Refine your search

Estimate

Filter by Price Range

Primary Category

Category

Brand

Item Type

State/Province

Auction Details

Pharmaceutical Process Equipment - On-Line Only Auction for Major Manufacturer

Proxio Group Timed Online Auction Ended 08 Apr 2020 12:27 ET (17:27 BST)

Sale Date(s)

  • Ended 08 Apr 2020 12:27 ET (17:27 BST)
Ohio

Venue Address

  • Ohio
  • United States

Auction Details

Important Information Terms & Conditions Print Catalogue
Currency: USD
Buyer's premium: 15.00%
VAT/sales tax on hammer: 15.00%

Auctioneer Details

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
There are 124 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240
Page of 3

This auctioneer has chosen to not publish their results. Please contact them directly for any enquiries.

MGS outserter, model RPP-2210, 230 volt, 2 head rotary feeder, 60" powered feeder, serial# 5888, built 1997 with Nordson gluer, model 3400. **A...

IPR tablet press tooling inspection unit, type TIAS, model APF-0602 with computer, serial# 00TIA62-WAPR. As Is. **AUCTIONEERS NOTE** Load-Ou...

Used 84" long x 4.5" wide Leister drying conveyor, stainless steel construction with carbon steel belt, (2) 2.3 kW Leister heater/blowers, coolin...

96 gallon A&B reactor, stainless steel construction, approximately 28" diameter x 36" straight side, hinged dish top, dish bottom, rated 45 psi a...

9 gallon plastic tank, approx. 12" diameter x 16" straight side, removable flat top, dish bottom, (2) 2", (1) 5.5" top nozzles, 1" center bottom ...

65 gallon Walker tank, 304 stainless steel construction, approximately 28" diameter x 28" straight side, open top with lid, slant bottom, 1" bot...

Dober Group CIP system, chematic design, stainless steel construction with (2) 1/2 HP circulation pumps, flow data control sensor, PLC controller...

30 liter QVF agitated glass receiver, Duran 6076-11 glass, 300 mm diameter x 650 mm deep bowl, removable clamp on dish top, dish bottom, indicati...

Used Virtis freeze dryer, model RS-SRC-3MS, stainless steel construction, 4 sq ft shelf area, (3) 12" x 18" shelves, with stoppering, 25# ice cap...

Sepha Deblistering Machine, (5) lane, 220 volt, with spare rollers and clinical trial change parts. **AUCTIONEERS NOTE** Load-Out Fee for thi...

Carr Powerfuge centrifuge, model P6, 316L Ti-GAL-4V construction, 60 liter/hour max flow rate, 1.1 liter bowl volume, 1 liter (nominal) solids ca...

PIAB portable vacuum loading station, stainless steel construction with receiver and vacuum pump mounted on portable cart with 4' x 4' Mettler sc...

Collette planetary mixer, model MP 20, stainless steel bowl, beater and dust shroud, xp design, class 1, div 2, group g on portable base, serial#...

Fluid air high shear granulating mixer, model PX1, stainless steel construction, (2) 13.8 liter total capacity, 12 liter working capacity, jacket...

Koruma high shear colloid mill, model V 100/25, stainless steel construction, approximately 25 liter capacity feed hopper, stainless steel constr...

200 liter (52.84 gallon) Sartorius fermeter system, model 200 LDP, stainless steel construction, approximately 24" diameter x 36" straight side, ...

Zanchetta high shear granulating mixer, model Rotolab, stainless steel construction, 1.8 liter jacketed swivel bowl, top mounted chopper, 1.5 Mpa...

Perkin Elmer Optima 2100 DV ICP - OES Spectrometer Inductively Coupled Plasma - Optical Emission Spectrometry unit, Part # NO800541 ...

Unused Binder incubator, model BF 115-UL, 4.1 cu ft capacity, .4 kw, 115 volt heater, rated to 212 f, approximately 15.5" deep x 23.75" wide x 8"...

18" Kason Screen, model K-18-2-SS, stainless steel construction, two deck with cover, on base with 1/3 hp, 225 volt motor, serial# KCN1123 . **...

Girton PM4A Parts Washer. Stainless Steel Parts Washer with Cole Palmer Gear pump Digital wash down, Endress Houser Flow meters, SS Cabinet & Bar...

Dott. Bonapace capsule filler, model IN CAP, stainless steel construction, with capsule orientation station with hopper, liquid filling station w...

Niro Fielder NICA spheronizer, model S-450, stainless steel construction, 450mm diameter bowl, nominally rated .4-2 kg batch size, approximately ...

Swiftpack lane counter, model SPC12P, stainless steel product contact surfaces, 12 lane, 2 step, with feed hopper, on board control panel, 240 vo...

Buchi lab spray dryer, glass chamber, cyclone and dust collector, with nozzle spray atomizer and blower, 220 volt, 50 hertz, serial# 770956. *...

LabelStar pressure sensitive labeler, model LS130DX, 6" max web, with Norwood 53XL40 hot stamp encoder, Allen-Bradley PLC with touchscreen HMI, s...

Lantech single sided case sealer, model CS-1000, 25 5/8" long x 20 1/8" wide x 19 5/8" high maximum case size, capable of up to 30 cases per minu...

Heat shrink wrap tunnel, 60" long x 6" wide heated area, manual height adjustment, with controls, 1 hp 220/380 volt blower. **AUCTIONEERS NOTE*...

Used New Jersey print and apply labeler, model 251VL, with smart date coder, with controls on adjustable height base, 115 volts, serial# 251VL-15...

0.75 cu ft blender, stainless steel construction, approximately 19" x 17" x 4" straight side x 12" cone bottom, " diameter feed with cover, with ...

Mimi bundler wrapper, model UNIBLOCK, type 510/FF, 500 mm max seal width, 280 mm max product height, 480 mm max product width, with tangential in...

Superior Machine Systems pressure sensitive wrap-around labeler, model Genesis 9500, has a 10" wide X 76" long conveyor, 120 volt, serial# 911952...

IMA top loading case packer, model CPV20, with Mettler Toledo case checkweigher, Domino print and apply case labeler, 480 volt, serial# 6903, bui...

Ross Dual Stage Inline Homogenizer, Model ME400DLS, sanitary stainless steel construction, rotor/stator design with jacketed housing, 3/4" inlet,...

IKA Dispax Reactor, stainless steel construction, with 10 hp motor, base, reactor chamber, with controls on base. Parts or rebuild machine.

Isolation Technologies glove box, model ISO System 1.5-1, stainless steel construction, approximately 54" long x 20" deep x 30" high chamber, sin...

Fryma Coball mill, model MS-18, 1.4034 stainless steel contact surfaces, 1.1 liter product zone, rated 2.5 bar at 110 c internal, jacketed for 2 ...

Filamatic Cubitainer bag in a box liquid filling system, rated up to 10 containers/minute, stainless steel product contact surfaces, with twin he...

LB Bohle VMA 70 high shear mixer, model VMA70V M EX, 70 liter jacketed bowl, vacuum design, 7.5 kw main drive, 1.1/1.8 kw chopper drive, vacuum m...

Used Revco/Lindberg incubator, model RCO3000TABA, 28" high x 19" wide x 18" deep chamber, 120 volts, serial# N05H363994-NH

Palmatic gantry vacuum lift assist unit, model PalPharma Vac, stainless steel frame, 120 kg lift capacity with vacuum head and vacuum pump, seria...

Steris Finn Aqua sterilizer autoclave, model 9912-B-GMP, stainless steel contact surfaces, 950 mm wide x 950 mm high x 1250 mm deep approximate ...

Nelmor granulator, model F211, 8" wide feed opening, screw feed, 2 knife rotor, 5 hp, 230/460 volt motor, 1 hp blower discharge with controls, s...

Metolift colum lifter/blender, model CBS-200-S, stainless steel construction, 154" max. lift height, 156" max. discharge height with (6) 200 lit...

Loading...Loading...
  • Lots per page
  • 60
  • 120
  • 240
Page of 3