This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 319-266-3578 for more information.
You are the current highest bidder! To be sure to win, log in for the live auction broadcast on or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
Auctioneer has chosen not to publish the price of this lot
Muscatine, Iowa
0.00%
18.00%

Equipment Marketers and Appraisers

Approximately (3) assorted pipe wrenches, various sizes, various conditions.

Auctioneer:

Equipment Marketers and Appraisers
Approximately (3) assorted pipe wrenches, various sizes, various conditions.

By Order of Secured Creditor - Major Fabrication & Machinery Auction

Sale Date(s)
Venue Address
3206 Hershey Ave., Building B
Muscatine
Iowa
52761
United States

We are making things easier for you, auction specific shipping information coming soon. For now, please visit the Important Information / Terms & Conditions tab [next tab to the right] for auction specific removal dates, preferred vendors and more.

For general shipping information from the auctioneer please see below:

General delivery information available from the auctioneer

Larger Shipping items we recommend www.mbebrighton.co.uk

Important Information

By Order of Secured Creditor - Major Fabrication & Machinery Auction 

Live and Online Bidding!

Auction Date: Thursday, July 18, 2019 at 9:00 am CDT

Location: 3206 Hershey Ave. Bldg B Muscatine, Iowa

InspectionJuly 17, 8:00-5:00PM (or by appointment).

Removal: 

Buyers are responsible to remove all purchases at Buyers expense and according to date and time restrictions.  All items must be paid for in full according to Payments Terms and Conditions.  Removal will begin on July 18, 2019.   There will be no removal on Sunday, July 21, 2019.  Removal will resume on Monday, July 22, 2009, from 8:00 a.m. - 6:00 p.m.  Purchased items need to be removed July 31,2019. 

The air compressors have a delayed delivered date. 

Shipping and Handling:  Buyers desiring to have purchases prepared for shipping will be charged a fee of $40.00 per hour (one hour minimum) plus the cost of materials for boxing or crating.  Payment must be completed before shipping commences.  Buyer is responsible for all shipping arrangements.

Buyer’s Premium: 18% Buyers premium online. 

Day 2 - Featuring:

Tube mill:

AEF Tube mill, 2"x.038", components: 1) decoil reel, 12" width, 48" diameter, 2-sided, this works with the tube mill; 2) pneumatic cut-off station with a pneumatic knife approximately 8" width; 3) Kent Corporation continuous accumulator, model R22LE, s/n 9131RB, hydraulic type, designed to keep a continuous feed of coiled steel into the former, approximately 84" diameter, freestanding, hydraulic control; 4) roll forming station, (6) stand with 1" arbors, direct drive, powered by a Reliance AC motor, 400 hp motor, s/n W328123T1-HY, 500 volt; Induction welding station powered by a SF– GGP solid-state high-frequency power supply, which was purchased new in 2017, 5) cooling and lubrication station, appears to be custom built with (20) coolant nozzles, this station is approximately 13' length; 6) AEF 4-stand straightener, 1" diameter arbors, Reliance AC motor, 30 hp motor, type TR, s/n U326925TL2-LX, 500 volt, 49 amp; 7) flying cut-off, Alpha Press machine FR-8-Z-30, s/n 47, capacity is 2.00 OD, .083 wall, 48" traveling head, Includes Talleyrand PLC control,8)  collection table, maximum length 20', (2) freestanding control panels, it does have a central control panel with Siemens controls, Series Simoreg.  Sells with owners confirmation.

Addison Tube mill, This line consists of the following components: (1) Kent Corporation double-sided decoy reel 2001 model S Kd 6000, serial number 3197/ADD UNC1, 6000 pound capacity, minimum ID17 inches, maximum ID 21 inches, maximum coil width 12 inches, maximum coil OD 60 inches, pneumatic brake; 1) Fronius tig welder with watercooled torch, (1) manual flat sheer, (1) first stage forming Addison seven stand with edge alignment between each stand, 1 1/2 inch arbors, manual adjustment, each stand is powered, also includes; (1) E FD welder Elva Induksjon power supply model IMC 150/1.8 – 300, serial number 100333, new in 2001, input voltage 640, output voltage 1152, 150 KW, includes a sizing station after welder; (1) Rotary scarf station, (1) next station is a cooling tunnel approximately 10 foot length, next station (1) is an Addison sizing forming station three stands with horizontal sizing roles, includes an additional sizing station; (1) Alpha Thermo tool flying cut off with control PLC control, (1) final collection rack. This entire system is controlled by an Addison control station model AM – 2250 – U serial number 1036.  Thisl ine sells with owners confirmation.

2013 Gasparini tube mill was originally designed for the production of 1½ inch thin wall tube. This machine is currently nonfunctioning, it has been partially disassembled. Contact Auction company for details.

2013 Gasparini roll former Model TRO 65 SI, TI PO 1.T.S.1,Consisting of the following components (1) decoy real; leveling and straightening station, manual type; (thirteen) stand roll forming 1 ½” arbors, currently is set to form angle iron, next station is the cutoff, Currently this line needs maintenance and troubleshooting on the control before it can be put back into production. 

CNC Press Brake:

2015 Cincinnati model 90 PDF Plus 8, Pro Forma series, five axis control, Press brake, s/n 55695, 8" stroke, 90-ton capacity, 10' overall, 8'6" between the housings, 4" die rail,  freestanding control panel, color touch screen, Link Lite Black Max safety lighting has very good eye appearance.

CNC Laser

2009 Cincinnati model CL6 Co2 Laser, s/n 54289, 5'x10' GE Fanuc laser control, resonator C2000I-model B,  35068 hours on the meter for the resonator,   (2) cutting tables with shuttle relay, Windows based control, 2,000 watt, includes the coolant Koolant Koolers water cooler model HCV7/500PR-NF -FILT, s/n 29699, hp is 7.5, PLC control, there is no dust collector, includes a transformer. 

CNC VMC

2011 Haas Vertical machining center, model VF-3SS, s/n 1082247, 360/480 volt, 3-phase, the table is 20"x48", has flush coolant, carousel side mounted tool changer, 24-tool, chip auger, high pressure coolant.  Rigid tapping, macros, rotational and scaling, M19 spindle orientation, 12000 RPM, CAT 40 spindle, no 4th axis wired, x axis 40, Y 20" Z 25",.  

CNC Router

2007 Haas model GR510 Master Cam Vertical machining center/Router, gantry type, s/n 1054118, Vector drive 20/15 hp, X axis 121", Y axis 61", Z axis 11", spindle nose to table maximum 13.5", spindle nose to table minimum 2.5", has coolant, the table is 53" left/right, 122" front/back, this is not a T-slotted table it is a milled table with tapped holes, 62" between columns, 15Hp spindle, maximum 10000 RPM,  Haas control, 3-axis machine, it does have the wiring for the 4th axis, has good eye appearance, 10-tool automatic tool changer with CAT 40 tool holders. 

CNC Robotic Welder

2015 Fanuc robotic welding cell, consisting of the following: (1) Fanuc robot type AO5B – 2611 – B122, F161700, serial number E15230775, (yellow in color) (1) Lincoln power reaming tip cleaner, (1) Lincoln electric automation solution indexing stations current fixture size 8’ x 46”, (1) Fanuc teach pad, type a 5B – 225 – C105 EAW, (1) Lincoln power supply R500 power supply, serial number U1150806325, Slick light curtain safety cage. 

CNC Angle Roller

2007 Tauring model Delta 60 CNC -C angle roll, 3-bar, s/n 060D-621, takes up to 6" diameter roll OD, freestanding programmable control, has good eye appeal, appears to be in good condition.  Currently needs repair. 

1997 Tauring angle roll, model SE-CNCS- 2-OM- Delta 40 CNCS 3-bar, s/n 179, freestanding push button control, CNC-S programmable PLC control, assorted rolls, appears to be in good condition.  

CNC Tube Benders

1989( Refurbished in 2016) Eaton Leonard CNC tube bender, model Vector bend, SN VB200HP-R-004-MTL-12-89, hydraulic mandrel, 3" maximum OD,  the machine was complete refurbished and a new control was added, the control is a BendPro G2, freestanding, touch screen.

Too much to list!!! Do not miss this sale. 

 

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here. 

Customer Support Hours:

  • Monday – Thursday, 8:00 AM EST – 10:00 PM EST
  • Friday, 8:00 AM EST – 6:30 PM EST 

Email: support@bidspotter.com

Office: (253) 858-6777      Toll Free: (866) 597-2437

Frequently Asked Questions

 

Terms & Conditions

Terms & Conditions

  1. Bidspotter.com, “SELLER” Lincoln Savings Bank, Waterloo, Iowa and “AGENT” Equipment Marketers & Appraisers of P.O. Box 369, Cedar Falls, Iowa 50613, reserve the right to alter or amend the terms and conditions of any scheduled auction item at its sole discretion. Announcements made during the auction supersede any previous announcements whether oral or written. Do not bid unless you intend to pay for all purchases.
  2. Bidspotter.com, “SELLER” and “AGENT” offers to BIDDER(S)/BUYER(S) the opportunity to place bids and potentially become the highest bidder. The opportunity to participate can be withdrawn or denied by Bidspotter.com, “SELLER” and “AGENT” at any time upon Bidspotter.com, “SELLER” and “AGENT”’S sole discretion. By extending to BIDDER(S)/BUYER(S) the opportunity to participate, BIDDER(S)/BUYER(S) accepts all terms and conditions set forth. BIDDER(S)/BUYER(S) acknowledges and agrees to have the ability to competently participate and place bids in an on-line auction protocol. BIDDER(S)/BUYER(S) agrees to have read and understand all terms and conditions set forth, to have the knowledge and ability to utilize on-line bidding applets and procedures. Furthermore, BIDDER(S)/BUYER(S) guarantees and conveys to “SELLER” and “AGENT” to be completely responsible for all bids submitted. Furthermore, BIDDER(S)/BUYER(S) agrees to be in complete control of BIDDER(S)/BUYER(S)’S bidding decisions and amounts procured. Furthermore, BIDDER(S)/BUYER(S) agrees to pay the invoiced amount without recourse to Bidspotter.com, “SELLER” and/or “AGENT”.
  3. All persons desiring to bid shall register with Bidspotter.com, “SELLER” and “AGENT”. Registering will consist of providing all information requested by Bidspotter.com, “SELLER” and “AGENT”. All persons registering guarantee the provided information to be accurate. All registered Bidder(s)/Buyer(s) will warrant those authorized to bid on their behalf have their specific authority as a Bidder(s)/Buyer(s). Bidspotter.com, “SELLER” and “AGENT” reserves the right to refuse any applicant the opportunity to register and/or place a bid and may revoke such privilege at any time, at its sole discretion.
  4. On-line bids require the use of technology and the World Wide Web. Bidspotter.com, “SELLER” and “AGENT” and on-line bidding applet does not guarantee to BIDDER(S)/BUYER(S) the complete and continuous availability of the technology or the World Wide Web being available to be used. BIDDER(S)/BUYER(S) acknowledges the technical requirements to be able to participate on on-line auction can be influenced by computer hardware, software and BIDDER(S)/BUYER(S) or BIDDER(S)/BUYER(S)’S agent’s skill to utilize technology and the bidding applet. Bidspotter.com, “SELLER” and “AGENT” and on-line bidding provider will be held harmless and not responsible for BIDDER(S)/BUYER(S)’S inability or experience to utilize such technology and the World Wide Web. Furthermore, BIDDER(S)/BUYER(S) will hold Bidspotter.com, “SELLER” and “AGENT” and third-party on-line provider harmless from all claims, suits and damages if technical issues arise which prevent the BIDDER(S)/BUYER(S) from participating in the bidding process.
  5. Bidder(s)/Buyer(s) acknowledges and agrees all goods have been available prior to sale time. Bidder(s)/Buyer(s) agree to purchase all goods with all defects known and unknown. All items sold are considered used. DO NOT BID UNLESS YOU HAVE DETERMINED THE CONDITION OF THE LOT FROM YOUR OWN EXAMINATION. Bidder(s)/Buyer(s) acknowledges sole responsibility and assumes the risk a lot might change after it has been inspected. Bidspotter.com, “SELLER” and “AGENT” will sell lot(s) as it exists at time sold, as is, where is, like is, with no warranties or guarantees whether implied or expressed. Including warranties as to the merchantability or fitness for particular use or purpose. Seller Agent has gathered information thought to be reliable. Furthermore “Agent” shall have no responsibility whatsoever for any information provided to any BUYER(S).
  6. Bidder(s)/Buyer(s) represents to Bidspotter.com, “SELLER” and “AGENT” the Bidder(s)/Buyer(s) are financially solvent and will surrender payment in full according to the terms set forth.  “AGENT” will submit to BUYER(S) an invoice stating all amounts owed. BUYER(S) acknowledges and agrees to pay invoiced amount owed according to terms and conditions set forth. If BUYER(S) fails to pay the invoiced amount in accordance with sales terms, BUYER(S) agrees to remain responsible for payment of the invoiced amount. Until “AGENT” has received payment in full of the invoiced amount “AGENT”, BUYER(S) shall have no right to remove any of the purchase items from the auction site(s). All purchases must be paid in full the day of the auction and shall be removed from the premises within the time specified by the Bidspotter.com, “SELLER” and “AGENT”. Payment shall be in the form of cash, cashier checks, preapproved company check, wire transfers, credit cards plus a 3% transaction fee.
  7. In the event of nonpayment, Bidspotter.com and “AGENT” shall have the right to commence all legal actions against BUYER(S) for collection of the entire invoiced amount. Furthermore, BUYER(S) agrees to be liable and pay for any and all expenses incurred by Bidspotter.com and “AGENT” efforts to collect all unpaid invoiced amounts. Expenses will include but not limited to attorney or collection fees, agency fees, court cost, handling fees, storage fees and transportation fees. Not forbearance, indulgence, or delay by Bidspotter.com and “AGENT” taking action herein under is deemed a waiver of any rights of Bidspotter.com and “AGENT”. A dishonored check shall be conclusive evidence the Buyer(s) is insolvent and entitles Bidspotter.com and “AGENT” to such remedies available under applicable laws.
  8. Title shall pass to BIDDER(S)/BUYER(S) upon the satisfactory completion of all of the following:  8A) “AGENT” receipt of full payment for the purchased items in accordance with the sale terms. 8B) The purchased items have been removed from the real property in compliance with terms and conditions set forth. 8C) BIDDER(S)/BUYER(S) shall not be in breach of any of the items set forth in the terms and conditions.
  9. BUYER(S) agrees its acceptance of purchased items shall constitute an acknowledgement by BUYER(S) the purchased items satisfy any and all obligations of “AGENT” hereunder. BIDDER(S)/BUYER(S) may not revoke its acceptance for any reason whatsoever. All sales are final.
  10. All goods will be put in lots and will be sold to the highest bidder for cash. The record kept by the clerk of sale together with the marked catalog of Bidspotter.com, “SELLER” and the “AGENT” shall in all cases be accepted as final. Bidspotter.com, “SELLER” and “AGENT” reserves the sole right to change the order of the sale, the size of the lots, the addition or subtraction of a lot number. Bidspotter.com, “SELLER” and “AGENT” will have the sole right to determine the bidding increment. In the event of a Buyer(s)’s dispute or tie bid, the Bidspotter.com, “SELLER” and “AGENT” has the sole right to either open up the bidding for continued advancement or strike the goods sold. Bidspotter.com, “SELLER” and “AGENT”, in its sole discretion, reserves the right to refuse any bid which it considers to be insignificant advance over the preceding bid.
  11. Any errors in accounting toward Buyer(s)’s invoice will be corrected according to the actual facts. Buyer(s) agrees to pay the amount owed. Buyer(s) shall not be entitled to possession of any of his purchases until total purchase price of all his items have been paid in full. In the event Buyer(s) fails to pay the full purchase price of any lot within the prescribed time or fails to comply with any terms of sale “AGENT” shall have retained a possessory lien on all lots of purchaser and at its sole discretion has the right to resell such lots by public or private sale without notice of any kind to Bidder(s)/Buyer(s).
  12.  Any printed literature used by Buyer(s) such as a catalog, shall only act as an announcement of the items available for sale.
  13. The auction sale site shall include any location upon which a lot is located for display and or removal. Auction sales sites are considered potentially dangerous places and immediately upon registration, if not before, Bidder(s)/Buyer(s) shall so notify agents, servants, and employees and others accompanying him.
  14. All claims or disputes must be settled on the day of the sale. No claims will be allowed after the removal of goods. The Laws of Iowa shall govern this agreement.
  15. Appropriate taxes will apply. Tax exemptions accepted if Buyer(s) produces proper documentation of their exemptions.
  16. Buyer(s) will be responsible for complete removal of all goods purchased. Cost of removal will be the responsibility of the Buyer(s). In the event the Buyer(s) fails to remove any such lot or part thereof within said period, the “AGENT” or its designees shall have the right but shall be under no obligation to do so either in the name if the “AGENT” or other Seller or the Buyer(s) to remove, store, abandon, discard, sell or otherwise dispose of each of any part of lot bid in or purchased at the expense and risk of the Bidder(s)/Buyer(s) without waiving any other rights that the “AGENT” or other Seller may have against the Buyer(s).
  17. “AGENT” reserves the right to require proof of adequate insurance coverage from any Buyer(s) of lots requiring dismantling, rigging, or hot cutting.
  18. If Buyer(s) or their agents cause damages to the real property of the auction sale site, Buyer(s) will be liable for all damages and pay for all repairs to the satisfaction of the “AGENT” and the owner of the real property.
  19. The Bidder(s)/Buyer(s) shall be and shall continue to be liable for all lose, expense, and damage directly sustained by the “AGENT” or “Seller” by reason of the failure of the Bidder(s)/Buyer(s) to comply with the foregoing conditions.
  20. Inspection date: July 17, 8:00-5:00PM (or by appointment).

Removal:  Buyers are responsible to remove all purchases at Buyers expense and according to date and time restrictions.  All items must be paid for in full according to Payments Terms and Conditions.  Removal will begin on July 18, 2019.   There will be no removal on Sunday, July 21, 2019.  Removal will resume on Monday, July 22, 2009, from 8:00 a.m. - 6:00 p.m.  Purchased items need to be removed July 31,2019. 

The air compressors have a delayed delivered date. 

Shipping and Handling:  Buyers desiring to have purchases prepared for shipping will be charged a fee of $40.00 per hour (one hour minimum) plus the cost of materials for boxing or crating.  Payment must be completed before shipping commences.  Buyer is responsible for all shipping arrangements.

Buyer’s Premium:  15% Buyer’s Premium will be added to all successful bid amounts. 18% Buyers premium online.

 

See Full Terms And Conditions

Tags: Wrench