Lot

84

5" X 10" MAGNETIC SURFACE PLATE

In Precision Cutting & Threading Tool Manufacturer

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 905-669-8893 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
5" X 10" MAGNETIC SURFACE PLATE
Auctioneer has chosen not to publish the price of this lot
Cambridge, Ontario
13.00%
18.00%
5" X 10" MAGNETIC SURFACE PLATE
5" X 10" MAGNETIC SURFACE PLATE

Precision Cutting & Threading Tool Manufacturer

Ends from
Venue Address
1297 Industrial Road
Cambridge
Ontario
N3H 4W3
Canada

EXCLUSIVE RIGGING APPLIES TO THIS AUCTION, SEE INFORMATION BELOW:

FEN Industrial
245 King George Rd. #212
Brantford, Ontario
Canada N3R 7N7
Attn: Steve Gallagher
Office: 1-800-347-0471
Mobile: 1-905-807-2337
steve@fenindustrial.com

Rigging to Include: Electrical disconnect, dismantle and prep where applicable and loading onto provided flatbed trucks (Rigger can also quote transportation if requested). All prices are plus fees and taxes.  Contact rigger for pricing on loading into containers, dry vans,  palletizing lots, crating, wrapping, blocking, etc.

Important Information

Auction Date & Time: lots start closing on Tues. 04/11/2024 11:00 am

Location: 1297 Industrial Road, Cambridge, ON, N3H 4W3

Inspection: Wednesday April 10th, 9AM - 4PM or By Appointment

18% Buyers Premium applies on all online purchases. 

 

Featuring:

CNC Vertical Machining Centers

2019 HAAS VF-3 CNC Vertical Machining Center, CNC Control, CAT40, 8,100 RPM Spindle, Approx. 2,686 Feed Cutting Time Hours, Chip Auger, Chip Strainer, Umbrella ATC, Rigid Tapping, Ethernet, HAAS Connect, Wifi, s/n 1165379, HAAS 4th Axis Rotary Table

2005 HAAS VF-2B CNC Vertical Machining Center, CNC Control, CAT40, (20) Umbrella ATC, 20HP 2-Speed Gear Drive, 1,000 IPM Feed Rate, 14” x 40” Table, Lights, Chip Auger, Flood Coolant, HAAS 4th Axis Rotary, s/n 41576

 

CNC Turning Centers

HARDINGE Conquest ST25 Gang Tool CNC Turning Center, GE Fanuc O-T CNC Control, s/n ST-172-25, Spego Turnamic Bar Feed System, Approx. 15’L

HARDINGE Cobra 65 CNC Turning Center, Model LC65, 12-Station Turret, Tailstock, 8” Chuck, GE Fanuc 21-T CNC Control, s/n C65-170, HARDINGE Har-Matic Hydrodynamic Retractable Bar Feed System, Approx. 15’L w/ Spare Push Bars

HARDINGE Conquest T42 CNC Turning Center, Model SG-42, GE Fanuc Series 18-T CNC Control, Collet Chuck, Tailstock, 12-Station Turret, Parts Catcher, s/n SGA-1712-B, Spego Bar Feed System, Approx. 15’L

 

Lathes

DEAN SMITH GRACE Lathe, 13” x 30”, 12” 4-Jaw Chuck, 1.5” Bore, Tailstock, Tool Post, s/n 34503

HARDINGE DSM 59R Lathe

HARDINGE Toolroom Lathe

MODERN Lathe, 18” x 60”, 7” Chuck, 1.5” Bore, Tailstock, Tool Post, Moden Tracermatic Attachment

WARNEY SWASEY M-1200 Turret Lathe, 8” 3-Jaw Chuck, 6-Station Turret, Tool Post, Push Bar, s/n 494074

 

Milling Machines

TOS FNK 25A Vertical Milling Machine, 12” x 49” Table, Speeds to 4,500 RPM

WYSSBROD Horizontal Milling Machine

HMT FN2EH Horizontal Milling Machine, 40 Taper, 8” x 48” Table, s/n 1777

 

Grinders

STUDER S32 CNC Cylindrical Grinder, Fanuc 160i-T CNC Control, X-300mm Axis, Z-485mm Axis, 500mm Max Grinding Diameter, 400mm Grinding Length, 203mm Bore, 350mm Max Swing, 80kg Max Workpiece Weight, 30 Degree Head Rotation, Marposs P5 Process Controller, Rotary Disc Dresser, Filter and Coolant System

CINCINNATI MILACRON 220-8 C Centreless Grinder, Hoffman DT-20 Filter and Coolant System, .030” – 4.75” Workpiece Diameter, 6,500 ft/min Grinding Wheel Speed, Max Travel Lower Slide 6.375”, Max Travel Upper Slide 2.875”, Max Swivel to Front 1 Degree, Max Swivel to Rear 2 Degree

CINCINNATI MILACRON ML CNC Centreless Grinder, 4”W Wheel

BLANCHARD Rotary Surface Grinder, 30” Dia. Table

JONES & SHIPMAN 1300X Cylindrical Grinder, 48” Bed, Digital Controls, Speeds to 450 RPM

BROWN & SHARPE No. 10 Cylindrical Grinder, 22” Bed, Speeds to 319 RPM

BROWN & SHARPE No. 3 Cylindrical Grinder, 68” Bed

FINNY Newall Cylindrical Grinder, Mitutoyo 2-Axis DRO, 28” Bed

JONES & SHIPMAN Surface Grinder, 8” x 24” Magnetic Chuck

(3) CINCINNATI No. 2 Tool Grinders, 39” Bed, Adjustable Column, s/n’s 05411-20, CK6402-3, 1D211K-1029

CINCINNATI Bertram No. 2 Dual-Sided Tool Grinder, 36” Bed, Adjustable Column, s/n 1X740

CINCINNATI Tool Grinder, 36” Bed, Adjustable Column, s/n 252125H111

CINCINNATI Monoset Tool Post Grinder, s/n PD1C55EV104

OERLIKON FS21 Grinder, 16” Bed, s/n 297170

FINNY Tap Sharpener, 16” Bed

HERTLEIN Semi-Automatic Chamfer Machine, Multi Drive Speed Control

HERTLEIN TC 200 Chamfer Machine, s/n TC7013

HERTLEIN GP-125-8 Chamfer Machine, s/n GP-7210

HERTLEIN SF-410-2 Fluting Machine, s/n S7925

HERTLEIN SQ 100 Fluting Machine, s/n SQ6714

HERTLEIN SF 410-2 Fluting Machine, Digital Control, S9711

FIRTH BROWN Grinder

FORD SMITH Dual Pedestal Grinder

FORD SMITH Dual Grinder

 

Saws

DOALL C-8A Horizontal Bandsaw, Approx. 8” x 12” Cap., Clamping, Outfeed Roller Conveyor, s/n 224-65110

WELLS Horizontal Bandsaw w/ Outfeed Roller Conveyor

 

Forklift

TOYOTA 42-7FG25 Propane Forklift, 4,700lb Cap., 185” Max Lift, 3-Stage Mast, Side Shift, Outdoor Tires, s/n 12724

 

Compressors

2012 KAESER AS 20 Rotary Screw Air Compressor, 20HP, s/n 1003

KAESER AS 36 Rotary Screw Air Compressor, 36HP

KAESER KRD 150 Air Dryer

 

Plant Support Equipment

2009 LOSMA DTE-DCO 150/400 Gravity Bed Coolant Filters, Approx. 3’ x 14’

MICRO PRODUCTS RW-3 Precision Spot Welder, 20 KVA, s/n 32716

SMOG-HOG Oil Filtration and Recovery Units

BL FURNACES ESB301830 Electric Furnace, 1,000F Max Temp, s/n 65530

Dip & Quench Wash Tanks

SIC baSIC 150 Engraver

MONODE AM10A Marking Machine

TAYLOR HOBSON Etching Machine

JONES & LAMSON Special FC-14 Optical Comparator, 14” Dia. Screen

JONES & LAMSON PC-14A Optical Comparator, 14” Screen, s/n E37200

JONES & LAMSON Optical Comparator, 14” Dia. Screen

FUNDITOR C-Frame Press, 12” x 9” Bed

TAYLOR HOBSON Microscope

=================================================================

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here. 

Customer Support Hours:

  • Monday – Friday, 8:00 AM EST – 8:00 PM EST

Email: support@bidspotter.com

Office: (253) 858-6777      Toll Free: (866) 597-2437

Frequently Asked Questions

 

Terms & Conditions

PAYMENT:    All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).

Payment is due by:  2PM Friday April 12th, 2024.

Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00 

Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.


Removal deadline:   2PM THURSDAY APRIL 25TH, 2024.

 

EXCLUSIVE RIGGING APPLIES TO THIS AUCTION, SEE INFORMATION BELOW:

FEN Industrial
245 King George Rd. #212
Brantford, Ontario
Canada N3R 7N7
Attn: Steve Gallagher
Office: 1-800-347-0471
Mobile: 1-905-807-2337
steve@fenindustrial.com

Rigging to Include: Electrical disconnect, dismantle and prep where applicable and loading onto provided flatbed trucks (Rigger can also quote transportation if requested). All prices are plus fees and taxes.  Contact rigger for pricing on loading into containers, dry vans,  palletizing lots, crating, wrapping, blocking, etc.

 

Accounting: Victoria 905-669-8893 Ext. 207, vwhitman@infinityassets.com

Banking Information (Wire Transfers):

CANADIAN WIRE TRANSFER INSTRUCTIONS

Beneficiary Bank: ROYAL BANK OF CANADA
3300 HIGHWAY #7
CONCORD, ONTARIO

Beneficiary Customer:
INFINITY ASSET SOLUTIONS INC.
ACCOUNT #: 1007137

TRANSIT #: 00192
BANK #: 003
SWIFT # ROYCCAT2

FOR CUSTOMERS FROM USA:

INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ABA#: 021000021
IBAN #: 003401028600192

 

Terms and Conditions of Sale Persons participating in the auction shall be bound by ALL of the following terms and conditions, which are subject to amendments and modifications by the Auctioneer at the time of auction. 1. This catalogue is meant merely as a guide. The Auctioneer believes the descriptions contained herein to be correct, but make no warranty in connection therewith. 2. Auctioneer reserves the right to sell subject to reserve and to bid for its own account and for the accounts of others, whether by verbal or written proxy, all lots are subject to prior sale. 3. The Auctioneer reserves the right to refuse any applicant the privilege of bidding or attending at the auction and may revoke such privilege at any time. 4. All Articles will be sold to the highest bidder conforming to the bid process, provided that the Auctioneer reserves the right to sell articles by individual, group lots and “in bulk,” as he deems appropriate. The Auctioneer reserves the right to sell on behalf of third parties, its own account or on the account of others. Should any dispute arise between two or more bidders or as to any bid, the lot in question may, at the Auctioneers discretion, be immediately put up again and resold. The Auctioneer shall regulate all matters relating to the conduct of the auction and his decision shall be final and binding on all bidders. The record kept by the clerk of sale, shall in all cases be accepted by the bidder as final. 5. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke his bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 6. ALL SALES ARE FINAL, ON AN “AS IS WHERE IS,” “IN PLACE” “WITH ALL FAULTS” BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED OR IMPLIED, STATUTORYOR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS, AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, OR OTHERWISE. DESCRIPTIONS HAVE BEEN PREPARED FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RULED UPON BY THE PURCHASER FOR ACCURACY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. 7. A deposit of equal to 25 percent of the purchases shall be made at the time of sale. The balance of the purchase price must be paid in full before or immediately after the conclusion of the auction. All payments must be in Cash, Certified Funds, Visa, MasterCard or Interac, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc. Deposits on account of purchases may be made in advance of the auction and the balance thereof will be refunded immediately after the auction. The Auctioneer reserves the right to put articles back up for auction if deposit is not received at or before the time of sale. 8. No article shall be removed unless paid for in full and articles purchased shall be removed within the guidelines and terms stipulated. The Purchaser shall be responsible for all the costs of removal and shall be liable for all damages, including without limitation, any environmental damage, caused during or as a result of the removal. Purchasers shall comply with all environmental laws and regulations including requirements as to bonding of movers. No claims shall be allowed after removal of the purchased article. 9. Where available, documents of transfer, including motor vehicle ownership documents, which are in possession of the Auctioneer, will be provided to the Purchaser following the auction or as soon thereafter as such documents are available. 10. No purchaser may assign, transfer or dispose of his rights in any article purchased before he has paid the purchase price in full. 11. Purchasers shall pay applicable federal and provincial taxes, or furnish exemption certificates at the time of payment for goods purchased. All purchases are subject to Federal Harmonized Sales Tax (H.S.T.) at all times (including buyer's premium). No exceptions whatsoever. 12. Time shall be of the essence. If a Purchaser fails to make payment of remove goods within the time periods hereinabove provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Auctioneer in his discretion deems advisable, and the Purchaser shall be liable for the shortfall and all costs expenses, including but not limited to interest rates (a minimum of 1.5% per month or 18% per annum), legal fees, moving and storage (a minimum rate of $2.00/sq.ft. per month) and commissions, incurred such as resale. 13. The Auctioneer assumes no responsibility or any liability once title passes, which occurs at time of payment in full. Purchasers are advised to prearrange for insurance coverage of their purchase. Title will revert to the seller in the event purchaser does not remove his purchases by the time specified. 14. If the Auctioneer is unable to deliver an article sold to a Purchaser due to fire, theft or any other reason whatsoever, the Auctioneer shall reimburse the Purchaser for all monies paid to the Auctioneer in respect of the article and the Auctioneer shall have no further liability to the Purchaser arising from or relating to such loss, including without limitation, any damages or loss of profits. 15. Bidders acknowledge that any auction site is a potentially dangerous place with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at their own risk with notice of the condition of the premises, the activities on the premises and the conduct of third parties, and the Bidder shall so advise his/her agents and employees. No person shall have any claim against the auctioneer, his agents, employees or principals for any injuries sustained for damages to or loss of property which may occur from any cause whatsoever.

 

EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS 

The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale: 

  1. All invoices must be paid in full prior to removal of equipment/ Each invoice must be marked “Paid in Full” and initialed by an authorized Infinity representative.
  2. All buyers are solely responsible for coordinating the removal of items purchased at the Auction and all associated costs.
  3. Buyers are responsible for, at their expense: a. Proper and safe disconnection and termination of all electrical, gas, water and/or air lines to machines conforming to all governing building codes; b. Shearing flush to the floor of all anchor bolts or fasteners; c. Erecting safety barriers around pits and holes in the floor created by removal of equipment until repaired; d. Repair all holes in the floor, walls or roof created by the removal of items purchased conforming to all governing building codes; e. Removing, off premises, machine oils and all hazardous materials (including all contaminants) contained in items purchased; f. Repairing all damage cased to the premises by a buyer, its representative or any other party hired by a buyer for the removal of items purchased; g. Leaving the work area in a clean, broom-swept condition conforming to all governing building codes; h. Any other specific terms and conditions communicated by Infinity before, during or after the auction sale; i. Removal of items purchased by the time and date set by Infinity before, during or after the auction sale; and j. The safety of all of a buyer’s employees, agents or representatives including all movers/riggers hired by such buyer.
  4. Prior to removal, all buyers, or any movers or riggers hired by a buyer, must provide to Infinity a satisfactory certificate of insurance evidencing at leas $5,000,000 in comprehensive liability insurance coverage (including workers compensation and automobile) per person, per occurrence.
  5. Prior to removal, an authorized Infinity representative must examine and approve the removal of all items purchased at the sale. Such approval shall be indicated by this representative initialing all invoices.
  6. No items shall be removed until after the auction sale. Removal hours are weekdays only between 8:00 a.m. and 4:00 p.m. unless otherwise specified.
  7. Buyers and their movers/riggers are jointly and severally liable for all damages, costs and expenses to the premises or any other assets which were cased by any of them, their employees, agents or representatives whether through negligence or otherwise. The Buyer indemnifies and saves Infinity harmless from any and all costs, expenses and claims suffered or incurred by Infinity as a result of any act or omission of such buyer and/or any mover or rigger retained by a buyer. 

NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION. 

NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.

 

See Full Terms And Conditions

Tags: Surface Plate