Jam-Ko Engineering Company

by Heath Industrial

12 Sep 2019 11:00 ET (16:00 BST) Live Webcast Auction

Important Information

Jam-Ko Engineering Company

Complete Stamping Facility, Toolroom & Material Handling Equipment & More!

Auction Date: Thursday, September 12, 2019 at 11:00 am EDT

Inspection/PreviewWednesday, Sept. 11, 9 AM - 4 PM

Location: 21496 Buckingham Road, Elkhart, IN

Removal/Pickup:

Major Asset List:

Minster 150 Ton Model P2-150-54 Piece-Maker Straight Side Double Crank Press, s/n 18440, 40”x54” Bed, 6” Stroke, 23” Shut Height, 20” Windows, 45-90 SPM, with Air Clutch, 6” Bolster, Coe .125” x 12” Servomaster Model CPRF-S112 Servo Roll Feed, Job No. 39652 (New 2005),  Operators Console, SSC-1500 Part Revolution Control;, Honeywell Autoset 1504 Wintriss Load Analyzer, Cieco Tonnage Control, Isolation Pads

Federal 100 Ton No. 8 OBI Press, Rebuild s/n 8A103, 28”X36” Bed, 4” Stroke, 15.5” Shut Height, 50-100 SPM, Air Clutch, 2-1/2” Bolster, C-J Servo Stock Feed

Bliss 95 Ton No. 28M Back Geared OBI Press, s/n H21307, 28” x 36” Bed, 3” Bolster, Air Clutch, Rapidair 8” Servo Stock Feed, SSC-1000 Part Revolution Control, Pedestal Palm Buttons

Minster 75 Ton No. 7 OBI Press, s/n SS-7-23431, 21”X36” Bed, 6” Stroke, 15.5” Shut Height, 2-1/2” Bolster, 45 SPM, Air Clutch, 2-1/2” Bolster, Durant 12” Feed Pro Servo Stock Feed

Minster 75 Ton No. 7 Die-Namic OBI Press, s/n 7D-18378, 24”X36” Bed, 4” Stroke, 21” Shut Height, 3” Bolster, 90 SPM, Air Clutch, Coe 6” Servomaster Servo Stock Feed, Isolation Pads

Minster 60 Ton No. 6 Back Geared OBI Press, s/n 6-9343, 21” x 32” Bed, 8” Stroke, 4” Bolster, CJ 6” Rapid-Air Servo Stock Feed, Cieco Tonnage Control

Minster 45 Ton No. 5 Back Geared OBI Press, s/n 5-4928, 5-1/2” Stroke, 18” x 28” Bed

Heim 50 Ton Model 5F-OBI-F OBI Press, s/n 2517, 18” x 28” Bed, 1-1/2” Bolster, Air Clutch

U.S. No. 4 OBI Press, 14” x 21” Bed

Press-Rite No. 2 OBI Press, s/n SE-1397, 12” X 18” Bed

Press-Rite No. 1 OBI Press, s/n SE-5224, 10” x 15” Bed

Press Accessories

Littell 10,000 LB. Model 86820 Auto Centering Reel, s/n 89240, 30” Width x 60” OD

Egan/Press-Partner 18” Stock Straightener, s/n S804615

Littell No. 308 Stock Straightener, s/n 44255-51

Littell No. 60 Stock Uncoiler, s/n 86821-81

American 2,500 LB. No. 60 Stock Uncoiler, s/n 3406-1

Cooper Weymouth 2,500 LB. Stock Uncoiler, s/n 2500-12M-2206

3 – Durant 48” Model 5025-48 Pallet Style Stock Uncoilers

Toolroom Machines

Acru-Turn 16”/ 23” x40” Gap Bed Toolroom Lathe, s/n 200100464, 1800 RPM Spindle, with 3 & 4 Jaw Chucks, Inch/MM Threading, DRO

Acra 3 HP Model AM-2V Variable Speed Ram Type Vertical Mill, s/n 971294, 48” Table, Anilam Wizard D411 DRO

Bridgeport 1 HP “J-Head” Ram Type Vertical Mill, S/N 12BR43526, 42” Table

AMW 10”X20” Model GS-1020BH Hydraulic Surface Grinder, s/n 804227-4 with Electromagnetic Chuck

Havel 10”x15” Surface Grinder with Electromagnetic Chuck

Harvey Butterfly 6”x12” Model LG Surface Grinder, s/n 58, with Permanent Magnetic Chuck

Logan 8”x25” Model 825 Cabinet Base Lathe with 3-Jaw Chuck

Kalamazoo Horizontal Band Saw

Buffalo 4-1/2” Model HVBMS Horizontal/Vertical Band Saw, s/n 151417

Milwaukee Heavy Duty Magnetic Base Drill

Buffalo 15” Drill

Tool Cutter 6” Double End Carbide Tool Grinder

Tool Shop Bench Drill

Delta Bench Drill

Duro 6”Belt/9” Disc Sander

Spot Welders

Hoffman (T.J. Snow) 75 KVA Type ENK-12-75 Spot Welder, s/n 45905, Unitrol Control

T.J. Snow 75 KVA Type PR/SP Spot Welder, s/n UM001173, Unitrol Control

Federal 75 KVA Type PA-1-12 Spot Welder, s/n 19237, Entron Control

Taylor Winfield 75 KVA Type ENC—12-75 Spot Welder, s/n 59440, Entron Control

Wash Line

Manor 12” Model NU2-110M-B14 Pass Thru Parts Washer, s/n NU-2131, 0-12 FPM, 3 Heat Stations, with Air Quality Engineering Mist Controller, Paxton Model AT700 Parts Blower

Misc. Machines

Famco 16 Ga. x 52” Model A-52 Shear, s/n A60YT56

Misc. Toolroom Tooling*Press & Plant Equipment Including Die Sets*Arbor Presses*C-Clamps*Machine Vises*Rotary Table*Pin Gauge Sets*Welding Cart with Torch Set-Up*Banding Cart*Fairbanks Platform Scale*36”x48” Black Granite Surface Plate*Etc.

Plant Equipment

Yale 5,000 LB. Model GLCO50TGNUAE088 LP Gas Forklift Truck, s/n E187V08936W, 200” Max. Lift, Triple Mast, Solid Tires, Operators Guard, Side Shift

Yale 4,650 LB. Model GLCO50VXWV59083 LP Gas Forklift Truck, s/n A910V11131E, 189” Max. Lift, Triple Mast, Solid Tires, Operators Guard, Side Shift

Daewoo 4,800 LB. Model GC306-3 LP Gas Forklift Truck, s/n 95-00821, 186” Max. Lift, Triple Mast, Solid Tires, Operators Guard, Side Shift, 9,350 Hours on Meter

Fabtech 24’ Model V24/18 Electric Elevating Work Platform, s/n 7619, 1000 LB. Capacity, 48” x 90” Platform

Atlas Copco 50 HP Model GA37 Screw Type Air Compressor, s/n AII-365757

Atlas Copco Model FX11(A9) Air Dryer, S/N CA1631090 (New 2013) with 2 Air Receiving Tanks

4,000 lb. A-Frame with Chain Hoist, 8’ Between Frame

24 – 38” x 48” x 24” High Collapsible Wire Baskets

40 – 48” x 40” x 30” High Collapsible Wire Baskets

 

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here. 

Customer Support Hours:

  • Monday – Thursday, 8:00 AM EST – 10:00 PM EST
  • Friday, 8:00 AM EST – 6:30 PM EST 

Email: support@bidspotter.com

Office: (253) 858-6777      Toll Free: (866) 597-2437

Frequently Asked Questions

 

 

Terms & Conditions

Please note our deposit requirements for bidders with no bidspotter bidder history or bidder history with any negative feedback:

Insufficient Bidspotter history

Due to your insufficient Bidspotter history we may require a deposit up to $500.00 USD (refundable) before you can be approved to bid. By registering to bid for this sale, you are giving us the right to pre-authorize a deposit of $500.00 USD. This pre-authorization is immediately refundable if you do not purchase anything, or if you choose to make other payment arrangements. Once you have established a sufficient positive Bidspotter history you will not have to deposit in order to get approved.

Bidspotter history with negative feedback

Due to your Bidspotter history we will require a $2,500.00 USD deposit (refundable) before you can be approved to bid. By registering to bid for this sale, you are giving us the right to pre-authorize a deposit of $2,500.00 USD. This pre-authorization is immediately refundable if you do not purchase anything, or if you choose to make other payment arrangements. Once you have established a sufficient positive Bidspotter history you will not have to deposit in order to get approved.


All Bidders

Everything will be sold to the highest bidders for cash, in accordance with our standard Terms of Sale which can be found on our web site at www.heathindustrial.com or by requesting a copy of our terms and conditions of sale by email to auctions@heathindustrial.com.

Your bid is a contract: Place a bid only if you are serious about buying the item. If you are the high bidder, you will enter into a legally binding contract with Heath Industrial. All bids are in US dollars.

A Buyers Premium will be added to all items sold. Heath Industrial makes every attempt to accurately describe all items at the auction sale, there are always possibilities of errors occurring which is out of our control. It is important to know this fact if you plan on placing a Proxy Bid or if you plan on bidding via bidspotter.com.

Please inspect before you bid and remember, everything is sold AS IS, WHERE IS with absolutely no warranty or guarantee of any kind, either written or implied.

Payments can be via company check, cash, or wire transfer. Credit Cards are accepted for an additional fee. All successful bidders will receive their invoices via email from Heath Industrial after the last day of the auction sale.

All successful bidders will be responsible for sales taxes which may be added to your invoice unless an exemption certificate is supplied prior to invoicing.

Heath Industrial reserves the right to automatically charge payment card on file with bidspotter.com, for any and all outstanding invoices not paid within 48 hours after the close of the auction.


Removal:

Rigging and removal is the responsibility of the buyer. Small items that can be carried out should be removed immediately after the auction or at the latest, the day after the auction. All riggers or buyers who will be removing items using any powered vehicle will need to provide a certificate of insurance that is acceptable to Heath Industrial. Removal will begin when the auction sale has been completed and payment in full has been received.

If you need assistance please call us at our corporate offices @ 847-380-1755 or via email at auctions@heathindustrial.com