Auction closed
Timed auction

Auction dates

  • Ended 11 Jan 2024 13:18 CT (19:18 GMT)

Viewing dates

  • By appointment only

Auction details

Currency: USD
Buyer's premium: 18.00%
VAT/sales tax on hammer: 7.00%

Venue address

424 E Inglefield Rd, Evansville, Indiana, 47725, United States

Auction house

Add to favourites Ask a question phone_in_talk (812) 308-6400

Refine your search

Estimate

Filter by Price Range

Primary Category

Category

Brand

Item Type

State/Province

Town/City

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
154 item(s)
  • List
  • Grid
  • 154 item(s)
    /page

This auctioneer has chosen to not publish their results. Please contact them directly for any enquiries.

Every lot in this auction is located in Evansville, Indiana except for lot 0A. Lot 0A is located in Whitestown, Indiana.  Removal for lot 0A is b...

Used Large Lot of Recently Removed Modern Office Furniture with: Inventory includes: 2- drawer cabinets - 58 End leg units – 34 Inline legs – 36 ...

Used Hobart Mixer with: Capacity: 20 quart mixer(3) fixed speeds1/3 horsepower motor1725 RPMElectrical: 110 volts, 60 hz, phase 1 Skidding, Riggin...

Used Hobart B-20 Planetary Mixer with: Bowl capacity: 20 litersVariable mixing speeds: Low: 100 rpmMedium: 180 rpmHigh: 400 rpm Overall dimensio...

Used Stainless Steel Hydraulic Mixing Bowl Tipper with: Hydraulic lifting mechanismManual switchesStainless steel constructionLifting fork dimensi...

Used Stainless Steel Hydraulic Mixing Bowl Tipper with: Hydraulic lifting mechanismManual switchesStainless steel constructionLifting fork dimensi...

Used Stainless Steel Hydraulic Mixing Bowl Tipper with: Hydraulic lifting mechanismManual switchesStainless steel constructionLifting fork dimensi...

Used AzTech EZT-600 E-Z Tilt Tote Dumper with: Maximum tilt weight: 600 poundsMaximum lift height: 71 inchesProduct dimensions: Width: 48 inches...

Used Beehive RSP 12 High Capacity Potato Processor with: Application: Ground, Formed and Portioned ProductsSliced ProductsMechanically Separated...

Used Moline Sheeter with: Belt dimensions: Length: approximately 24 feetWidth: 24 inchesHeight: 36 inches 7 separating wheels 3 inches between...

Used Rondo SFA 612 Dough Sheeter with: Conveyor: Width: 22 inchesLength: 62 inches Maximum dough width: 21 inchesThickness:  Minimum: 0.4 inch...

Used Rondo SFS 611 Automatic Dough Sheeter with: Automatic, reversible dough sheeterConveyor dimensions:  24.75 inches wide x 130 inches longConve...

Used Accutek Inkject Printer with: Automatic viscosity controlAutomatic ink bleed control825 millimeter cartridge with automatic meterCharacter wi...

Used Dual Shaft Auger Mixer with: Approximate capacity:  30 cubic footMixing tank dimensions:  41 inches wide x 27 inches deep x 48 inches longDis...

Used Mateer-Burt 1800B Auger Filler with: Servo motor drivenHopper dimensions:  15 inches deep x 21 inch base diameterApproximate hopper capacity:...

Used Cherry Burrell HCIF Auger Ingredient Feeder with: Auger product feedAuger flights: 4 inchesDischarge diameter: 4 inchesPhoto eye product insp...

Used Sackett Systems Pivot Tote Dumper with: Infeed dimensions: 51 inches wide x 42 inches long x 31 inches high3 horsepower motorDischarge convey...

Used Rheon Dough Laminating and Stretching System with: Pile Up Table Model number: PC 011Serial number:  166 Parallel Piler Model number:  LM...

Used 36" Rotary Accumulation Table with: Diameter: 36 inchesInfeed height: 42 inchesStainless steel table topVariable frequency driveProduct guide...

Used 36" Rotary Accumulation Table with: Diameter: 36 inchesStainless steel constructionOn castersFixed speedElectrical requirements: 115 volts, 6...

Used 40" Rotary Accumulation Table with: Diameter: 40 inchesVariable frequency driveStainless steel constructionOn casters1/8 horsepower motorElec...

Used 48" Rotary Accumulation Table with: Diameter: 48 inchesInfeed height: 44 inchesStainless steel table topVariable frequency driveGuide railAdj...

Used Air Products Cryo Quick Nitrogen Freezer Tunnel with: Two control panelsFour sectionsOverall dimensions: Length: 69 feetWidth: 45 inchesHei...

Used Fuji Formost Horizontal Flow Wrapper with: Max product width: 4.25 inchesCenters: 7.5 inchesSeal jaw length: 8 inchesDischarge belt dimension...

Used Cooling/Drying Tunnel With: Tunnel dimensions: Length: 8 feetWidth: 25 inchesHeight: 12 inches Hinged plastic belt: Width: 23.75 inches I...

Used Massman Automation Horizontal Form Fill and Seal System with: Model: HFFS-IM0800Production speed: Up to 50 stand up pouches per minute Prod...

Used Crown DMT-40 Direct Steam Tilting Kettle with: Capacity: 40 gallonsStainless steel cabinetM.D.M.T. 32 degrees Fahrenheit at 35 PSI316 stainle...

Used Volpak S-200-D Horizontal Form Fill and Seal with:  Sachet dimensions:  Minimum: Height: 60 millimetersWidth: 60 millimeters Maximum:  ...

Used Volpak S-200-D Horizontal Form Fill and Seal with:  Sachet dimensions:  Minimum: Height: 60 millimetersWidth: 60 millimeters Maximum:  ...

Used Horizontal Rollstock Thermoformer with: Film roll diameter: 2 inchesDischarge conveyor dimensions: Length: 5 feetWidth: 1 foot Last used fo...

Used 3M-Matic Top and Bottom Manual Case Taper with: Output: up to 20 cases per minuteMinimum case dimensions: Length: 5.87 inchesWidth: 4.5 inc...

Used 3M-Matic Top and Bottom Manual Case Taper with: Output: up to 20 cases per minuteMinimum case dimensions: Length: 5.87 inchesWidth: 4.5 inc...

Used Lantech SW-3000 Automatic Side Seal Shrink Wrapper: Speed: up to 75 packages per minuteMaximum product dimensions: Length: 40 inchesWidth: ...

Used Belshaw C10G-24LH Donut Fryer with: Capacity: up to 374 dozen per hourFrying length: 10 feetFrying width: 24 inches6 donuts per pocketNatural...

Used Belshaw C10G-24LH Donut Fryer with: Capacity: up to 374 dozen per hourFrying length: 10 feetFrying width: 24 inches6 donuts per pocketNatural...

Used Crown Foods Tilting Steam Kettle With: Capacity: 10 Gallons Max working pressure: 50 PSI at 298 degrees Fahrenheit Manual tiltLow water i...

Used Steam Kettle: Capacity: approximately 40 gallonsJacket coverage: 1/2Side scrape agitationDual flap coverManual tiltStainless steel constructi...

Used Middleby Marshal Oven With: Infeed: Length: 53 inchesWidth: 41 inchesHeight: 5 inches Oven access panel with viewing glass: Length: 38 in...

Used Middleby Marshal Oven With: Infeed: Length: 53 inchesWidth: 41 inchesHeight: 5 inches Oven access panel with viewing glass: Length: 38 in...

Used Middleby Marshal Oven With: Infeed: Length: 53 inchesWidth: 41 inchesHeight: 5 inches Oven access panel with viewing glass: Length: 38 in...

Used Middleby Marshal Oven With: Infeed: Length: 53 inchesWidth: 41 inchesHeight: 5 inches Oven access panel with viewing glass: Length: 38 in...

Used Middleby Marshal Oven With: Infeed: Length: 53 inchesWidth: 41 inchesHeight: 5 inches Oven access panel with viewing glass: Length: 38 in...

Used Middleby Marshal Oven With: Infeed: Length: 53 inchesWidth: 41 inchesHeight: 5 inches Oven access panel with viewing glass: Length: 38 in...

Used IMA BFB Horizontal Flow Wrapper with: Speed: up to 40 bundles per minuteProduct size range: Minimum dimensions: Length: 50 millimetersW...

Used MBC Food Machinery Corporation 3-100 Ravioli Extruder with: 6 rows of productGuillotine attachmentTwin Screw feed systemEmergency E stopAdjus...

Used Groen D-30 Kettle With: Capacity: 30 gallons Kettle dimensions: Diameter: 24 inchesDepth: 20 inches Half jacket: 25 PSI at 300° F Manua...

Used Groen D-60 Steam Kettle With: Capacity: 60 Gallons Dimensions: Diameter: 30 inchesDepth: 25 inches Half jacketed: 25 PSI at 300° F Hand...

Used B&G Machine Company Mixing Tank With: Capacity: 100 GallonsJacketed: 60 PSI at 300° FDual hinged coverTriple blade mixing attachment with bot...

Used Pearson Case Erector with: Speed: up to 35 cases per minuteCase size: Maximum: Length: 23.5 inchesWidth: 16 inchesHeight: 18.5 inches M...

Used Formost Fuji FW3400A-5 Flow Wrapper with: Print registered horizontal flow wrapperInfeed length:  100 inchesManual product loadLugged infeedL...

Used Marq HPE215 Case Erector with: Minimum case dimensions: Length: 6 inchesWidth: 5.25 inchesHeight: 3.5 inches Maximum case dimensions: Len...

Used Hinds-Bock 5P-08WT table top 5 piston muffin depositor with:  Pan sizes up to 26.5 inches wideUp to 1200 dozen muffins per hour depending on ...

Used Hinds-Bock 5P-08WT table top 5 piston muffin depositer with:  Pan sizes up to 26.5 inches wideUp to 1200 dozen muffins per hour depending on ...

Used Lot of (3) Tables with: Stainless steel constructionOn castersTable 1 overall dimensions: Length: 36 inchesWidth: 24 inchesHeight: 39 inche...

Used Heat Seal 8.5" Tall Aperture Heat Shrink Tunnel with: Aperture dimensions: Length: 18 inchesHeight: 8.5 inches Tunnel length: 32 inchesConv...

Used Weldotron Heat Shrink Tunnel with: Aperture dimensions: Width: 22 inchesHeight: 14 inches Infeed height: 34 inchesTunnel length: 54 inchesT...

Used Shanklin Heat Shrink Tunnel with: Aperture dimensions: Width: 18 inchesHeight: 12 inches Conveyor width: 11 inchesTunnel length: 32 inchesW...

Loading...Loading...
  • 154 item(s)
    /page

Recently Viewed Lots