Lot

18

60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line

In Liquidation of Steel Slitting Operation with C...

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 419-536-4445 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
1/34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 1 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 2 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 3 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 4 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 5 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 6 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 7 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 8 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 9 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 10 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 11 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 12 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 13 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 14 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 15 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 16 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 17 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 18 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 19 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 20 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 21 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 22 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 23 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 24 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 25 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 26 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 27 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 28 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 29 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 30 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 31 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 32 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 33 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 34 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 1 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 2 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 3 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 4 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 5 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 6 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 7 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 8 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 9 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 10 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 11 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 12 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 13 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 14 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 15 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 16 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 17 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 18 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 19 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 20 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 21 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 22 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 23 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 24 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 25 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 26 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 27 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 28 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 29 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 30 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 31 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 32 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 33 of 34
60,000 LB x 60" x .104" Gauge PRO-ECO Cut-to-Length Line - Image 34 of 34
100,000 USD
Canton, Ohio
0.00%
18.00%
Max Coil Capacity:  60,000 lbs.
Max. Coil Width:  60" 
Max. Coil O.D.:  72" 
Coil I.D.:  20" - 24" 
Material Thickness: 0.104" Max.
 
Consisting of the following:
 
-(2) Coil Staging System for Coil Car:
 
-Entry Coil Car:
  Pit Type
 
-Pro Eco Uncoiler:
  Hydraulic Expansion
  Pumpkin Tooth Mandrel
  Powered Holddown Roll
  Threading Drive
  Air Clutch and Brake
  Sliding Base 
  
-North American Edge Guide System:
 
-Peeler Table:
  Model:  PB-104 
  Driven Pinch Rolls
 
-Edge Trimmer:
  Double Stub Type
  Powered Width adjustment on Heads
 
-Scrap Winder: 
  Hydraulic Motor Powered
  Oscillate Wind
  Powered Opening for Scrap Dump
 
-Pro Eco Leveler: 6 HI
  Width:  60" 
  Entry Driven Pinch Rolls
  Number of Work Rolls:  19; 9 over 10 
  7 Flights of Backups
  5 Flights Motorized w/Joystick adjustment
 
-Looping Pit:
  Entry and Exit Catenary Rolls
  Crossover Table
 
-Pro Eco Roll Feed Unit: 
  Entry Strip Holddown
  Entry Passline Rolls
  Unico Drive
 
-Pro Eco High Speed Mechanical Shear:
  Model:  MCS104-60-300 
  Max. Capacity:  0.104" 
  300 Strokes/Min.
  AC Drive Motor w/Air Clutch
  Wichita Brake
 
-Pro Eco Runout Table:
  Twin Driven Belts
      
-Pro Eco Stacker:
  Powered Width Adjustment
  Powered Length Adjustment
  Scissors Lift Table w/Powered Conveyor Rolls
  Side Discharge Design 
 
-Exit Conveyor:
  Powered Conveyor Rolls
  w/15,000 lb. Built-In Scale
 
-Operator Control Panels:
 
-Line Direction: Right to Left
Max Coil Capacity:  60,000 lbs.
Max. Coil Width:  60" 
Max. Coil O.D.:  72" 
Coil I.D.:  20" - 24" 
Material Thickness: 0.104" Max.
 
Consisting of the following:
 
-(2) Coil Staging System for Coil Car:
 
-Entry Coil Car:
  Pit Type
 
-Pro Eco Uncoiler:
  Hydraulic Expansion
  Pumpkin Tooth Mandrel
  Powered Holddown Roll
  Threading Drive
  Air Clutch and Brake
  Sliding Base 
  
-North American Edge Guide System:
 
-Peeler Table:
  Model:  PB-104 
  Driven Pinch Rolls
 
-Edge Trimmer:
  Double Stub Type
  Powered Width adjustment on Heads
 
-Scrap Winder: 
  Hydraulic Motor Powered
  Oscillate Wind
  Powered Opening for Scrap Dump
 
-Pro Eco Leveler: 6 HI
  Width:  60" 
  Entry Driven Pinch Rolls
  Number of Work Rolls:  19; 9 over 10 
  7 Flights of Backups
  5 Flights Motorized w/Joystick adjustment
 
-Looping Pit:
  Entry and Exit Catenary Rolls
  Crossover Table
 
-Pro Eco Roll Feed Unit: 
  Entry Strip Holddown
  Entry Passline Rolls
  Unico Drive
 
-Pro Eco High Speed Mechanical Shear:
  Model:  MCS104-60-300 
  Max. Capacity:  0.104" 
  300 Strokes/Min.
  AC Drive Motor w/Air Clutch
  Wichita Brake
 
-Pro Eco Runout Table:
  Twin Driven Belts
      
-Pro Eco Stacker:
  Powered Width Adjustment
  Powered Length Adjustment
  Scissors Lift Table w/Powered Conveyor Rolls
  Side Discharge Design 
 
-Exit Conveyor:
  Powered Conveyor Rolls
  w/15,000 lb. Built-In Scale
 
-Operator Control Panels:
 
-Line Direction: Right to Left

Liquidation of Steel Slitting Operation with Complete Production Lines

Ends from
Venue Address
1501 Raff Road SW
Canton
Ohio
44710
United States

removal for smaller lots begin on 8/29 and will be until 9/02. larger items will need to be scheduled accordingly. 

Rigging Companies:

Mark Teran  312-287-7457 

Ruby 219-613-2633

 rubyamatulli@cs.com

Important Information

=====================================================

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here

Customer Support Hours:

  • Monday – Friday, 8:00 AM ET – 8:00 PM ET

Email: support@bidspotter.com

Office: 253-858-6777 Toll Free: 866-597-2437

Frequently Asked Questions

Terms & Conditions

G-2000, INC. TERMS AND CONDITION FOR TIMED ONLINE SALES: These terms are subject to amendments and modifications announced by the Auctioneer at the time of the auction. Any person participating in the auction shall be bound by the following terms and conditions. The Auctioneer does not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any listings specified herein.

G-2000, Inc. may, at its discretion, require a deposit prior to approval to bid online in order to establish credit and verify identity. The deposit will be applied to the bidder’s balance at the end of the sale, with any excess being refunded in the same manner the deposit was paid. Bidders that do not purchase any items at the sale will receive a full refund of their deposit.

Everything will be sold to the highest bidder or bidders for cash in accordance with the Auctioneer’s Terms and Conditions. Payment in full is required within 24 hours of receipt of auction invoice. Invoices will be sent to the e-mail registered with Bidspotter.com. All payments may be made by cash, wire transfer, major credit card, certified check, company check with a bank letter of authorization guaranteeing irrevocable payment to G-2000, Inc.

A Buyer`s Premium will apply for all sales. Online bids will carry a  % Buyer’s Premium, and all purchases made with a credit card will be an additional 3% Buyer’s Premium (%). All sales are final, on an "As is", "Where is", "In Place", "With all faults" basis with no conditions or warranties, whether expressed, implied, statutory or otherwise, including without limitation, warranties or conditions as to title, description, fitness for purpose, quantity, merchantability, state conditions, location or otherwise.  By submitting a bid, the bidder affirms he has inspected all items before bidding. Purchasers shall be deemed to have relied entirely upon their own inspection and investigations.

Each buyer will be subject to any sales tax chargeable by city and/or the state in addition to the bid price for any asset as purchased, unless proper and acceptable evidence of a certificate of exemption is presented to G-2000, Inc. at the time of payment.

Rigging and removal of sold equipment is the sole responsibility of the buyer. Rigging and removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging requiring the use of forklifts, cranes, etc., whether performed by the customer or a rigging company, must present a certificate of insurance for $1,000,000.00 naming G-2000, Inc. as the insured.

Removal of Paid Equipment must be complete by the posted deadline. Items not removed by this deadline will be considered abandoned with no refund unless other arrangements are approved by the Auctioneer.

See Full Terms And Conditions