each 6” diamet...

Flex-Kleen dust collector, model number 58-BVBS-36, serial number 11163, PO number 2208W005, with Magnehelic air pressure gauge, 36 each 6” diamet...

Flex-Kleen dust collector, model number 58-BVBS-36, serial number 11163, PO number 2208W005, with Magnehelic air pressure gauge, 36 each 6” diamet...

Stainless steel screened dump station, 25" wide x 25" long x 33" deep, cone bottom, 12" straight pipe infeed, 6" flanged discharge, pneumatic vibr...

Young self-contained filter/bag dump station, serial number FBD-680, shop number 8406, customer number 4-38481, 24" wide x 44" long x 27" deep dum...

Gump model CP43 pressure sifter, serial number CPPV-2362, 48" diameter, 6" straight pipe infeed, 4" and 5" side bottom discharges, 1/64" perforati...

60 gallon compression tank, model number 1TZZ7, serial number L12-6-10-00039, 200 PSI max, with pressure relief valve, mild steel construction.

AZO negative air cyclone separator with rotary valve, 21" diameter x 43" deep cone, 3" Tri-Clover feed port, 7-1/2" diameter flanged discharge, 1/...

DuraFlow mild steel positive displacement blower, model number CCDAADA, serial number S150584, 3" flanged fittings, 4000 max RPM, 20 HP electric m...

Kice mild steel air lock, model number 104333, serial number 33250-0102, 11" x 11" flanged fittings, 8" diameter pipe infeed, 2 each 3" diameter s...

Stainless steel cyclone, 36" diameter x 66" tall, 8" diameter vacuum ports, 5" x 5" bottom discharge, 18" x 18" cleanout port, with Vibco 320 pneu...

Hartzell blower, aluminum construction, 7.5hp belt drive, 52” diameter intake, 54” x 40” exhaust, squirrel cage style fan.

Sutorbilt blower, model number 4MP, serial number S044642, 4" pipe fittings, 7-1/2 HP electric motor belt drive, 1760 RPM, with Standard Silencer ...

Sweco model ZS24SA4 20" diameter separator, serial number 728487-A699, 1/16" perforated screens, 1/3 HP electric motor drive, 460 volts, Sweco num...

Vac-U-Max mobile vacuum conveying system, 3-1/2” Tri-Clover side infeed, 6” product discharge, 15-1/2” diameter x 21” deep vessel with additional ...

Vac-U-Max mobile vacuum conveying system, 3-1/2” Tri-Clover side infeed, 6” product discharge, 15-1/2” diameter x 21” deep vessel with additional ...

Care Controls Canalyzer model MTB dud detector, serial number 970019, currently set on 211 x 404 can size, rated for 800 cans per minute, 4” wide ...

Care Controls Canalyzer model MTB dud detector, model number MTB IEDE, serial number 3399, manufactured in 1996, currently set on 300 can size, ra...

Stainless steel can washer, set on 300 x 407 can size, 72" long wash zone, requires spray heads, all stainless steel construction.

30” wide x 9’ long stainless steel sorting conveyor, sloped sides, 1.5hp gearhead drive, with overhead sorting light, 33” high infeed, 40” high di...

34” wide x 118” long sorting belt conveyor, includes a 7” x 29 ½” magnet over belt discharge, food grade belt, hopper infeed at 78”, hopper measur...

34” wide x 118” long sorting belt conveyor, food grade belt, all stainless steel construction.

34" wide x 9-1/2' long stainless steel inspection conveyor, sloped sides, with a 5" x 25" magnet, gearhead drive, with discharge hopper with swing...

34” wide x 8.5’ long stainless steel sorting conveyor, slopped sides with movable feed hopper on trolley and platform, 5” x 27” magnet, Interroll ...