Refine your search
Filtered by:
- Category
- List
- Grid
-
33 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any enquiries.
WELDING POWER SUPPLY, MILLER MDL. DIMENSION NT450, 450 amps @ 38 v., 100% duty cycle, S/N MC480087V
WELDING POWER SUPPLY, MILLER MDL. DIMENSION NT450, 450 amps @ 38 v., 100% duty cycle, S/N MC480087V
{ Choice of lots: 52 } } } } WELDING TURNTABLE, IMCAR MDL. R18, new 2011, 59” dia. rotating table, 4” center hole, heavy fabricated steel base, S...
WELDING TURNTABLE, IMCAR MDL. R18, new 2011, 59” dia. rotating table, 4” center hole, heavy fabricated steel base, S/N B4277
WELDING TURNTABLE, WELDWIRE 20,000 LB. CAP. MDL. WFT20, 60” dia. table w/control pendant, S/N
{ Choice of lots: 54 } } } } WELDING TURNTABLE, WELDWIRE 20,000 LB. CAP. MDL. WFT20, 60” dia. table w/control pendant, S/N 1086459
{ Choice of lots: 54A, 54B } } } } WELDING POSITIONER, WELDWIRE 1,500 LB. CAP., 3-jaw chuck, S/N 10821
{ Choice of lots: 54A, 54B } } } } WELDING POSITIONER, WELDWIRE 1,500 LB. CAP., 3-jaw chuck, S/N 10822
WELDING POSITIONER, PROFAX MDL. WP1000, 1,000 lb. cap. vert., 1,750 lb. cap. horiz., 24-1/2” dia.
{ Choice of lots: 54C, 55, 56 } } } } WELDING POSITIONER, PROFAX MDL. WP1000, 1,000 lb. cap. vert., 1,750 lb. cap. horiz., 24-1/2” dia. table, ti...
WELDING POSITIONER, PROFAX MDL. WP1000, 1,000 lb. cap. vert., 1,750 lb. cap. horiz., 24-1/2” dia.
{ Choice of lots: 54C, 55, 56 } } } } WELDING POSITIONER, PROFAX MDL. WP1000, 1,000 lb. cap. vert., 1,750 lb. cap. horiz., 24-1/2” dia. table, ti...
WELDING POSITIONER, PROFAX MDL. WP1000, 1,000 lb. cap. vert., 1,750 lb. cap. horiz., 24-1/2” dia.
{ Choice of lots: 54C, 55, 56 } } } } WELDING POSITIONER, PROFAX MDL. WP1000, 1,000 lb. cap. vert., 1,750 lb. cap. horiz., 24-1/2” dia. table, ti...
WELDING POSITIONER, PROFAX MDL. WP1000, 1,000 lb. cap. vert., 1,750 lb. cap. horiz., 24-1/2” dia.
{ Choice of lots: 57, 57A } } } } WELDING POSITIONER, PROFAX MDL. WP1000, 1,000 lb. cap. vert., 1,750 lb. cap. horiz., 24-1/2” dia. table, tilt a...
WELDING POSITIONER, PROFAX, 1,000 lb. cap. vert., 1,750 lb. cap. horiz., 24-1/2” dia. table, tilt
{ Choice of lots: 57, 57A } } } } WELDING POSITIONER, PROFAX, 1,000 lb. cap. vert., 1,750 lb. cap. horiz., 24-1/2” dia. table, tilt angle from 0 ...
WELDING POSITIONER, WELDWIRE 500 LB. CAP., 3-jaw chuck
LINEAR SEAM WELDER, WELDLOGIC, 10’ nominal cap., 11’ horn length, currently arranged for approx. 48”
LINEAR SEAM WELDER, WELDLOGIC, 10’ nominal cap., 11’ horn length, currently arranged for approx. 48” max. dia. parts, 15-3/4” riser block, Weldlog...
COIL UPENDER, CALDWELL 30 T. CAP. MDL. 88-30-72, 72" max. coil width, 72" max. coil dia., V-block
{ Choice of lots: 76 } } } } COIL UPENDER, CALDWELL 30 T. CAP. MDL. 88-30-72, 72" max. coil width, 72" max. coil dia., V-block option
COIL UPENDER, CALDWELL 30 T. CAP. MDL. 88-30-72, 72" max. coil width, 72" max. coil dia., V-block
COIL UPENDER, CALDWELL 30 T. CAP. MDL. 88-30-72, 72" max. coil width, 72" max. coil dia., V-block option (out of service)
{ Choice of lots: 84A, 84C, 84D, 84E, 84F, 84H } } } } POWER TURNING ROLL SET, CUSTOM APPROX. 15 T. CAP., pneu. pwr. drive for use in painting ap...
{ Group of lots: 84B, 84G (P) } } } } POWER TURNING ROLL SET, CUSTOM APPROX. 15 T. CAP., pneu. pwr. drive for use in painting applications, skid ...
{ Choice of lots: 84A, 84C, 84D, 84E, 84F, 84H } } } } POWER TURNING ROLL SET, CUSTOM APPROX. 15 T. CAP., pneu. pwr. drive for use in painting ap...
{ Choice of lots: 84A, 84C, 84D, 84E, 84F, 84H } } } } POWER TURNING ROLL SET, CUSTOM APPROX. 15 T. CAP., pneu. pwr. drive for use in painting ap...
{ Choice of lots: 84A, 84C, 84D, 84E, 84F, 84H } } } } POWER TURNING ROLL SET, CUSTOM APPROX. 15 T. CAP., pneu. pwr. drive for use in painting ap...
{ Choice of lots: 84A, 84C, 84D, 84E, 84F, 84H } } } } POWER TURNING ROLL SET, CUSTOM APPROX. 15 T. CAP., pneu. pwr. drive for use in painting ap...
{ Group of lots: 84B, 84G (P) } } } } POWER TURNING ROLL SET, CUSTOM APPROX. 15 T. CAP., pneu. pwr. drive for use in painting applications, skid ...
{ Choice of lots: 84A, 84C, 84D, 84E, 84F, 84H } } } } POWER TURNING ROLL SET, CUSTOM APPROX. 15 T. CAP., pneu. pwr. drive for use in painting ap...
LOT OF IDLER TANK TURNING ROLLS
LOT OF IDLER TANK TURNING ROLLS
FIXTURE RING, 15' (for Imcar Girth Seam Welding System)
SOLVENT STILL, ECOPURE MDL. SR60, new 2014, 240 v., sgl. phase, 60 liter boiler cap., 22 liter
SOLVENT STILL, ECOPURE MDL. SR60, new 2014, 240 v., sgl. phase, 60 liter boiler cap., 22 liter thermic oil cap., S/N TI91X20204
COIL MANDREL
{ Option of lots: 102, 103, 104, 104A, 104B, 104C } } COIL MANDREL
COIL MANDREL
{ Option of lots: 102, 103, 104, 104A, 104B, 104C } } COIL MANDREL
COIL MANDREL
{ Option of lots: 102, 103, 104, 104A, 104B, 104C } } COIL MANDREL
COIL MANDREL
{ Option of lots: 102, 103, 104, 104A, 104B, 104C } } COIL MANDREL
COIL MANDREL
{ Option of lots: 102, 103, 104, 104A, 104B, 104C } } COIL MANDREL
COIL MANDREL
{ Option of lots: 102, 103, 104, 104A, 104B, 104C } } COIL MANDREL
-
33 item(s)/page