Auction Date & Time: lots start closing on Thursday, January 26th at 9:00 am CT
Location: 1535 Thomas St, Memphis, TN 38107, United States
Inspection:Wednesday January 25th, 9AM - 4PM or By Appointment
18% Buyers Premium applies on all online purchases.
BELOIT Paper Machine
Paper Machine Web Vision Camera System
Paper Machine Kadant Oscillating System
MTE 10-Ton Cap. Crane Including Approx. 24’ Bridge and (2) 10-Ton Cap. Hoists / Cranes, Pendant Control
THOUSANDS OF FEET Copper Wire & Stainless Steel Piping
GE, CUTLER HAMMER MCC’s & Electrical Switchboxes
(3) NASH Vacuum Pumps
(15+) GOULDS Pumps
(200+) Motors up to 1,250HP
(25+) FISHER & METSO Valves
BRODERSON IC-2002B Industrial Self-Propelled Carry Deck Crane, 15-Ton Cap. (30,000lbs), 60’ Max Extension Boom, Approx. 4,571hrs, Diesel
GENIE Z-30/20NRJ Telescoping Boom Lift, 20’ Boom Extension, 30’ Max Lift, New $6,000 Battery Just Installed
GENIE GS-1930 Electric Scissor Lift, 19’ Max Lift, 500lb Cap. / 250lb Extended Cap, New $600 Battery Just Installed, Approx. 35.3hrs
CASCADES METALLOMAX 40,000lb Cap. Hydraulic Roll Cart / Lift Cart, Diesel Powered Kobota Engine
4-Level I-Beam Roll Holder Stand w/ (2) Chain Hoists / Trollies, 10-Ton Cap., Approx. 18’H x 21’D x 23’W
(23) Assorted VOITH, ALBANY INTERNATIONAL, ASTEN JOHNSON Paper Machine Rolls
Core Cutting Saw
SELCO 5’W Hydraulic Baler
MJ MALLIS WULFTEC Automatic Pallet Wrapper
CLEAVER BROOKS CB Packaged Boiler Model CB 700-700
ATLAS COPCO GA90 Air Compressor
HANKISON 4700-24-81-G Air Dryer
HYD-MECH S-20 Series II Horizontal Bandsaw w/ Clamping, s/n 60209082
SUPERMAX Vertical Milling Machine, 1-1/2HP, 60 to 4,200 RPM, Power Table, 9 x 48” Table
DAKE 50-Ton Cap. Hydraulic Shop Press
POWER TEAM Hydraulic Shop Press
Transformers, Stainless Tanks, Flow Meters, Drives, Screens, Platform Scales, Fans, Blowers, Grinders, Toolboxes, Power & Hand Tools, Mag Drills, Broach Sets, Machine Dollies, Welders, Plasma Cutters, Welding Tables & Supplies and Much More!
2015 FUTURA F80.A4 4-Color Printer, Drive Side: (As Per Web Flow) Left, Web Width Max 110" (2590.8mm), Cliché Roll Diameter: Base Mandrel Diam. 12.15" (308.61mm), Total Finished Diameter (Base Mandrel & Sleeve): 12.738" (323.54mm), Equip Idle Since Mid-2020, New Cost $4.3M+ USD, Unwind Stand F70, Max Speed: 1000m/3280ft/M, Max Diameter: 3000mm/118", Max Weight: 5000kg/11000lbs, Core Plugs: Qty 4x Diam: 297mm/11.687", Slitting Unit, Cm-150a Manual Shear Type, Slitter Head: 14x, Min Slitting Width: 150mm, Slitter Blade Diam: 180mm, Counter Blade Diam: 250mm, Rewinder, Valmet Focus Reelite 20-ENS, Face Width: 2900mm/114", Core Shaft Size: 3"/12", Grades Tissue: 12 To 40 G/Sq.M, Max Diameter: 2500mm/98.5", Max Width: 2700mm/106.3", Design Speed: 1300 Mt/Min Max Running 1100 Mt/M, Safety, Fast Stop: 30 Mt/Min/Sec, Emergency Stop: 100 Mt/Min/Sec, Spool Handler, Overhead Crane, Core Chuck Puller, Cart Plug Handler+ Charger, Ink Totes Rack And Waste Tank, Printer Sleeves (Machine Is Still Installed And Not Currently In Operation, Machine Is Functional, Rigging At Buyer's Expense) (Located In Pryor, OK)
2015 FUTURA F80.A4 4-Color Printer, Drive Side: (As Per Web Flow) Left, Web Width Max 110" (2590.8mm), Cliché Roll Diameter: Base Mandrel Diam. 12.15" (308.61mm), Total Finished Diameter (Base Mandrel & Sleeve): 12.738" (323.54mm), Equip Idle Since Mid-2020, New Cost $4.3M+ USD, Unwind Stand F70, Max Speed: 1000m/3280ft/M, Max Diameter: 3000mm/118", Max Weight: 5000kg/11000lbs, Core Plugs: Qty 4x Diam: 297mm/11.687", Slitting Unit, Cm-150a Manual Shear Type, Slitter Head: 14x, Min Slitting Width: 150mm, Slitter Blade Diam: 180mm, Counter Blade Diam: 250mm, Rewinder, Valmet Focus Reelite 20-ENS, Face Width: 2900mm/114", Core Shaft Size: 3"/12", Grades Tissue: 12 To 40 G/Sq.M, Max Diameter: 2500mm/98.5", Max Width: 2700mm/106.3", Design Speed: 1300 Mt/Min Max Running 1100 Mt/M, Safety, Fast Stop: 30 Mt/Min/Sec, Emergency Stop: 100 Mt/Min/Sec, Spool Handler, No Overhead Crane Included With This Machine, Core Chuck Puller, Cart Plug Handler+ Charger, Ink Totes Rack And Waste Tank, Printer Sleeves (Machine Is Still Installed And Not Currently In Operation, Machine Is Not Functional, Parts Are Missing And Were Used To Support Twin Machine Located In Pryor, Ok, Rigging At Buyer's Expense) (Located In Barnwell, SC)
HAYSSEN Wrapper ULTRA FLOW UPS, Model UF/EPS 160 460 V 60 Hz 3 Ph 60 Amp, 1990, s/n 082259 c/w All Available Spare Parts on Site, Currently Set Up For Bath But Can Do Towel, Many Funnels Configurations For Many Different Pack Sizes (Machine Is Still Installed, Rigging At Buyer's Expense) (Located In Pryor, Ok)
HAYSSEN Wrapper ULTRA FLOW UPS, Model UF/EPS 460 V 60 Hz 3 Ph 60 Amp, 1991, s/n 082261 c/w All Available Spare Parts on Site, Currently Set Up For Bath But Can Do Towel, Many Funnels Configurations For Many Different Pack Sizes (Machine Is Still Installed, Rigging At Buyer's Expense) (Located In Pryor, OK)
2010 FUTURA Dual Color Printer, Machine Type F80.C2, s/n F00086/00424, 460Amp, 60hz, HMI Unit and Various Parts, Electrical Wires, Bolts and Bearings, Condition: Refurbished And Never Installed, (P3) (Disconnected And Ready To Be Shipped, Loading Cost At Buyer's Expense) (Located In Wagram, NC)
BRETTING Single Folder Towel Tissue Converting Equipment Including: 1992 BRETTING Winder, s/n 4578-92, Product Made: Single-Fold Towel, # Of Chutes / Lane: 8/9 Wide, # Napkins/Min: 1,000, Max Width: 82", Usual Width: 82", Max Speed 425, Gears, Perf. Roll, Perf Length / Cut Off - Mechanical: 10,25 Fix, 1992 BRETTING Embosser, Model Dual Emboss (2x), s/n 4579-92, Type: Steel-To-Steel, Style: Matched, Max Width: 83", Emboss Pattern #1: Perf Emboss, BRETTING Backstands, Max Parent Roll Width: 83", Max Parent Roll Diameter: 72", Shaftless, c/w (8) Core Chucks, 1992 BRETTING Log Saw, s/n 4582-92, Saw Cut Length / Slitter Position Width: 8 - 9,25 (Can Be Change Easily - Servo Drive), Max Cuts/Min: 25, Max Width Of Logs: 82", Grinding: Rotary, (1) Blade, (2) Infeed Lanes, (2) Outfeed Lanes, 1992 BRETTING Automatic Wrapper, s/n 4581-92, (1) Infeed Lane, Wrapping Material: Paper, Type Of Packs: 250 SH Variable Servo, Nordson Hot Melt Pro Blue Gluer, Dual 3-Ton Crane For Loading Unwind Stands, Dedicated Nash Vacuum Pumps, (10,250 X 9,125) Product Size, Folder Length Can't Be Changed Without Any Major Conversion, Folder Cutoff Is 10.250", Main Sheet Size Being Run Is 10.250 X 9.125, 9,125 Can Be Changed Easily Within The Saw (Machine Is Still Installed, Rigging At Buyer's Expense) (Machine Was Idled In 2020 Due To Mill Closure, Stored Installed Condition In Heated Warehouse, Excellent Running Condition, Major Investment Done Before Closing) (Sale Restriction Outside North America Sale Subject To CTG Approbation) (A Loading Fee Of $3,000 Will Apply) (Located In Waterford, NY)
NISKAE Wastewater Treatment for Treating / Separating Ink from Water, Installed In 2021, Previously Installed in A Tissue Converting Facility, Brand New, Never Used, www.niskae.com For More Details Coming from The OEM Spare Parts and Consumable Included (Cost Brand New 75k, Julien Quiblier North American 1-438-392-0218) (Machine Has Been Disconnected and Ready to Be Shipped, Loading is at Buyer's Expense, A $1,000 Loading Fee Will Apply) (Located In Kingsey Falls, QC)
Facial Automatic Handkerchief Line, Facial Pocket Line, Capacity: 70 Pack/Min, Paper Length: 8.6" X 8.25" Number Of Sheets: 15 Per Pack, Brand: Septembar Type :660-750, s/n 096/2010, Year: 2010, Purchased New By Cascades, Electrical: P=9.6w, U=3x400v, Max Load I = 3x63a, Ip 55, Weight 7500kg, Technical Information Available, Spare Parts And Consumable Included (Cost Brand New 450k) (Machine Has Been Disconnected And Ready To Be Shipped, Machine Is In Running Condition, A $1,000 Loading Fee Will Apply) (Located In Kingsey Falls, QC)
LAVAL 98 Napkin Tissue Converting Equipment Including: 1997 BRETTING 17"-12" Cutoff 6 Web Dinner Napkin Folder, s/m 5448-97F, Product Made: Dinner / Dispenser Napkins, # Of Chutes: 6, # Of Napkins/Min: 3600, Max Width: 96", Usual Width: 72", Max Speed: 580 Ft/Min, Gears, Sheet Count (Capability): 150-350, Electronic Platform: AB PLC5, Per. Roll, Perf Length - Mechanical 11.625", 1997 BRETTING Two Color Stack Flexo Printer, s/n 5448-97p, Flexographic, Gear, 1997 BRETTING Three Station Embossing Unit, s/n 5448-97E, Type: Napkins, Style: Random/Border, Max Width: 34", Emboss Pattern #1: Linen / Open Face / Diamond (All Cascades Emboss Logo And Pattern Will Be Excluded Or Destroyed Prior To Shipment At Cascades Cost), 1997 BRETTING Self Loading Hydraulic Unwind Stand, s/n 5448-97S, (1) Unwind, Max Parent Roll Width: 96", Uses Also 26-30-72" Trim w/ Another Back Stands Set In Parallel, Max Parent Roll Diameter: 65", Shaftless, 3, 8, 12" Core Plugs, Electric (Machine Has Been Removed From Excellent Running Condition In 2021 And Is Ready To Be Shipped) (Excludes Bretting Wrapping / Wrapper Section) (Sale Restriction Outside North America Sale Subject To CTG Approbation) (A Loading Fee Of $3,000 Will Apply) (Located In Kingsey Falls, QC)
LANGEN PACKING GROUP Mistral Cartoner, Fully Automatic, Speed: Standard Carton Max 150 CPM, Cube Carton Max 120 CPM, Order: C09-0500, Year: 2009, Type: Mistral, Id Nr: M0448 (New Cost Of 400k In 2010, Brand New 2021 Price 600-650k) (Note: No Electrical Cabinet / Drives And Plc** OEM Can Supply Updated New Program And Components) (Machine Removed In 2018, Ready To Be Shipped, Stored In Heated Warehouse From Excellent Running Condition) (A $1,500 Loading Fee Will Apply) (Located In Kingsey Falls, QC)
2010 Shrink Wrapper Fully Automatic, Brand: Poly Pack, Model CFH 16-24-48VHL(3), 600V, 40Amp, 60hz, 5KW, 3 Phase, S/N 3629, Process Description Product(s): Tissue Boxes Parameters: Products #1 & #2, Configuration #1 (3x1x1), Products #1 & #2, Configuration #2 (3x1x2), Products #1 & #2, Configuration #3, #4 & #5 (4x1x3, 5x1x3 & 6x1x3), Products #3, Configuration #1 (3x1x1) (New Cost Of 350k In 2010) (Removed In 2018 And Ready To Be Shipped, Stored In Heated Warehouse From Excellent Running) (A Loading Fee Of $1,500 Will Apply) (Located In Kingsey Falls, QC)
2010 Free Standing Overhead Crane System, 4-Ton Cap. Total, c/w (2) Runner Of 2x 1-Ton Hoist, Brand: R&M Material Handling Inc., (2) Spreader Bar Swivel, Rail Length: 119', Rail Center to Center: 34'-4.5", Height: 16.5' (Removed In 2019 And Ready To Be Shipped, Stored In Heated Warehouse From Excellent Running) (A Loading Fee Of $1,000 Will Apply) (Located In Kingsey Falls, QC)
NASH CL2001 Vacuum Pump, Test # 14BH6447, Inplet: 6", Outlet: 6", Motor - Ac - Baldor Reliance, 75hp, 1,780 Rpm, Frame: 365t, 460v, Enclosure: TEFC, Insulation Class: F, 3 Ph / 60 Hz / Sf: 1.15, Model ECP84316T-4 (Removed In 2019 And Ready to Be Shipped, Stored in Heated Warehouse from Excellent Running) (A Loading Fee Of $300 Will Apply) (Located In Kingsey Falls, QC)
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
- Monday – Friday, 8:00 AM EST – 8:00 PM EST
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms & Conditions
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).
Payment is due by: 2PM Monday January 30th, 2023.
A 18% buyers premium will be added to all online purchases,
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.
Removal deadline: Small Items by Friday February 24th, 2023. Large Items by Friday March 31st, 2023.
Site Supervisor: Chris Markstahler 901-517-9329 or firstname.lastname@example.org
Accounting: Victoria 905-669-8893 Ext. 207, email@example.com
Banking Information (Wire Transfers):
USD WIRE TRANSFER INSTRUCTIONS:
RBC ROYAL BANK
3300 HIGHWAY #7, WEST
CONCORD, ONTARIO L4K 1A5
INFINITY ASSET SOLUTIONS INC.
63 MAPLECRETE ROAD
CONCORD, ONTARIO L4K 1A5
ACCOUNT #: 4010286
TRANSIT #: 00192
BANK #: 003
SWIFT CODE: ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
IBAN #: 003401028600192
Terms and Conditions of Sale Persons participating in the auction shall be bound by ALL of the following terms and conditions, which are subject to amendments and modifications by the Auctioneer at the time of auction. 1. This catalogue is meant merely as a guide. The Auctioneer believes the descriptions contained herein to be correct, but make no warranty in connection therewith. 2. Auctioneer reserves the right to sell subject to reserve and to bid for its own account and for the accounts of others, whether by verbal or written proxy, all lots are subject to prior sale. 3. The Auctioneer reserves the right to refuse any applicant the privilege of bidding or attending at the auction and may revoke such privilege at any time. 4. All Articles will be sold to the highest bidder conforming to the bid process, provided that the Auctioneer reserves the right to sell articles by individual, group lots and “in bulk,” as he deems appropriate. The Auctioneer reserves the right to sell on behalf of third parties, its own account or on the account of others. Should any dispute arise between two or more bidders or as to any bid, the lot in question may, at the Auctioneers discretion, be immediately put up again and resold. The Auctioneer shall regulate all matters relating to the conduct of the auction and his decision shall be final and binding on all bidders. The record kept by the clerk of sale, shall in all cases be accepted by the bidder as final. 5. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke his bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 6. ALL SALES ARE FINAL, ON AN “AS IS WHERE IS,” “IN PLACE” “WITH ALL FAULTS” BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED OR IMPLIED, STATUTORYOR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS, AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, OR OTHERWISE. DESCRIPTIONS HAVE BEEN PREPARED FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RULED UPON BY THE PURCHASER FOR ACCURACY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. 7. A deposit of equal to 25 percent of the purchases shall be made at the time of sale. The balance of the purchase price must be paid in full before or immediately after the conclusion of the auction. All payments must be in Cash, Certified Funds, Visa, MasterCard or Interac, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc. Deposits on account of purchases may be made in advance of the auction and the balance thereof will be refunded immediately after the auction. The Auctioneer reserves the right to put articles back up for auction if deposit is not received at or before the time of sale. 8. No article shall be removed unless paid for in full and articles purchased shall be removed within the guidelines and terms stipulated. The Purchaser shall be responsible for all the costs of removal and shall be liable for all damages, including without limitation, any environmental damage, caused during or as a result of the removal. Purchasers shall comply with all environmental laws and regulations including requirements as to bonding of movers. No claims shall be allowed after removal of the purchased article. 9. Where available, documents of transfer, including motor vehicle ownership documents, which are in possession of the Auctioneer, will be provided to the Purchaser following the auction or as soon thereafter as such documents are available. 10. No purchaser may assign, transfer or dispose of his rights in any article purchased before he has paid the purchase price in full. 11. Purchasers shall pay applicable federal and provincial taxes, or furnish exemption certificates at the time of payment for goods purchased. All purchases are subject to Federal Harmonized Sales Tax (H.S.T.) at all times (including buyer's premium). No exceptions whatsoever. 12. Time shall be of the essence. If a Purchaser fails to make payment of remove goods within the time periods hereinabove provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Auctioneer in his discretion deems advisable, and the Purchaser shall be liable for the shortfall and all costs expenses, including but not limited to interest rates (a minimum of 1.5% per month or 18% per annum), legal fees, moving and storage (a minimum rate of $2.00/sq.ft. per month) and commissions, incurred such as resale. 13. The Auctioneer assumes no responsibility or any liability once title passes, which occurs at time of payment in full. Purchasers are advised to prearrange for insurance coverage of their purchase. Title will revert to the seller in the event purchaser does not remove his purchases by the time specified. 14. If the Auctioneer is unable to deliver an article sold to a Purchaser due to fire, theft or any other reason whatsoever, the Auctioneer shall reimburse the Purchaser for all monies paid to the Auctioneer in respect of the article and the Auctioneer shall have no further liability to the Purchaser arising from or relating to such loss, including without limitation, any damages or loss of profits. 15. Bidders acknowledge that any auction site is a potentially dangerous place with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at their own risk with notice of the condition of the premises, the activities on the premises and the conduct of third parties, and the Bidder shall so advise his/her agents and employees. No person shall have any claim against the auctioneer, his agents, employees or principals for any injuries sustained for damages to or loss of property which may occur from any cause whatsoever.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
- All invoices must be paid in full prior to removal of equipment/ Each invoice must be marked “Paid in Full” and initialed by an authorized Infinity representative.
- All buyers are solely responsible for coordinating the removal of items purchased at the Auction and all associated costs.
- Buyers are responsible for, at their expense: a. Proper and safe disconnection and termination of all electrical, gas, water and/or air lines to machines conforming to all governing building codes; b. Shearing flush to the floor of all anchor bolts or fasteners; c. Erecting safety barriers around pits and holes in the floor created by removal of equipment until repaired; d. Repair all holes in the floor, walls or roof created by the removal of items purchased conforming to all governing building codes; e. Removing, off premises, machine oils and all hazardous materials (including all contaminants) contained in items purchased; f. Repairing all damage cased to the premises by a buyer, its representative or any other party hired by a buyer for the removal of items purchased; g. Leaving the work area in a clean, broom-swept condition conforming to all governing building codes; h. Any other specific terms and conditions communicated by Infinity before, during or after the auction sale; i. Removal of items purchased by the time and date set by Infinity before, during or after the auction sale; and j. The safety of all of a buyer’s employees, agents or representatives including all movers/riggers hired by such buyer.
- Prior to removal, all buyers, or any movers or riggers hired by a buyer, must provide to Infinity a satisfactory certificate of insurance evidencing at leas $5,000,000 in comprehensive liability insurance coverage (including workers compensation and automobile) per person, per occurrence.
- Prior to removal, an authorized Infinity representative must examine and approve the removal of all items purchased at the sale. Such approval shall be indicated by this representative initialing all invoices.
- No items shall be removed until after the auction sale. Removal hours are weekdays only between 8:00 a.m. and 4:00 p.m. unless otherwise specified.
- Buyers and their movers/riggers are jointly and severally liable for all damages, costs and expenses to the premises or any other assets which were cased by any of them, their employees, agents or representatives whether through negligence or otherwise. The Buyer indemnifies and saves Infinity harmless from any and all costs, expenses and claims suffered or incurred by Infinity as a result of any act or omission of such buyer and/or any mover or rigger retained by a buyer.
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.